折流杆换热器CAD系统的开发

本文阐述了折流杆换热器CAD系统的开发方法，包括：把大量线图、数表进行数据程序化，利用ADSRX技术、PDB界面设计技术和参数化图形设计技术对折流杆换热器的一百多种类型、三万多种规格的零部件进行了设计，将数据信息采用数据文件和数据库的方式进行了集成和管理，从而实现折流杆换热器工艺、机械、零部件子系统的集成。     

涵闸工程施工期混凝土温度监测系统与水化热参数反演

针对涵闸工程混凝土温控防裂需要,研制了全自动化数字测温系统。该系统的硬件部分由数字式温度传感器、采集单元、GPRS DTU组成,软件部分包括中心服务器软件和客户端软件。系统实现了GPRS公用无线网络覆盖范围内无人值守、多测点远程测量和数据实时共享,具有体积小、无需布线、运行稳定、精度高等特点。经过实际工程多次应用,系统运行稳定可靠,达到预期性能。基于以上系统的测量数据,结合三维非稳定温度场数值计算,对特定工程的水化热参数进行了反演。规范给出普硅42.5水泥水化热参数为m=0.69,n=0.56;而根据实测数据反演的结果为m=1.85,n=0.79。根据两组参数分别进行了三维温度应力计算,得到完全不同的计算结果,前者温度应力未超标,后者多处超标需要采用温控防裂措施才能保证结构防裂安全。因此对实际工程进行温度监测和水化热参数反演是非常必要的。     

On the robust control of stable minimum phase plants with large uncertainty in a time constant. A fractional-order control approach

This paper addresses the problem of designing controllers that are robust to a great uncertainty in a time constant of the plant. Plants must be represented by minimum phase rational transfer functions of an arbitrary order. The design specifications are: (1) a phase margin for the nominal plant, (2) a gain crossover frequency for the nominal plant, (3) zero steady state error to step commands, and (4) a constant phase margin for all the possible values of the time constant (T$T$): 0<T<∞$0<T<\infty$. We propose a theorem that defines the structure of the set of controllers that fulfil these specifications and show that it is necessary for these robust controllers to include a fractional-order PI$PI$ term. Examples are developed for both stable and unstable plants, and the results are compared with a standard PI$PI$ controller and a robust controller designed using the QFT$QFT$ methodology.     

400kt／a硫酸高效电除雾器的设计参数与运行

介绍 4 0 0 kt/ a硫酸系统电除雾器总体结构及工艺设计参数 ,投入运行后 ,除雾效率低 ,介绍对存在问题的分析及解决过程 ,并介绍 2点成功经验     

UHMWPE/LDPE复合材料拉伸破坏的声发射特性研究(Ⅱ)

本文续“UHMWPE/LDPE复合材料拉伸破坏的声发射特性研究(Ⅰ)”,进一步研究了UHMWPE/LDPE复合材料拉伸破坏的声发射特性,具体研究了[0°]、[90°]在拉伸破坏过程中声发射参数特征,并对拉伸破坏机理进行了初步的研究。     

A novel method for camera external parameters online calibration using dotted road line

On board camera is the most important information source for driver assistant application which is based on computer vision. One problem for on board camera is that the external parameters are easy to be changed when moving on the road. Traditional method either calibrates external parameters offline or calibrates external parameters semi-online, which both need human intervention. By observation, it is found that corner connection of dotted road lane can form two groups of parallel lines. Using this geometric characteristics and through theoretical derivation, a novel online camera external parameter calibration method is proposed which focus on the situation when vehicle is moving. The pro of this method is that it maintains relatively high calculation accuracy and more important, it does not require any human intervention in whole calibration process. Experimental and comparison results show that this method is simple and have accurate results which fully meet the requirements of practical application.     

PARAMETER ESTIMATION IN EXPONENTIAL MODELS

Abstract. In this paper the problems of parameter estimation and order determination of an exponential (EX) model are studied in the time domain. In order to estimate the parameters, the parameter equations of an EX model are given in terms of the autocorrelation function, which is similar to the Yule-Walker equations of an autoregressive moving-average model. Estimates of parameters are obtained with the aid of the parameter equations and theorems are proved relating the convergence rate and asymptotic distribution of the estimates. We present two kinds of methods for estimating the order and prove that the estimates of the order are consistent.     

振动剪切作用下聚合物熔体的非仿射网络结构模型——振动参数对聚合物熔体黏性的影响

利用非仿射网络结构本构模型分析了正弦脉动流场中振动参数对聚合物熔体黏性的影响作用，并从缠结密度的概念上来解释其影响规律。     

A virtual actuator and sensor approach for fault tolerant control of LPV systems

In this paper, a fault tolerant control (FTC) strategy using virtual actuators and sensors for linear parameter varying (LPV) systems is proposed. The main idea of this FTC method, initially developed for LTI systems, is to reconfigure the control loop such that the nominal controller could still be used without need of retuning it. The plant with the faulty actuator/sensor is modified adding the virtual actuator/sensor block that masks the actuator/sensor fault. The suggested technique is an active FTC strategy that reconfigures the virtual actuator/sensor on-line taking into account faults and operating point changes. The stability of the reconfigured control loop is guaranteed if the faulty plant is stabilizable/detectable. The LPV virtual actuator/sensor is designed using polytopic LPV techniques and linear matrix inequalities (LMIs). A two-tank system simulator is used to assess the performance of the proposed method. In particular, it is shown that the application of the proposed technique results in an improvement, in terms of performance, with respect to the LTI counterpart.     

β-甘露聚糖酶理化性质与其最适pH的相关性

为了探究影响GH5家族β-甘露聚糖酶最适pH的各种因素,利用该酶的序列信息,构建了基于氨基酸组成的β-甘露聚糖酶理化性质与其最适pH的相关性模型。结果表明:该酶N端氨基酸序列是影响其最适pH的重要因素,在243个理化性质中有17个呈极显著相关,其中7个呈正相关。优化的转移能量参数相关性最高,为0.78:7个正相关的理化性质中,与螺旋相关的理化性质占3个。优化的转移能量参数和螺旋是影响pH稳定性的最重要的因素。所建立的模型为研究该酶酸碱适应性机理提供了一种简单有效的方法。