Determination of polymer–polymer interaction parameters using inverse gas chromatography

A modified method is discussed that is based on Farooque and Deshpande's method to obtain polymer–polymer interaction parameters using inverse gas chromatography (IGC) data. In the Farooque and Deshpande method, the ratio of the difference of probe–polymer interaction parameters between two polymers and the probe volume [(χ₁₂ ? χ₁₃)/V₁] is used as the abscissa. In the modified method, the ratio [(?₂χ₁₂ + ?₃χ₁₃)/V₁] is used as the abscissa. Experimental data previously reported for a poly(?‐caprolactone)‐polyepichlorohydrin (PCL/PECH) blend and a poly(ethyl acrylate)‐poly(vinyl propionate) (PEA/PVPr) blend are analyzed. It is found that the slopes obtained by the new method had smaller deviations from the theoretical values than the Farooque and Deshpande method. The standard deviations of both slopes and intercepts obtained from the new method are also smaller. Using the new method, the polymer–polymer interaction parameters obtained from the intercept are negative numbers for the PCL/PECH system and very small positive numbers for PEA/PVPr. Explanations are given for the probe and concentration dependency of the polymer–polymer interaction parameters that are generally observed in IGC studies. A new method for selecting the best probe for calculating the interaction parameter is discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 671–680, 2003     

参数设计法在铝电解电容器设计中的应用探讨

论述了参数设计法在铝电解电容器设计开发阶段的应用。文中阐明了铝电解电容器的主要质量特性(损耗因子、电容量)及芯包外径的参数设计原理,并建立了归一化函数作为优选设计方案的判据。实例证明在铝电解电容器的设计过程中应用参数设计法以减小产品质量特性变异是有效的。     

局部散射源参数估计的非线性算子方法

本文利用单次快摄数据的两个非线性算子估计局部散射源中心波达方向和角扩展,与多维参数搜索和其他低复杂性的局部散射源参数估计算法不同,非线性算子方法给出了单次快摄的局部散射源参数估计的闭式解,无需进行多维搜索和子空间分解。     

正交参数与平纹面

本文证明了一族闭曲线C(t),t∈I,称变闭曲线,在光滑性条件下,具有正交参数u,即当C(t)表为(?)=(?)(u,t)时,有(?)·(?)≡0.接着,文中提出了一种“降维法”,即用一族平行平面将空间曲面截成平面变曲线,并讨论其若干整体性质.     

Projection center calibration by motion

Camera calibration is the first step of three-dimensional machine vision. A fundamental parameter to be calibrated is the position of the camera projection center with respect to the image plane. This paper presents a method for the computation of the projection center position using images of a translating rigid object, taken by the camera itself.

Many works have been proposed in literature to solve the calibration problem, but this method has several desirable features. The projection center position is computed directly, independently of all other camera parameters. The dimensions and position of the object used for calibration can be completely unknown.

This method is based on a geometric relation between the projection center and the focus of expansion. The use of this property enables the problem to be split into two parts. First a suitable number of focuses of expansion are computed from the images of the translating object. Then the focuses of expansion are taken as landmarks to build a spatial back triangulation problem, the solution of which gives the projection center position.     

TURBULENCE MEASUREMENT INSTRUMENT WITH A SILICON PIEZORE-SISTANCE BEAM

A newly developed turbulence measurement instrument is introduced in the paper.The transducer of the device is based on the principle of the effect of silicon piezoresistance that isintegrated in a Wheatstone bridge on a pure silicon beam. At one end of the beam, a small lightball is installed as the target forced by the water flow. The other parts are prevented from thewater flow with a sophisticated stainless steel tube. The instrument can be used to measure turbu-lent velocities either in clear Water or in flows bearing hyperconcentration of sediment. It can al-so be used to measure velocities in both glass flume and model experiments as well as in pipe ex-periment by being mounted in a special way.     

A low cost calibration conditioner for dynamic strain gauge measurements

A conditioner for dynamic strain measurements that allows for a series of calibration signals with periodic and predefined time occurrence, during the whole period in which the measurements have to be carried out, is presented in this work. The calibration signals, having suitable size ratios between them, allow one to evaluate the linearity of the entire measurement chain.     

国内外电雷管电引火元件现状及改进思路

文章分析了目前国内外电引火元件的现状，列举了国外著名火炸药公司典型的几种电引火元件结构及电火参数，提出了改进我国电引火元件的技术构思。     

Ba（Mg1／3Ta2／3）O3微波陶瓷的损耗研究

本工作用ＸＲＤ，ＥＰＭＡ，ＳＥＭ等测试技术计算和示出了用不同活性粉料制备的Ｂａ（Ｍｇ１／３Ｔａ２／３）Ｏ３微波陶瓷晶格中Ｂ位离子有序度和元素的面分布情况，对它们在Ｘ面下的电行为作了探讨。实验结果表明，ＢＭＴ陶瓷的微波损耗主要与其密度有序度和微观结构的均一度有关。