梯形断面水力计算的一种新方法

本文从梯形水力最优断面的基本思路出发，通过理论分析找到了梯形断面水力计算的一种新方法——即通过特征参数进行梯形断面的水力计算。     

斜井抽油系统优化设计技术研究及应用

结合斜井井身轨迹特点,建立了斜井三维井眼中杆柱轴向载荷和侧向载荷计算数学模型,给出扶正器间距和加重杆配置的计算方法;应用系统工程分析方法,给出系统参数设计的步骤,形成了斜井有杆泵抽油系统抽汲参数优化设计方法,编制了相应的优化设计软件。现场应用实例表明,该优化设计方法理论正确可靠,根据本方法编制的斜井抽油系统优化设计软件用于现场设计,可达到有效降低管杆偏磨,减小悬点载荷,提高油井产量、泵效和井下系统效率之目的。     

Adaptive boundary control for unstable parabolic PDEs—Part II: Estimation-based designs

The certainty equivalence approach to adaptive control is commonly used with two types of identifiers: passivity-based identifiers and swapping identifiers. The “passive” (also known as “observer-based”) approach is the prevalent identification technique in existing results on adaptive control for PDEs but has so far not been used in boundary control problems. The swapping approach, prevalent in finite-dimensional adaptive control is employed here for the first time in adaptive control of PDEs. For a class of unstable parabolic PDEs we prove a separation principle result for both the passive and swapping identifiers combined with the backstepping boundary controllers. The result is applicable in any dimension. For physical reasons we restrict our attention to dimensions no higher than three. The results of the paper are illustrated by simulations.     

桥梁颤振气动导数识别的迭代法

本文提出一种利用自由振动响应通过年顿－拉夫逊迭代同时识别出桥梁全部8个颤振气动导的方法。此法具有对迭代初值要求不高，识别结果稳定的特点，并具有一定的抗噪声干扰能力。数字仿真与实物试验结果表明本文方法有效，可行。     

改进的第三代相干算法及应用

在讨论相干技术发展及三代相干算法优缺点的基础上，介绍了改进的第三代相干算法。应用自行开发的相干软件对多个油气勘探和开发区块的三维地震资料进行处理、分析，对相干时窗长度、相关道数等参数对算法效果的影响及相干体对断层、异常地质体的识别，以及解释方法进行了探讨。应用实例证明，改进的第三代相干算法抗干扰能力强，横向分辨率高，不仅适用于倾斜地层，而且对断层尤其对小断层、异常地质体具有较高的检测能力，是油气勘探和开发的一项有效和实用的技术。     

水电工程坝基岩体研究现状与发展的思考

以国内部分重点水电工程为例，对我国水电工程建设中坝基岩体质量分类、主要岩石力学参数的选取、大坝建基面的确定及弱风化岩体利用情况进行总结与分析；指出简化的坝基岩体多因子分类、岩体力学参数的提取与岩体质量分类相配套、按等值线提取岩体物理力学参数并动态确定大坝建基面的方法，应是水电工程坝基工程岩体研究的发展趋势。     

基于Luv色度坐标图像分割方法的孔洞参数计算

针对成像测井解释中孔洞参数定量计算的准点，提出用基于Luv色度坐标进行图像分割的方法来定量计算孔洞的面积、面孔率等相关参数。采用该方法得到的孔洞结果目标区域完整，可以方便地计算出孔洞面积和面孔率等参数。     

液氮制冷低气压试验箱的仿真设计

在采用液氮制冷的低气压试验箱的设计中,用常规工程设计方法计算的降温过程冷负荷过大,从而导致真空系统设计容量过大。本文采用分布参数模型对试验箱低气压条件下降温过程的冷负荷进行了精确仿真模拟,以此作为真空系统容量设计的基础,减小了设计规模,取得了良好的效果。     

离心式井下增压装置的系统设计

针对目前国内外超高压射流钻井技术采用柱塞式增压器普遍存在寿命短、工作可靠性差的问题,提出离心式井下增压装置的结构设计方案。这种增压装置由动力单元(涡轮动力机)、固液分离单元、增压单元(离心泵)和流道短节单元组成,通过钻井液驱动涡轮动力机旋转,并带动固液分离装置和离心泵高速旋转,使部分钻井液增压,达到提高射流压力和速度的目的。现场试验证明,这种离心式井下增压装置可使钻井液在井底的压力达到30MPa。     

Determination of polymer–polymer interaction parameters using inverse gas chromatography

A modified method is discussed that is based on Farooque and Deshpande's method to obtain polymer–polymer interaction parameters using inverse gas chromatography (IGC) data. In the Farooque and Deshpande method, the ratio of the difference of probe–polymer interaction parameters between two polymers and the probe volume [(χ₁₂ ? χ₁₃)/V₁] is used as the abscissa. In the modified method, the ratio [(?₂χ₁₂ + ?₃χ₁₃)/V₁] is used as the abscissa. Experimental data previously reported for a poly(?‐caprolactone)‐polyepichlorohydrin (PCL/PECH) blend and a poly(ethyl acrylate)‐poly(vinyl propionate) (PEA/PVPr) blend are analyzed. It is found that the slopes obtained by the new method had smaller deviations from the theoretical values than the Farooque and Deshpande method. The standard deviations of both slopes and intercepts obtained from the new method are also smaller. Using the new method, the polymer–polymer interaction parameters obtained from the intercept are negative numbers for the PCL/PECH system and very small positive numbers for PEA/PVPr. Explanations are given for the probe and concentration dependency of the polymer–polymer interaction parameters that are generally observed in IGC studies. A new method for selecting the best probe for calculating the interaction parameter is discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 671–680, 2003