植入式集成磁耦合谐振无线电能传输分析

将植入式应用时无线电能传输的接收线圈与整流电路及其他功能电路集成在单芯片上,不仅可以满足植入式应用更小空间的要求,而且可以进一步提高可靠性和安全性。该文基于此应用,对磁耦合谐振无线电能传输系统建立了完整和简化的电路理论模型,分析结果显示,磁耦合谐振方式比传统的电感耦合方式具有更高的传输效率。     

提高中大口径杀爆弹威力的技术途径

为研究提高中大口径杀爆弹威力的技术途径,分析了国内外弹药战斗部技术发展现状,通过几种炸药(及装药方式)与弹体材料及其性能匹配研究,杀伤威力的理论计算,结合某产品进行杀伤威力数值模拟和试验研究,提出提高中大口径杀爆弹威力的技术途径与建议。     

计及输入变量强相关性的概率潮流计算模型

利用统计学的方法,以风电场出力为例,对其大量历史数据进行相关性分析,将具有强相关性的随机变量用最小二乘进行线性拟合,并用其中一个变量的线性表达式表示,从而消去随机变量之间的强相关性,并认为余下的呈弱相关或不相关的随机变量之间相互独立,以便采用半不变量法计算概率潮流。     

《德国大学的自我主张》与中国大学发展的思考

伴随工业经济社会向知识经济社会的转型,国家的发展越来越依赖于大学的支撑,而现代大学只有在服务于国家、服务于社会的发展中寻求自我的位置与价值才能得到现实的发展。海德格尔在《德国大学的自我主张》中指出,大学在现实生活中得以确认的条件是＂追求大学本质的原初和共同意志＂,它要求大学在追求科学的同时,需要肩负起服务国家的责任。重温海德格尔的《德国大学的自我主张》,将启示我们驻足并理性地把握当今大学所应传授的知识、教师的教学与研究、大学生培养中的人格塑造以及专业的责任,从而更好地发挥大学的作用,实现大学持久地精进。     

大坝渗流监测系统中电源智能控制子系统的设计与实现

文登市米山水库大坝自动化监测系统由于现场设备一直处于24 h供电状态,使得现场设备故障频发。为了解决这一问题,采用了电源智能控制系统,通过485总线与上位机进行通讯,由上位机对电源系统进行控制,实现了对现场设备的定时、按需、智能供电。经过半年多的使用,取得了良好的效果。     

42CrMo钢液相等离子碳氮共渗工艺研究

本文以乙醇胺、氯化钾、氯化铵的水溶液为电解液,用液相等离子电解技术对42CrMo钢进行碳氮共渗工艺进行研究。通过金相显微镜、扫描电镜（SEM）、电子能谱（EDS）、对处理试样表面形貌和渗层进行观察和分析,并对渗层硬度通过显微硬度计进行测试。结果表明：利用液相等离子电解技术可以实现42CrMo钢的碳氮共渗,渗层厚度可以达到60μm,渗层硬度可以达到537 HV,基本达到基体硬度的2倍。     

Research of 6-DOF Serial-Parallel Mechanism Platform for Stability Training of Legged-Walking Robot

The concept of legged-robot stability training with a training platform is proposed and a serial-parallel mechanism platform with 6 degrees of freedom is designed for this target. The designed platform is composed of 4-DOF parallel mechanism with spherical joints and prismatic pairs, and 2-DOF serial mechanism with prismatic pairs. With this design, the platform has advantages of low platform countertop, big workspace, high carrying capacity and high stiffness. On the basis of DOF analysis and computation of space mechanism, weight supporting auxiliary mechanism and raceways-balls supporting mechanism are designed, so as to improve the stiffness of designed large platform and payload capacity of servo motors. And then the whole structure design work of the platform is done. Meanwhile, this paper derives the analytical solutions of forward kinematics, inverse kinematics and inverse dynamics. The error analysis model of position and orientation is established. And then the simulation is done in ADAMS to ensure the correctness and feasibility of this design.     

Control strategy for energy recovery system in hybrid forklift

After analyzing the working condition of the conventional diesel forklift, an energy recovery system in hybrid forklift is considered and its simulation model is built. Then, the control strategy for the proposed energy recovery system is discussed, which is validated and evaluated by simulation. The simulation results show that the proposed control strategy can achieve balance of the power and keep the state of charge （SOC） of ultra capacitor in a reasonable range, and the fuel consumption can be reduced by about 20.8% compared with the conventional diesel forklift. Finally, the feasibility of the simulation results is experimentally verified based on the lifting energy recovery system.     

Influence of lateral initial pressure on axisymmetric wave propagation in hollow cylinder based on first powerhypo-elastic model简

Influence of identical applied initial pressures on the radial surfaces of a hollow cylinder which is compose of materials with first power hypo-elastic constitutive model was investigated.The basic equations of the problem were built up based on the framework of piecewise homogeneous body model with the use of three-dimensional linearized theory of elastic waves in initially stressed bodies（TLTEWISB）.With the method proposed previously,this problem was then solved numerically.Moreover,the dispersion group velocity of the lowest order mode with different initial pressures was also studied.It can be concluded that the initial pressure and the geometry parameters will induce considerable changes of different degrees in dispersive relation between phase velocity and wave number in opposite trend（positive in initial pressure and negative in thickness）.     

An optimal method for prediction and adjustment on gasholder level and self-provided power plant gas supply in steel works

An optimal method for prediction and adjustment on byproduct gasholder level and self-provided power plant gas supply was proposed.This work raises the HP-ENN-LSSVM model based on the Hodrick-Prescott filter,Elman neural network and least squares support vector machines.Then,according to the prediction,the optimal adjustment process came up by a novel reasoning method to sustain the gasholder within safety zone and the self-provided power plant boilers in economic operation,and prevent unfavorable byproduct gas emission and equipment trip as well.The experiments using the practical production data show that the proposed method achieves high accurate predictions and the optimal byproduct gas distribution,which provides a remarkable guidance for reasonable scheduling of byproduct gas.