基于KPCA-PSO-SVM的径流预测研究

为提高径流预测模型的准确性与稳定性,对KPCA-PSO-SVM的径流预测方法进行了研究。在分析径流影响因素的基础上,利用核主成分分析(KPCA)法对径流影响因子进行非线性特征提取,获得主成分作为支持向量机(SVM)的输入变量,建立了径流预测SVM模型,其中模型参数通过粒子群算法(PSO)进行优化。模型建立后,以新疆伊犁河雅马渡站中长期径流预测为例进行分析。预测分析结果表明,在拟合和检验阶段模型的平均相对误差分别为0.77%和7.64%,与其他预测模型比较,基于KPCA-PSO-SVM方法建立的径流预测模型有较好的预测和泛化能力,是一种行之有效的中长期径流预测方法。     

关于水泥窑低温余热发电有关问题的思考

根据多年从事水泥纯低温余热发电的实践经验,分析了单压系统、双压系统和闪蒸系统各自的优缺点;提出了统一考虑烧成系统和余热发电系统进行大系统优化的观点,着重就吨熟料烧成煤耗与发电量之间的最佳平衡点进行了分析;同时对如何进一步优化烧成系统和余热发电系统的设计提出了一些具体的建议。     

Multilevel microwave design optimization with automated model fidelity adjustment

A computationally efficient algorithm for electromagnetic (EM)‐simulation‐driven design optimization of microwave structures is proposed. Our technique exploits variable‐fidelity EM simulations and the multilevel design approach where an approximate optimum of the lower accuracy but faster EM model of the structure under design is used as a starting point for optimizing a more accurate model. Several enhancements of the basic multifidelity method are introduced, including an efficient algorithm of optimizing EM models that is based on local response surface approximations, as well as automated adjustment of model fidelity. Convergence of the procedure to the optimum design is ensured by defaulting to the higher fidelity model whenever the prediction given by the lower fidelity fails to improve the design. Distribution of the computational effort between the models of different fidelity allows for making larger steps in the design space at a low cost, as well as substantial reduction of the number of high‐fidelity model evaluations, because the high‐fidelity model is only referred to in the last design stage. The article provides comprehensive numerical verification of our technique. Substantial computational savings are demonstrated in comparison to the benchmark methods: over 40% on average as compared to a basic version of the multifidelity optimization approach and over 95% as compared to direct optimization of the high‐fidelity model. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:281–288, 2014.     

Limits of compensation in a failed antenna array

In large antenna arrays, the possibility of occurrence of faults in some of the radiating elements cannot be precluded at all times. In such situations, the radiation pattern of the array gets distorted, mostly with an increase in sidelobe level and decrease in gain. Although it is not possible to restore the pattern fully by rearranging the excitations of the functioning elements, compensation methods have been reported in the literature for restoring one performance parameter of the array and making a trade‐off on some other parameter. In this article, we have made a study on the tolerance level of this compensation process. One part of the study deals with the thinning in the failed array, that is, to find a limit on the minimum number of functioning elements of the array that can restore the digital beamforming of the failed array. The second part of study deals with finding the maximum number of element failures that can be compensated. The study was carried out by optimizing the amplitude excitations of the failed array. Instead of classical optimization techniques, particle swarm optimization was used for the compensation process. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:635–645, 2014.     

Dynamic deviation reduction‐based concurrent dual‐band digital predistortion

This article introduces the concurrent dual‐band digital predistortion (DPD) architecture with only one upconvertion unit, which is suitable for the linearization of wideband power amplifiers (PAs) excited by concurrent dual‐band signals. By extending the conventional dynamic deviation reduction (DDR) model to the concurrent dual‐band mode, we propose two DDR‐based concurrent dual‐band models, the dual‐band DDR (DB‐DDR) model and the simplified dual‐band DDR (SDB‐DDR) model. The performance of these two models is experimentally assessed with two types of wideband PAs (a GaN Class F PA and a GaN Doherty PA) driven by the concurrent dual‐band signal, and compared with the prior two‐dimensional digital predistortion (2D‐DPD) model and the two‐dimensional modified memory polynomial (2D‐MMP) model. The results prove the good DPD performance and low computational complexity of the proposed models. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:401–411, 2014.     

