采用改进型IHS变换的遥感图像融合算法

在分析亮度一色度-饱和度(IHS)变换影像融合方法的基础上,针对IHS变换存在光谱特征扭曲的局限性,提出了一种采用分辨率退化模型的基于IHS变换的局部回归分析融合方法.采用SPOT的全色影像和TM的多光谱影像为实验数据,经多个统计参数的定量分析以及Matlab仿真实验的验证表明,该方法在空间分辨率和光谱分辨率上都达到了较好的效果.     

一种基于局部属性集的规则确定度

在传统的粗糙集中,利用确定度来评测决策规则的确定性,然而当多个决策规则拥有相同的确定度时,对给定的对象进行分类变得困难。基于局部属性集对决策规则确定性的影响,提出一种新的规则确定度,能充分反映决策规则的确定性在局部属性集上的差异。实例表明新的确定度对决策规则有较好的评测。     

Collaborative writing in multiple discourse contexts

Research in computer-supported writing has traditionally compared electronic communication with oral, face-to-face communication to identify the benefits and weaknesses of each, as if they entailed dichotomous choices. In this article, we challenge that view and argue instead that any form of communication and its educational usefulness is shaped by the situation in which it is used, the backgrounds and goals of the participants, the institutional and technological setup, and the intended purpose of the medium. Three modes of communication in one graduate course are examined — oral discussion, synchronous written discussion on a local area network, and asynchronous written postings on an email list set up for the class. It was found that patterns of participation, topic introduction, and topic development differed across the three communication modes, but that the three were interwoven with each other and embedded within the larger classroom context and forms of knowledge creation in the class. Thus, rather than examining different communication media separately, researchers interested in understanding computer-supported collaborative writing need to look at how different media are used to create a meta-medium, which is established by the discourse community involved.     

335 GHz非平衡式肖特基二极管三倍频器

基于混合集成的方式,采用对称锥形渐变线匹配结构设计了335 GHz非平衡式三倍频器。在保证单模传输的条件下,该匹配结构不仅能够固定二极管位置,而且可以增大匹配效果,解决了高频段倍频器3 dB带宽较窄的问题。实测结果表明,该倍频器在330~356 GHz频率范围内输出功率均大于5 mW。驱动功率为220 mW时,有最高输出功率11.2 mW,由它作为核心器件组成的固态太赫兹本振源,能够驱动超外差接收机中670 GHz二次谐波混频器。     

基于共享近邻和优化关联策略的边界剥离聚类

边界剥离聚类算法(BP)是一种基于密度的聚类算法,它通过逐渐剥离边界点来揭示聚类的潜在核心,已经被证明是一种十分有效的聚类手段.然而, BP算法仍存在一些不足之处:一方面,数据点的局部密度仅考虑了距离特征,使得边界点的确定不够合理;另一方面, BP算法中的关联策略容易误判异常值,并且在分配边界点时容易产生连带错误.为此,本文提出了一种基于共享近邻和优化关联策略的边界剥离聚类算法(SOBP).该算法使用了基于共享近邻的局部密度函数来更好地探索数据点之间的相似性,同时优化了BP算法中的关联策略,使得每次迭代中边界点不再仅与一个非边界点进行关联,并进一步采用了边界点与非边界点、已剥离边界点之间的双重关联准则.在一些数据集上的测试表明,相较于其他6种经典算法,该算法在评估指标上表现更佳.     

局域能源市场多产消者P2P交易框架设计

随着局域能源市场中分布式能源的大量接入和电力系统运行方式的逐渐转变,具有电能生产/消费行为的产消者得到了广泛关注与研究。在此背景下,为提高小规模能源在局域能源市场中的就地消纳能力,设计了一种面向局域能源市场中多产消者的点对点(P2P)日前市场交易框架。在局域能源市场建立了P2P市场交易平台,并对产消者的基本特征进行了归纳分析,提出了典型的产消者组合类型;在产消者层面,采用供给函数均衡模型对产消者竞价行为进行建模,确立了含多产消者的P2P交易平台参与局域能源市场交易;采用连续双边拍卖机制对产消者之间进行P2P匹配,并确定交易过程中的拍卖价格和交易价格。最后,通过算例验证了所提P2P交易框架的有效性。     

