小型水电站联网改造应注意的几个问题

针对铜鼓县小水电站联网时存在的问题及其不利影响进行了分析，井提出了改进途径，指出小水电站的联网改造应立足安全，争取效益。     

Experimental and numerical investigation of fracture in double-edge notched steel plates

Double-edge notched (DENT) steel plates were pulled until complete fracture and several experimental observations were made (using profilometry and scanning electron microscopy). The essential work of fracture (EWF) model was found to be well verified. Numerical simulations—up to the maximum load only—of some experiments were performed using the finite element method (FEM), and incorporating geometric and material non-linearities (large deformation elasto-plasticity). Some experimental measurements were compared with the corresponding numerical computations and excellent agreement was found.     

实验应变／应力模态分析若干问题的进展评述

本文评述了实验应变／应力模态分析进展的若干基本问题。主要是：应变响应与位移响应的关系；应变频响函数矩阵的特点及其测量方法；应变模态的加权正交性及其识别方法；以及其他问题。     

正交双频光栅CCD系统剪切干涉测量二维温度场

以半导体激光器为光源，利用正交双频光栅（ＯＤＦＧ）ＣＣＤ系统剪切干涉对带平板边界的半圆柱体热源的二维温度场进行实时诊断，分析剪切干涉图时，用柱函数系作为拟合基底，给出二维自然对流温度场的定量分布。     

硼／铝复合材料管构件的界面特性EI

主要研究带钛合金连接头硼／铝复合材料管构件中Ｂ－Ａｌ－Ｔｉ间的界面结构与性质。研究表明，在复合工艺条件下，硼－铝界面附近没有检测到任何铝－硼化合物，而钛－铝间形成ＴｉＡｌ有序金属间化合物相。实验证明，硼／铝复合材料与铝合金端环之间采用的固结方法是有效的，且可按照受载类型随意调整斜面搭接长度，达到承受不同载荷的目的。     

实现CDMA最佳多用户检测的神经网络方法

提出并讨论了两种实现码分多址系统中最佳多用户检测的神经网络方法。一种基于离散Ｈｏｐｆｉｅｌｄ神经网络，另一种基于采用反向传播算法的多层感知器神经网络。理论分析和计算机模拟都证实了这两种神经网络方法的可行性，优越性和实用性。前者适用“固定”用户情况；后者既可用于“固定”用户吼适用于移动用户的情况，因而在未来的ＣＤＭＡ个人通信网中有较好的应用前景。     

Analysis of brushless three-phase synchronous generator without exciter

Recently, a demand for small-capacity generators has been increasing as electric sources in small ships and automobiles or as portable electric sources driven by engines. It is desired that the structure of small-capacity generators be simple and robust, and that the generators be highly reliable, easily maintained and controlled. This paper describes an analysis of the original brushless synchronous generator without exciter. The output voltage can be adjusted in the wide range by controlling the stator dc current. To analyze the characteristics of this generator, the finite element method is applied. It is found that the results of theoretical analysis agree well with the experimental results.     

微波宽频带功率负载的研究

介绍了５００Ｗ宽频带功率负载的设计及实验结果，并将研究成果扩展到１０～１０００Ｗ范围。负载主要技术指标：输入阻抗５０Ω，频带宽度０～１０００ＭＨｚ，电压驻波比≤１．１．表面最高温升△ｔ≤１００℃。     

噪声测量作为筛选光电耦合器件的一种方法

本文针对目前用于光电耦合器件筛选方法的不足，提出了用测量耦合器件噪声功率谱的方法来筛选掉噪声值大的器件，给出一批光电耦合器件的测量统计结果及在不同工作点时的噪声功率谱，并给出相应的筛选标准，实验结果表明，这种方法是有效、可行的。     

AHMED experiments on hygroscopic and inert aerosol behaviour in LWR containment conditions: experimental results

Hygroscopic NaOH, CsI, CsOH and inert Ag aerosol behaviour at different temperatures and relative humidities (RH) has been studied in a well instrumented and controlled vessel of 1.81 m³ total free volume. Homogeneous thermal-hydraulic conditions for aerosol measurement in the vessel were achieved. The aerosol number and mass concentration were measured continuously during the experiments using a Condensation Nucleus Counter and a Tapered Element Oscillating Microbalance. The particle size distribution and chemical composition in the test conditions were measured by Berner low pressure impactors. In the case of NaOH the half life of the aerosol mass concentration was more than four times longer at low RH (22%) as compared to high RH (96%). The half lives of the CsOH and CsI aerosols were only twice as long at low RH as compared to high RH. Thus at high RH (96–97%) the half lives of CsOH and CsI were twice as long as the half life for the NaOH aerosol. The faster decay of the NaOH aerosol is due to the smaller density decrease of NaOH during water condensation. CsOH particles grew rapidly to their equilibrium size at all humidities. The measured equilibrium size for CsOH aerosol agree well with the calculated particle size at different RHs. Experimental results were also compared with calculations obtained by severe accident computer codes. These calculated results will be presented in a later paper.