HART协议物理层设备的测试（II）

本文介绍HART协议物理层设备的测试要求、测试设备、测试方法及测试时的一些特别说明。     

无线网络中TCP与Ipsec的兼容性研究

针对有线网络设计的传输控制协议(TCP),在应用到无线环境中时存在许多不兼容问题,必须对TCP进行修改.目前人们提出了几种对TCP协议在无线网络环境下的改进方案,但是这些改进方案同IP安全协议(IPsec)存在一定的中突.文章分析了IPsec与TCP的改进方案之间的冲突问题,给出了4种解决方案:用传输层安全协议/安全套接层协议(TLS/SSL)代替IPsec、扩展封装安全载荷(ESP)协议、对TCP路径分段和修改IPsec的端到端保护模式,并分析了各方案的优缺点.     

多冗余点到点链路下OSPF扩散算法的一种改进方案

文章讨论了OSPF路由协议的扩散算法在多冗余点到点链路情况下存在的缺陷,提出了一种基于扩散接口选举的改进方案。     

互联网技术和国际互联网

本文先是说明internet、Internet和intranet各自的涵义和相互的区别 ,并简单介绍互联网的几项基本规约 ,包括IP、TCP、UDP、FTP、TFTP、SMTP和HTTP。其次说明WWW及其使用的超文本 /超媒体、浏览器和客户 /服务器技术的作用 ,解释Internet的骨干网和接入网以及内部网与防火墙。最后推测Internet的应用发展前景。     

A formal model of asynchronous communication and its use in mechanically verifying a biphase mark protocol

We present a formal model of asynchronous communication between two digital hardware devices. The model takes the form of a function in the Boyer-Moore logic. The function transforms the signal stream generated by one processor into that consumed by an independently clocked processor, given the phases and rates of the two clocks and the communications delay. The model can be used quantitatively to derive concrete performance bounds on communications at ISO protocol level 1 (physical level). We use the model to show that an 18-bit/cell biphase mark protocol reliably sends messages of arbitrary length between two processors provided the ratio of the clock rates is within 5% of unity.     

Cure reaction for modified diallylbisphenol A/diaminodiphenylsulfone/bismaleimide

The glass‐transition temperature as a function of curing conversion for a modified diallylbisphenol A/diaminodiphenylsulfone/bismaleimide (BMI) resin was investigated at different temperature regimes and modeled using a modified Di Benedetto equation. Although the relationship between the glass‐transition temperature and conversion of the BMI system conforms to the Di Benedetto equation for α < 0.6 and at lower cure temperatures, at higher cure temperatures the results deviated significantly from the equation; thus, it was an inadequate model for the system. Fourier transform IR analysis showed that the major crosslinking reactions did not occur during cure for the modified BMI at and below 150°C. However, as the cure temperature was increased, the crosslinking reactions responsible for 3‐dimensional network structures became more dominant. At 190°C the C? N? C_stretch vibration of the uncured maleimide ring converted into succinimide rings in the curing process. Simultaneously, a decrease was observed for the absorbance bands of ? C? H_bending (maleimide). The higher cure temperatures induced a significantly faster initial crosslinking rate and also resulted in a shorter period of time after which further crosslinking was retarded, because the increase in the crosslinks also physically slowed further crosslinking activity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 227–235, 2002     

VSP旅行时反演应用于VSP—CDP转换

非零偏移距垂直地震剖面(VSP)模型的制作是非零偏移距VSP资料处理的关键环节之一,是VSP-CDP转换的基础。本文试用旅行时反演修正非零偏移距VSP的模型,以加速模型的制作过程,提高非零偏移距VSP的处理速度。用合成VSP资料试算表明:旅行时的随机误差对模型的制作影响不大;只要能较准确地确定界面位置,用旅行时反演修改制作非零偏移VSP模型是可行的。本文还探讨了初始模型的不同选择方法,并将旅行时反演用于实际VSP资料的处理。结果表明,大大地节省了非零偏移距VSP资料的处理时间。     

通讯网的演进

在光纤高速传输技术、光交换与智能光网等与宽带接入、多媒体、3G等网络应用技术的推动下，建设基于IPv6协议的IP基础电信网成为可能。现在IP网正在朝着有序的、可管理的、有QoS保障的、可以支持各类业务的综合业务基础网演进。电信网也正在从网络接入层上、从长途网络层面上、从本地网络层面上、从固定网向含3G在内的移动网络等方面向支持IP技术及其综合业务的方面全面推进。     

Gas-phase selective oxidation of toluene on TiO2–sepiolite supported vanadium oxides: Influence of vanadium loading on conversion and product selectivities

Gas-phase selective oxidation of toluene has been carried out on vanadium oxide systems (5–20 wt.% of V₂O₅, equivalent to 0.4–1.7 theoretical monolayers) supported on TiO₂–sepiolite (with titania loading around the theoretical monolayer, 12 wt.%) and on sepiolite. A study has been made on both the influence of vanadia loading and of the support on the catalytic behaviour of the supported vanadium systems. The reducibility by H₂ TPR was also studied as well as the acid and basic/redox sites from the results of conversion of the 2-propanol test reaction of the solids. Benzaldehyde, benzoic acid and several coupling products were the main ones detected, attaining over 50% selectivity towards the benzaldehyde and benzoic acid products at a total conversion around 10%. The activity and selectivity to the selective products exhibited by vanadium systems supported on mixed support were superior to those exhibited by the systems supported on sepiolite and increased notably in both series with the increase in vanadium loading. The best catalytic behaviour exhibited by the vanadium systems supported on mixed support, which also exhibited the highest density of sites capable of being reduced (as well as their reducibility) and of those responsible for propanone formation, could be attributed not only to the different balance of the vanadia species existing in the two supports (monomeric + oligomeric/polymeric), but also to such other factors as the nature of the support and, concretely, its chemical composition.