MORM: A Multi-objective Optimized Replication Management strategy for cloud storage cluster

Effective data management is an important issue for a large-scale distributed environment such as data cloud. This can be achieved by using file replication, which efficiently reduces file service time and access latency, increases file availability and improves system load balancing. However, replication entails various costs such as storage and energy consumption for holding replicas. This article proposes a multi-objective offline optimization approach for replica management, in which we view the various factors influencing replication decisions such as mean file unavailability, mean service time, load variance, energy consumption and mean access latency as five objectives. It makes decisions of replication factor and replication layout with an improved artificial immune algorithm that evolves a set of solution candidates through clone, mutation and selection processes. The proposed algorithm named Multi-objective Optimized Replication Management (MORM) seeks the near optimal solutions by balancing the trade-offs among the five optimization objectives. The article reports a series of experiments that show the effectiveness of the MORM. Experimental results conclusively demonstrate that our MORM is energy effective and outperforms default replication management of HDFS (Hadoop Distributed File System) and MOE (Multi-objective Evolutionary) algorithm in terms of performance and load balancing for large-scale cloud storage cluster.     

12 MW热电联产装置运行总结

总结了12MW热电联产装置的特点及运行情况。实际运行情况证明,建设热电联产装置是以煤为原料的中、小氮肥企业彻底解决造气炉渣及细灰综合利用,使其变废为宝的一条重要途径,也是氮肥企业降低生产成本、增加效益、提高企业市场竞争力的必然选择。     

A global energy optimization framework for 2.1D sketch extraction from monocular images

The 2.1D sketch is a layered image representation, which assigns a partial depth ordering of over-segmented regions in a monocular image. This paper presents a global optimization framework for inferring the 2.1D sketch from a monocular image. Our method only uses over-segmented image regions (i.e., superpixels) as input, without any information of objects in the image, since (1) segmenting objects in images is a difficult problem on its own and (2) the objective of our proposed method is to be generic as an initial module useful for downstream high-level vision tasks. This paper formulates the inference of the 2.1D sketch using a global energy optimization framework. The proposed energy function consists of two components: (1) one is defined based on the local partial ordering relations (i.e., figure-ground) between two adjacent over-segmented regions, which captures the marginal information of the global partial depth ordering and (2) the other is defined based on the same depth layer relations among all the over-segmented regions, which groups regions of the same object to account for the over-segmentation issues. A hybrid evolution algorithm is utilized to minimize the global energy function efficiently. In experiments, we evaluated our method on a test data set containing 100 diverse real images from Berkeley segmentation data set (BSDS500) with the annotated ground truth. Experimental results show that our method can infer the 2.1D sketch with high accuracy.     

Transient Stability Enhancement of Multi–Machine Power Systems: Synchronization via Immersion of a Pendular System

In this paper the problem of designing excitation controllers to improve the transient stability of multi‐machine power systems is addressed adopting two new perspectives. First, instead of the standard formulation of stabilization of an equilibrium point, we aim here at the more realistic objective of keeping the difference between the generators rotor angles bounded and their speeds equal—which is called synchronization in the power literature—and translates into a problem of stabilization of a set. Second, we adopt the classical viewpoint of power systems as a set of coupled nonlinear pendula, and express our control objective as ensuring that some suitable defined pendula dynamics are (asymptotically) immersed into the power system dynamics. Our main contribution is the explicit computation of a control law for the two–machine system that achieves global synchronization. The same procedure is applicable to the n–machine case, for which the existence of a locally stabilizing solution is established.     

试论供电企业的电力营销管理方法

树立正确的营销意识,丰富营销方法,有利于供电企业更好地适应不断变化的市场,提供质量更高的市场服务。分析了供电企业电力营销中存在的问题,提出了具体的改革方法。