钢丝绳牵引胶带输送机动力制动系统改造

介绍了钢丝绳牵引胶带输送机制动系统改造方案前、后的对比。     

圆形超细金属／合金丝研究进展及其在Z箍缩研究中的应用

介绍了圆形超细金属／合金丝制备技术基本原理、技术特点及基本性能，主要包括拉拔技术、电解腐蚀技术及熔融快速凝固技术。回顾了超细W、Mo、Al丝等在Z箍缩丝阵负载材料中的应用。     

安钢高线粗中轧机导卫设计特点

介绍了安钢自行设计的高线粗中轧机导卫装置的设计原则和特点。     

Si相的析出状态对Al—Si合金性能的影响

控制Si相的析出状态,会对Al-Si(1wt％)合金的性能产生不同的影响。本文阐述通过不同的热处理工艺改变了Al-Si(1wt％)合金的机械、物理性能,获得了高形变强化率、高塑性变形能力、高拉伸强度的工艺,还讨论了具有上述高拉伸强度的微细丝在半导体器件应用中所具有的优越性。     

连续式棒线材轧机孔型系统的选择

论述了连续式棒线材轧机孔型系统的种类和特点，介绍了粗轧机组和中轧机组孔型系统的选择原则和方法。     

导线物证的扫描电镜及能谱鉴定方法

对导线物证同一性的鉴定，可先用X射线能谱仪快速确定物证为同一物的必要条件，再用扫描电镜对物证的特征条纹或金相组织进行最后判定。该方法简便，可靠。     

A Study of Surface Deformation during Wire‐Rod Rolling of High Speed Steels using Experimental and Computational Techniques

The evolution of surface defects during shape rolling of high‐speed steel billets is studied using longitudinal surface defects prepared by machining and welding. The reduction of the defects during rolling in a production mill is compared to the total area reduction of the billets. Samples are collected after pass 4, 6, 8, 14, 19 and the final pass, 28, representing the finished 5.5mm wire. By inspecting the cross sections, the rotation of the billets from pass to pass is evaluated. Results from FE simulations on solid billets are compared to the experimental results. Generally, simulations predict less reduction than observed experimentally. In most cases cracks reduce most effectively followed by carbon steel welds and stainless steel welds.     

斜井提升钢丝绳磨损“失效树”分析

介绍了引起斜井提升钢丝绳失效的各种因素 ,并建立“失效树” ,为煤矿生产中判断其失效原因及预防提供可靠依据。     

分布式供电和冷热电联产的前景

文中通过分布式供电特点及其发展趋势的阐述,强调了该供电特点是集中供电的重要补充,并且指出可再生能源将为分布式供电提供更为广阔的发展前景。同时,还认为分布式供电技术的主要发展方向为“冷热电三联产”技术。     

A simplified cascade current‐source inverter interconnected to a single‐phase three‐wire distribution system and its application to electric energy storage systems with batteries

A novel current source inverter system interconnected to the single‐phase grid is proposed. It has the same construction as the conventional three‐phase current source inverter that is interconnected to the single‐phase three‐wire distribution system. Though the proposed circuit has no output transformer, it can be equivalently performed as the single‐phase double cascade inverter by diverting the pole transformer in the utility system. By controlling the appropriate scheme, the output currents can be obtained as the five‐level waveforms and their distortions can be decreased sufficiently. It is applied to the interactive electric energy storage system with batteries and the basic discharging characteristics are discussed experimentally. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(2): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10380