用于超外差接收机提供本振源的高功率510 GHz单片集成三倍频器

本文介绍了一种基于砷化镓材料的高功率490~530 GHz单片集成三倍频器。基于提出的对称平衡结构,该三倍频器不仅可以实现良好的振幅和相位平衡,用来实现高效的功率合成,还可以在没有任何旁路电容的情况下提供直流偏置路径以保证高效倍频效率。同时,开展容差性仿真分析二极管关键电气参数与结构参数对倍频性能的影响研究,以便最大化提升倍频性能。最终,在大约80~200 mW的输入功率驱动下,研制的510 GHz三倍频,在490~530 GHz频率范围内,输出功率为4~16 mW,其中峰值倍频效率11%。在522 GHz频点处,该三倍频在218 mW的输入功率驱动下,产生16 mW的最大输出功率。该三倍频器后期将用于1 THz的固态外超外差混频器的本振源。     

关键词最优路径查询的分段拓展算法

关键词最优路径查询（KOR）查找在满足关键词全覆盖和路径长度约束条件下,时间开销最小的路线常用于旅行规划。现有优化算法虽然采用各种剪枝策略缩小搜索规模,但是本质上是广度优先搜索,在查找长路径时,搜索规模依然过大,执行时间长。针对该问题,提出一种关键词最优路径查询的分段拓展算法（SE-KOR）。SE-KOR算法根据关键词倒排索引表构建关键词顶点路径,将路径划分为多段分别拓展,降低搜索规模,从而缩短执行时间。该算法在路径拓展时给出路径走向,而现有剪枝策略不控制路径拓展方向,因此提出局部代价阈值剪枝,控制路径的走向沿关键词顶点路径拓展,并综合运用近似支配、可行解目标值剪枝和全局优先拓展策略加速拓展。实验结果表明,在不损失精度的情况下,该算法执行时间分别在不同关键词个数、代价阈值与查询图规模下至少缩短8.0%、61.0%和57.7%。     

On mesh restrictions to satisfy comparison principles,maximum principles,and the non-negative constraint: Recent developments and new results

This article concerns mesh restrictions that are needed to satisfy several important mathematical properties—maximum principles, comparison principles, and the nonnegative constraint—for a general linear second-order elliptic partial differential equation. We critically review some recent developments in the field of discrete maximum principles, derive new results, and discuss some possible future research directions in this area. In particular, we derive restrictions for a three-node triangular (T3) element and a four-node quadrilateral (Q4) element to satisfy comparison principles, maximum principles, and the nonnegative constraint under the standard single-field Galerkin formulation. Analysis is restricted to uniformly elliptic linear differential operators in divergence form with Dirichlet boundary conditions specified on the entire boundary of the domain. Various versions of maximum principles and comparison principles are discussed in both continuous and discrete settings. In the literature, it is well-known that an acute-angled triangle is sufficient to satisfy the discrete weak maximum principle for pure isotropic diffusion. Herein, we show that this condition can be either too restrictive or not sufficient to satisfy various discrete principles when one considers anisotropic diffusivity, advection velocity field, or linear reaction coefficient. Subsequently, we derive appropriate restrictions on the mesh for simplicial (e.g., T3 element) and nonsimplicial (e.g., Q4 element) elements. Based on these conditions, an iterative algorithm is developed to construct simplicial meshes that preserve discrete maximum principles using existing open source mesh generators. Various numerical examples based on different types of triangulations are presented to show the pros and cons of placing restrictions on a computational mesh. We also quantify local and global mass conservation errors using representative numerical examples and illustrate the performance of metric.     

Targeted Nanoparticle Thermometry: A Method to Measure Local Temperature at the Nanoscale Point Where Water Vapor Nucleation Occurs

An optical nanothermometer technique based on laser trapping, moving and targeted attaching an erbium oxide nanoparticle cluster is developed to measure the local temperature. The authors apply this new nanoscale temperature measuring technique (limited by the size of the nanoparticles) to measure the temperature of vapor nucleation in water. Vapor nucleation is observed after superheating water above the boiling point for degassed and nondegassed water. The average nucleation temperature for water without gas is 560 K but this temperature is lowered by 100 K when gas is introduced into the water. The authors are able to measure the temperature inside the bubble during bubble formation and find that the temperature inside the bubble spikes to over 1000 K because the heat source (optically‐heated nanorods) is no longer connected to liquid water and heat dissipation is greatly reduced.