改进的GMDH方法及其在参数预报中的应用

本文在综合了ＧＭＤＨ方法中几种有效的改进算法的基础上，进一步研究了变量预选及部分表达式的构成问题，采用最优化方法确定变量最佳组成式并进行变量筛选，由此得到精度更高、稳定性较好的模型，将其应用于聚丙烯熔指数的预报，仿真结果令人满意。     

基于Legendre多项式的随机连续系统的Markov参数估计

本文在讨论连续Ｗｉｓｅｎｒ过程的Ｌｅｇｅｎｄｒｅ多项式逼近值的相关性和Ｗｉｅｎｅｒ过程扰动下连续线性系统基于该正交多项的最小二乘估计有偏性后，提出了无偏一致的且数估计误差方差最小的Ｍａｒｋｏｖ估计（最小方差估计）算法，并给出本文方法的仿真结果。     

Valid parameter range analyses for chemical reaction kinetic models

The present work quantifies the relations between the structure of a chemical reaction kinetic model, its valid parameter range, and the truncation error tolerance of the model. General methods are presented to solve the three important problems of valid parameter range analysis: (1) identification of the valid parameter range of a kinetic model, (2) estimation of the error tolerance required when applying a kinetic model over a specified parameter range, and (3) improvement of existing model generation algorithms to construct more robust models. Finally, the relationship between a model's structure, its valid parameter range, and the truncation error tolerance are illustrated by the flexibility-tolerance-model graph. The new methods are applied to pyrolysis of methane/ethane mixtures.     

Pultruded fibre reinforced polyurethane composites II. Effect of processing parameters on mechanical and thermal properties

This paper presents a novel process for the fabrication of pultruded polyurethane (PU) composites. The effects of the processing parameters on the mechanical properties (flexural strength and flexural modulus, etc.) and thermal properties (HDT) of the fibre reinforced PU composites by pultrusion have been studied. The processing parameters investigated include pulling rate (in-line speed), die temperature, filler type and content, and post-cure time and temperature. Results show that the composites possessed various optimum pulling rates at different die temperatures. On the basis of the DSC diagram, the swelling ratio, the mechanical properties and the thermal properties of composites, the optimum die temperature can be determined. It is found that the mechanical and thermal properties increase with filler content for various types of filler. The mechanical and thermal properties increase at a suitable post-cure temperature and time. Furthermore, the properties which decreased due to the degradation of composite materials for a long post-cure time will be discussed.     

冷弯型钢纵向变形的理论分析及计算

对冷弯型钢的纵向变形过程进行了力学分析，得到了变形微分方程，求得了转动角的理论公式，并对其变形形状进行了分析计算。     

动态矩阵控制系统稳定域的根轨迹分析

本文使用根轨迹技术从理论上分析了纯滞后工业过程参数变化对系统稳定性的影响,得到了一个与设计参数有关的稳定域,从而为设计参数自动整定提供了参考。     

调节对象参数和运动特性随工况变化的分析

水轮机调节对象的许多参数都是随运行工况变化的。以调节对象线性化模型为基础，从1个实例计算人手，计算了不同工况下水轮机传递系数和发电机6个参数的变化情况，进而计算这些参数变化对捌节对象特征根的影响。通过汁算表明，其水力振荡衰减速度与出力有关．而系统的其他运动特性随工况变化较小。     

基于NURBS的PDE曲面构造法研究及应用

由非均匀有理Ｂ样条曲线曲面给定边界条件，用偏微分方程来构造曲面，以参数“ａ”控制其整体形状，本文分析其思路原理及过程，并列举了在ＣＡＤ上的应用，最后分析了优缺点。     

34CrMoV结构钢动态再结晶行为研究

应用Gleeble-1500热模拟实验机进行等温压缩试验,研究了变形工艺参数对34CrMoV结构钢动态再结晶行为的影响.结果表明,其流变应力随变形温度升高而降低,随应变速率提高而增大;随着应变速率的降低,应变量的增加和变形温度的升高,动态再结晶速度加快且奥氏体晶粒得到细化.     

基于模糊匹配的平面连杆机构反求设计研究

对平面连杆机构曲线进行了分析,提出了用一组特征参数来描述连杆曲线,建立了连杆曲线图谱库,并将模糊论应用于连杆机构的曲线匹配,从而获取所求的机构参数.最后给出了应用实例,证实了该方法的可行性与有效性.