高密度脉冲电流对A356铝合金凝固组织的影响

研究了高密度脉冲电流对A356铝合金凝固组织的影响，实验中对液相线以下溶体的凝固过程在不同阶段进行电脉冲处理。对比实验结果表明：经过电脉冲处理后，A356的合金凝固组织得到明显细化；在同样的电脉冲条件下，凝固组织细化效果与电脉冲放电开始时间有关，凝固过程中放电开始时间越早，凝固组织细化效果越明显；反之，凝固组织细化效果较差；同时，脉冲充电电压越高，凝固组织细化程度越大。定量计算了脉冲电流产生的电磁力并分析了脉冲电流影响凝固组织的作用机制。     

扩展接触器零部件通用性的研究

本文介绍了一种只用十几个分立元件的电子模块，与大型接触器配合使用，可使接触器节省铜线材料60％～70％，大大减少电磁系统的体积。预置电子模块的参数，可实现交流接触器在起动过程、吸持过程的最佳电流控制，为扩展接触器零部件通用性研制出节能、节材、无噪声等性能优良的小型而容易实施的交流接触器产品提供了依据。     

燃气加热托辊型网带炉生产线的研制与应用

介绍了燃气加热托辊型网带炉生产线的组成、燃气脉冲控制和空气/燃气比例连续调节技术和计算机多媒体集散控制系统.生产应用表明炉温均匀性良好,处理产品质量稳定,能耗成本降低,取得了明显的经济效益.     

一种检测电火花加工间隙状态的柔性方法

介绍了一种在数控电火花加工脉冲电源中实现间隙状态检测的柔性方法，具有阈值设置柔性、状态识别准确的特点，巧妙地用一个稳压二极管的钳位作用提高了间隙状态识别的精度，非常适合需经常改变加工参数的加工实验使用。     

4-methoxy-2,6-bis(3,5-dimethylpyrazoyl)-1,3,5-triazine modified carbon paste electrode for trace Cu(Ⅱ) determination by differential pulse volt-ammetry

A differential pulse voltammetric method was developed for the sensitive and selective determination of Cu(Ⅱ) at 4-methoxy-2,6-bis(3,5-dimethylpyrazoyl)-l,3,5-triazine modified carbon paste electrode in 0.05 mol/L KHC8H4O4 solution (pH = 4.02). The oxidation peak of Cu(Ⅱ) was observed at 0.065 V(vs Ag/AgCl) by scanning the potential in positive direc-tion. The analysis procedure consisted of an open circuit accumulation step in stirred sample solution. It was followed by medium exchange to a clean solution and subsequently an anodic potential scan was affected to obtain the voltammetric peak. The current was proportional to the concentration of the Cu(Ⅱ) ion in a range of 1× 10-7-1×10-4 mol/L for 6 min accumulation; the most of metal ions did not interfere with the determination. The developed method was applied to Cu(Ⅱ) determination in coal-ash sample, the results agreed with that of atomic adsorption spectroscopy(AAS).     

差分脉冲极谱法测定苯胺中微量硝基苯

建立了测定苯胺中微量硝基苯的差式微分脉冲极谱法。试验发现硝基苯在-0.57V(vs.Ag/AgCl)处有一个良好的差分脉冲极谱峰。硝基苯质量浓度在1～600μg/mL的范围内,质量浓度与差分脉冲极谱峰的峰高呈线性关系。此法简便、快速、灵敏,结果准确。     

Curing behavior and mechanical behavior of fully and semi-interpenetrating polymer networks based on polyurethane and acrylics

Polyurethane (PU) was made by reacting stoichiometric equivalent of trimethylol propane (TMP) and desmodur L. Fully interpenetrating polymer networks (fully IPN's) of various compositions based on PU and poly(ethylene glycol) diacrylate (PEGDA) were prepared by blending various ratios of PU/PEGDA, and cured by benzoyl peroxide (BPO). Semi-interpenetrating polymer networks based on PU and poly(ethylene glycol) monomethyl ether of acrylate (PEGMEA) were prepared in a similar way. Shift of exothermic peaks during IPN formation were examined with dynamic DSC. Viscosity increases were investigated with a Brookfield RVT type viscometer. Dynamic mechanical properties were probed via a rheometric dynamic spectroscopy (RDS).Expermintal results revealed a good compatibility of both IPN systems, as evidenced from the single damping peak of the RDS curves for each composition. Shifts of exothermic peaks to higher temperatures during the formation of fully IPN were observed, especially for the composition of PU/PEGDA = 50/50, which showed an exothermic peak at the highest temperature. Experimental results also revealed delayed viscosity increases and decreased gel fractions for all fully IPN's. On the contrary, the semi-IPN did not exhibibt similar phenomena. All these findings supported an effect of network interlock during fully IPN formation. The existence of a network not only provided a sterically hindered environment, but also restrained the chain mobility of the growing network, and vice versa, thus retarding the curing rates of both networks. Network interlock also broadened the width of the half damping peak, T_1/2, and subsequently led to improved mechanical properties such as the impact resistance and Young's modulus of fully IPN material.     

印制线路板微孔镀铜研究现状

印制线路板微孔金属化的关键在于在高厚径比的微孔中形成无空洞、无接缝、均匀的铜沉积层.综述了目前微孔填充技术的发展现状,对电镀过程中采用的电流密度、搅拌因素和电流波形等进行了探讨,重点讨论了添加剂对填孔效果的影响及其作用机理.     

羧基化高纯单壁碳纳米管修饰电极对乙酰甲喹的高灵敏检测

采用羧基化高纯单壁碳纳米管(c SWCNTs)固载于金电极表面来构筑乙酰甲喹电化学传感器。运用循环伏安法(CV)、差分脉冲伏安法(DPV)和电化学交流阻抗法(EIS)测定传感器的性能。结果显示,该传感器对乙酰甲喹的电化学还原具有显著的催化性能,修饰电极的峰电流达到-128.40μA,是裸电极峰电流的1167倍。通过对传感器性能影响因素的考察,得到最优制备条件为cSWCNTs涂覆量为4μL(质量分数0.10%分散液),搅拌速度1000 r/min,pH=7.0的PBS浓度为0.2 mol/L,-0.5V电压下富集30 min。在该条件下制备的传感器峰电流与乙酰甲喹在1～500nmol/L范围内呈良好的线性关系,相关系数为0.998,方法的检出限为0.76nmol/L。该传感器被成功地应用于实际样品检测,加标回收率在81.7%～124.0%。     

卡尔曼滤波在核脉冲全谱数据采集系统中的应用

针对核脉冲全谱数据采集技术中采用的深度加权滤波法在数据量少时平滑效果差、滞后大的缺点,设计了卡尔曼滤波算法替代传统滤波算法进行解谱的方案。滤波算法首先根据信号与噪声的状态空间模型,建立状态方程和测量方程,然后根据广义卡尔曼滤波对测量方程进行更新,最后根据现场的标准刻度井测量数据确定测量矩阵,对测量数据进行滤波。实测结果表明,该滤波算法相对于传统滤波算法,能够消除谱图的统计涨落,提高光滑度,遏制滞后,并保证滤波后曲线不失真。