凝固过程中的颗粒推斥

颗粒推斥是材料在固液相变过程中的基础问题之一，界面自由能的传统理论难以解释在金属基复合材料制备过程中的颗粒推斥现象，作者提出了固液界面前沿的流体流动是颗粒推斥的主要原因之一，并给出颗粒滚动及颗粒速度两种作用机制，推导出颗粒推斥条件判据，并以实验验证流体流动的作用机制及颗粒推斥理论判据。     

Determination of heavy metals and volatile aromatic compounds in used engine oils and sludges

Assessment of contaminant releases during utilization of used oils is essential for the determination of environmental acceptability. These paper reports the results of the study examining a toxic metal leachability from used engine oil and sludge samples employing leaching test (TCLP). The leaching test indicated that lead in oil samples exceeded 5-ppm concentration level what qualified them as a toxic waste. The samples of contaminated sludge were found to contain high concentration of total lead, barium and chromium, but the leaching test showed concentration below regulatory limit. The total content of benzene, ethylbenzene, toluene, and xylenes (BETX), and naphthalene in used oil and sludge samples was also determined and was found not to be a significant factor to contamination.     

FTIR estimation of free fatty acid content in crude oils extracted from damaged soybeans

A user-interactive computer-assisted Fourier transform infrared (FTIR) method has been developed for estimation of free fatty acids (FFA) in vegetable oil samples by deconvolution of the infrared (IR) absorbances corresponding to the triglyceride ester and FFA carbonyl bonds. Peak areas were used to determine FFA as a percentage of the total carbonyl areas in weighed standards of refined, bleached, deodorized soybean oil containing from 0 to 5% added oleic acid. These data for percent FFA by FTIR were compared to corresponding FFA data obtained by two titration methods-the AOCS Official Method Ca 5a-40 and the Official Method with a slight modification. Correlation coefficients were 0.999 for the Ca 5a-40, 0.999 for the modified and 0.989 for the FTIR methods. FFA in samples of crude soybean oils extracted from damaged beans (0.5 to 2.1% FFA) were measured by FTIR and compared to data obtained by titration of the same samples (correlation coefficient, 0.869). To whom correspondence should be addressed at National Center for Agricultural Utilization Research, Agriculture Research Service, U.S. Department of Agriculture, 1815 North University Street, Peoria, IL 61604. ¹The mention of firm names or trade products does not imply that they are endorsed or recommended by the U.S. Department of Agriculture over other firms or similar products not mentioned.     

INVESTIGATION OF THE USE OF LASER-DOPPLER VELOCIMETRY IN TWO-PHASE BUBBLY FLOWS

Understanding the dynamic phenomena of viability loss of shear sensitive cells and bubble breakage and coalescence within airlift reactors requires knowledge of local, liquid-phase hydrodynamics. The laser-Doppler velocimeter (LDV) is a non-invasive instrument which may be used to obtain this information. Experimental procedures and software were developed to detect and measure Doppler bursts in two-phase flow in a split-cylinder airlift reactor. Off-line analysis of the data indicated a detection rate approximately one order of magnitude greater than that observed using an available commercial frequency tracker. Approximately 400 to 500 observations are needed for the ensemble mean to characterize the local mean velocity to within ±5% for a superficial gas velocity of 10.4 cm/s, the highest superficial gas velocity used in these studies. The limitations, prospects, and signal-processing options for LDV in this application are also discussed     

Correlation of reactivity with chemical structure: Thermal hydrogenation of gas oils

The relationship between chemical structure and reactivity for thermal hydroprocessing was studied for five gas oils derived from Alberta bitumens. Chemical structure was characterized by combining data from ¹ H and ¹³ C nuclear magnetic resonance spectroscopy, class fractionation, and elemental analysis to calculate structural parameters. Thermal hydrotreating was performed in a continuous-flow stirred reactor at 420 and 440°C, 13.9 MPa hydrogen pressure, and 1.5 h¹ LHSV. Conversion of the 343–525°C boiling fraction of the gas oils was correlated with the concentration of naphthenic methylene groups in the feed. Formation of methane and ethane was dependent on the degree of condensation of the aromatic rings in the feed oils. Thermal desulfurization was highly correlated with the amount of saturates in the feed, and the aromaticity of the resin fraction. Hydrogen consumption increased with the aromaticity of the gas oil…     

Development of the meshless finite volume particle method with exact and efficient calculation of interparticle area

The Finite Volume Particle Method (FVPM) is a meshless method based on a definition of interparticle area which is closely analogous to cell face area in the classical finite volume method. In previous work, the interparticle area has been computed by numerical integration, which is a source of error and is extremely expensive. We show that if the particle weight or kernel function is defined as a discontinuous top-hat function, the particle interaction vectors may be evaluated exactly and efficiently. The new formulation reduces overall computational time by a factor between 6.4 and 8.2. In numerical experiments on a viscous flow with an analytical solution, the method converges under all conditions. Significantly, in contrast with standard FVPM and SPH, error depends on particle size but not on particle overlap (as long as the computational domain is completely covered by particles). The new method is shown to be superior to standard FVPM for shock tube flow and inviscid steady transonic flow. In benchmarking on a viscous multiphase flow application, FVPM with exact interparticle area is shown to be competitive with a mesh-based volume-of-fluid solver in terms of computational time required to resolve the structure of an interface.     

软土地基油罐底板变形分析

分析了造成油罐底板变形的原因、形式及其危害，结合工程实例，提出了减少油罐底板不均匀变形的措施。     

A rapid test to measure performance,emission and wear of a diesel engine fueled with palm oil diesel

Results of performance, emission and tribological evaluations of palm oil methyl ester and its blends with conventional diesel in an automobile diesel engine test bed are presented. Polymerization and carbon deposits on the fuel injector were monitored. CO, CO₂, O₂, combustion efficiency and temperature of exhaust gases were also measured. Palm oil methyl ester and its blends have great potential as alternative diesel fuel. Performance and exhaust gas emission for palm oil methyl ester and its blends with conventional diesel are comparable with those of conventional diesel fuel. Palm oil methyl ester does not pose a severe environmental problem and will not deteriorate engine and bearing components.     

硼在玉米中的分布特征及化学形态的研究

对施硼肥和不施硼肥的土壤上种植的玉米中硼的分布及化学形态进行了研究 ,结果表明 ,靠近根部的玉米叶子中含硼最多 ,中部和上部叶子中含硼量依次递减 ,玉米种子中的含硼量低于叶子中的含硼量。通过研究不同溶剂对玉米叶子和种子中硼的浸提能力 ,探明了以 10 %醋酸浸提下来的硼最多 ,其次是用 0 .0 1mol/LEDTA浸提下来的硼 ,用水浸提下来的硼的含量最少。