通信交流供电方案初探

在通信供电系统中,与直流供电系统相比,从设计、设备技术,到运行维护管理,交流供电系统都有所滞后。借鉴直流供电系统经验,通过应用N X并联逆变器模块热插拔技术,实行分散式供电,进而改变传统的以UPS为核心的集中供电模式,则可在很大程度上解决一直困扰着我们的交流供电系统成本高和可靠性低的难题。     

双层有机电致发光器件有机层厚度优化的数值研究

在陷阱电荷限制电流传导理论的基础上,提出了双层有机电致发光器件的数值模型,研究了结构为"阳极/空穴输运层(HTL)/发光层(EML)/阴极"的器件中电流密度和量子效率随有机层的特征陷阱能量、陷阱密度和载流子迁移率的依赖关系. 研究发现,对于给定的HTL和EML的特征陷阱能量、陷阱密度和载流子迁移率,存在一个最优的HTL和EML之间的厚度比率,在此最优厚度比下,器件的电流密度和量子效率达到最大.通过有机层厚度的优化,器件的电流密度和量子效率可提高多达两个数量级.另外,还研究了最优厚度比随有机层特征陷阱能量、总陷阱密度和载流子迁移率之间的定量关系.     

聚合物熔体的非等温平板收缩流动的数值模拟

用有限元法模拟了Carreau流体在4：1平板收缩口模中的非等温挤出流动，采用3节点的三角形单元对速度、压力和温度进行等阶插值，运用特殊的罚函数处理流体的不可压缩条件，解决了压力场的数值振荡问题，并用改进的Newton迭代法对非线性方程进行求解，成功地计算了Carreau流体在平板收缩流动中的速度、压力、粘度以及应力的分布，同时得到温度场的分布，计算的应力分布与实验的结果及Renardy的分析结构相符。     

非稳定井流模型的半解析解

为了提高非稳定渗流计算的计算精度 ,通过数学分析得到了水位传导系数随时间变化时 ,一类非稳定渗流井流模型的半解析解 ,并进行了计算比较     

A Bluetooth Based Sensor Network for Civil Infrastructure Health Monitoring

Communicating with sensors has long been limited either to wired connections or to proprietary wireless communication protocols. Using a ubiquitous and inexpensive wireless communication technology to create Sensor Area Networks (SANs) will accelerate the extensive deployment of sensor technology. Bluetooth, an emerging, worldwide standard for inexpensive, local wireless communication is a viable choice for SANs because of its inherent support for some of the important requirements – low power, small form factor, low cost and sufficient communication range. In this paper we outline an approach, centered on the Bluetooth technology, to support a sensor network composed of fixed wireless sensors for health monitoring of highways, bridges and other civil infrastructures. We present a topology formation scheme that not only takes into account the traffic generated by different sensors but also the associated link strengths, buffer capacities and energy availability. The algorithm makes no particular assumptions as to the placement of nodes, and not all nodes need to be in radio proximity of each other. The output is a tree shaped scatternet rooted at the sensor hub (data logger) that is balanced in terms of traffic carried on each of the links. We also analyze the scheduling, routing and healing aspects of the resulting sensor-net topology.     

宝珠寺重力坝安全监测设计及优化研究

大坝安全监测设计指导和控制着安全监测工作的进行，安全监测的效果和作用与监测设计质量有很大关系。通过对宝珠寺大级安全监测设计结果的研究，提出变形监测采用分段连续引张线法；渗流监测方面，测压管管径应小于50mm，且应根据不同测点量程，选用不同规格的仪器，以保证精度；应力监测有必要结合地质情况对监测设计进行优化；还应选择可能存在安全隐患和异常部位的测点进行自动化跟踪监测。     

信息处理过程中的分类技术

文章主要叙述了信息处理过程中的分类技术，该技术在石油化工生产过程的优化控制中，为信息的正确识别和处理起了相当关键的作用。     

一种CMOS静态双沿顺序脉冲发生器的设计

提出一种基于CMOS技术的静态双沿顺序脉冲发生器结构。他是由以基于CMOS二选一选择器的电平型触发器构成的记忆单元和一个与门阵列组成的转译单元构成的。与门阵列的转译单元使顺序脉冲发生器在时钟上升沿和下降沿处均能输出移位脉冲,从而形成双沿触发的功能。仿真验证其功能正确,且根据分析该结构不仅能够节省芯片面积,还可以大大减小芯片的功耗。     

Improving the Calibration of Vacuum Gas Flow – Control Leak Gauges

A new and original method of calibrating helium leaks that makes it possible to take into account the existence of a number of auxiliary phenomena is described. For this purpose, a hollow leak the purpose of which is to reproduce only desorbed gas flows, is introduced into the vacuum system of the calibration bench. Analysis of the results of corresponding cumulation measurements makes it possible to introduce corrections for these phenomena.