Design of a 2-DOF-PID controller using an improved sine–cosine algorithm for load frequency control of a three-area system with nonlinearities

This paper proposes an improved sine–cosine algorithm (ISCA) based 2-DOF-PID controller for load frequency control. A three-area test system is built for study, while some physical constraints (nonlinearities) are considered for the investigation of a realistic power system. The proposed method is used as the parameter optimizer of the LFC controller in different scenarios. The 2-DOF-PID controllers are used because of their capability of fast disturbance rejection without significant increase of overshoot in set-point tracking. The 2-DOF-PID controllers’ efficacy is observed by examining the responses with the outcomes obtained with PID and FOPID controllers. The simulation results with the suggested scheme are correlated with some of the existing algorithms, such as SCA, SSA, ALO, and PSO in three different scenarios, i.e., a disturbance in two areas, in three areas, and in the presence of physical constraints. In addition, the study is extended to a four-area power system. Statistical analysis is performed using the Wilcoxon Sign Rank Test (WSRT) on 20 independent runs. This confirms the supremacy of the proposed method.     

电力有源滤波器控制器的研究与仿真分析

建立了包括有源电力滤波器（ＡＰＦ）在内的公共连接点（ＰＣＣ）的数学模型;针对实际控制器计算过程中的时间延迟,提出对负载电流值进行预测的两种算法,对逆变器的开关元件提出一种新型脉宽调制（ＰＷＭ）控制方案,并采用电力电子仿真软件包进行了仿真验证。     

浅析40T支架搬运车液压系统油温变化对其效率的影响

介绍了油温变化对40T支架搬运车液压系统油液黏度、液压介质和橡胶类密封件的影响,分析了液压系统的总发热功率、总散热功率,结合动态热平衡的计算,找出了液压系统总效率与油温变化之间的关系,并给出其函数关系式。根据这种关系,通过一种工况的油温实测数据取样,计算出相应的效率值,定量地验证了液压系统油温变化引起效率变化的关系,得出了总效率随着温度变化而变化的结论,即温差增大时,总效率降低;温差减小时,总效率增大。通过该结论可以全面掌握系统的工作状态,通过降低油温有效提高效率。     

High power devices in wide bandgap semiconductors

Silicon carbide (SiC) semiconductor devices for high power applications are now commercially available as discrete devices. Recently Schottky diodes are offered by both USA and Europe based companies. Active switching devices such as bipolar junction transistors (BJTs), field effect transistors (JFETs and MOSFETs) are now reaching the market. The interest is rapidly growing for these devices in high power and high temperature applications. The main advantages of wide bandgap semiconductors are their very hi...     

A comparative study of two techniques for improving power‐handling capability of CMOS T/R switches

This article proposes an asymmetric topology for transmit/receive (T/R) switches and more importantly presents a comparative study of both LC‐tuned and resistive body‐floating techniques for improving the power‐handling capability of the T/R switches in the same 0.18‐μm triple‐well CMOS. It is shown from simulations and measurements that the switches adopting either technique achieve comparable performances. For instance, the switch employing the LC‐tuned body‐floating technique exhibits insertion loss of 1.5 dB, isolation of 23.5 dB, and power‐handling capability of 22.5 dBm at 5.2 GHz, whereas the switch using the resistive body‐floating technique exhibits insertion loss of 1.3 dB, isolation of 24 dB, and power‐handling capability of 22.2 dBm, respectively. Therefore, one can conclude that the asymmetric topology with the resistive body‐floating technique is more suitable for designing T/R switches for wireless local area network applications as it consumes smaller silicon area. © 2010 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2010.     

HALT技术在变频器中的应用初探

HALT技术可在产品设计阶段快速消除设计缺陷,缩短研发时间和成本,迅速提高产品的质量和固有可靠性。本文从HALT试验的背景出发,介绍了HALT试验的基本原理和意义。在对HALT箱各方面性能验证的基础上,针对我司11kW变频器,详细讲述了HALT试验的具体操作过程。     

A Faà di Bruno Hopf algebra for a group of Fliess operators with applications to feedback

A Faà di Bruno type Hopf algebra is developed for a group of integral operators known as Fliess operators, where operator composition is the group product. Such operators are normally written in terms of generating series over a noncommutative alphabet. Using a general series expansion for the antipode, an explicit formula for the generating series of the compositional inverse operator is derived. The result is applied to analytic nonlinear feedback systems to produce an explicit formula for the feedback product, that is, the generating series for the Fliess operator representation of the closed-loop system written in terms of the generating series of the Fliess operator component systems. This formula is employed to provide a proof that local convergence is preserved under feedback.     

电网智能综合补偿系统的设计

电网智能综合补偿系统可根据电网的动态变化情况,对电网的电压、功能率因数、谐波及三相不平均等因素实现综合补偿,文中详细介绍了这一基于８０Ｃ１９６的智能控制系统的基本结构和软硬件设计思想,实验结果表明了该系统的可行性和智能控制方法的有效性。     

智能电源系统在信号领域中的应用

随着轨道交通的发展,信号设备要求具备智能化、模块化、自动化、网络化的智能电源系统。针对信号系统的发展对智能电源系统的要求,阐述了智能电源系统在智能化、模块化、自动化三方面的应用。介绍了目前智能电源系统所采用各种不同的技术方案,并论述了方案的优缺点,总结了目前存在的问题和发展方向。     

卧式搅拌釜搅拌功率的设计计算

在对一卧式搅拌釜搅拌功率的设计计算中，比较了各种功率计算方法，并与实测值进行对照。