基于柔性阵列传感器的脉象检测系统的设计

当前的脉象仪大部分采集手段单一,取脉压力的调节性差,无法模拟医生的布指方式,而且只能实现脉搏图的描记及分析,无法给出脉象的三维信息。针对这一问题研制了基于柔性阵列传感器的脉象检测系统,用硅胶制作了专门的脉搏换能器;设计了压力控制系统,实现压力自动调节,完成了对最佳取脉压力下脉象的采集;搭建了信号处理电路,实现了对脉象信号的提取和预处理;以USB-7660为核心构建了A/D采集系统,实现了对多路脉象信号的显示、存储。实验表明,该系统不仅可以有效采集到受试者的七路二维脉图,而且能清晰地观测到受试者的脉道宽度,并重建出相应脉搏波的三维传导地形图。     

Electronic locking devices based on microcontrollers and chaotic maps using Model-Matching Control

In this work a real-time communication system using Arduino® microcontrollers, applied to electronic locking devices, is implemented. Model-Matching Control is used to achieve synchronization between transmitter and receiver Arduino® microcontrollers using only one transmission channel. Model-Matching Control is fed with dynamics from both Arduinos. Transmitter Arduino® is used also to generate in real-time an encrypted chaotic code key based on the Chen map. Receiver Arduino® recover in real-time the chaotic code key that is a binary signal key of an electronic locking device and where wireless communication is made between the two Arduinos using Bluetooth modules. System evaluation in terms of performance, randomness, and time complexity, are shown, as well as experimental results and some discussions are presented.     

可编程脉冲产生器的设计及应用

文中针对脉冲产生器的市场供应与实际应用情况,给出了一种以单片机为CPU核心的可编程脉冲产生器的设计思路,阐述了完成该产生器的硬件结构和软件设计方法,并给出相应的硬件电路和软件设计流程;为了验证设计的合理性,将其应用于某测控系统的步进电机控制器中,并进行实验测试,结果表明该设计具有低成本、高可靠性等特点,特别是其脉冲宽度与周期可编程预置,不仅增加了设备的使用灵活性,而且扩大了应用范围,可推广应用于多种功能的测控系统中。     

视觉测量中多光学靶点亮度自适应控制

提出了一种面向大视场高精度视觉测量的多红外目标靶点（红外LED）亮度自适应控制方法。以微控制器PIC16F873A和LED驱动芯片MAX6964作为核心器件,设计了可满足大空间范围内靶点亮度控制需求的多目标靶点控制驱动器。为了使LED在近距测量时的调节精度和远近距离测量时的发光亮度都能满足要求,根据MAX6964输出特点设计了PWM信号输出电路,并采用推挽电路驱动LED。实验证明,目标靶点在CCD相机上成像光斑稳定一致。     

Hybrid function projective synchronization of chaotic systems with uncertain time-varying parameters via Fourier series expansion

In this paper, the hybrid function projective synchronization (HFPS) of different chaotic systems with uncertain periodically time-varying parameters is carried out by Fourier series expansion and adaptive bounding technique. Fourier series expansion is used to deal with uncertain periodically time-varying parameters. Adaptive bounding technique is used to compensate the bound of truncation errors. Using the Lyapunov stability theory, an adaptive control law and six parameter updating laws are constructed to make the states of two different chaotic systems asymptotically synchronized. The control strategy does not need to know the parameters thoroughly if the time-varying parameters are periodical functions. Finally, in order to verify the effectiveness of the proposed scheme, the HFPS between Lorenz system and Chen system is completed successfully by using this scheme.     

Adaptive synchronization of master–slave systems with mixed neutral and discrete time‐delays and nonlinear perturbations

This paper investigates the delay‐dependent adaptive synchronization problem of the master and slave structure of linear systems with both constant neutral and time‐varying discrete time‐delays and nonlinear perturbations based on the Barbalat lemma and matching conditions. An adaption law which includes the master‐slave parameters is obtained by using the Lyapunov functional method and inequality techniques to synchronize the master‐slave systems without the knowledge of upper bounds of perturbation terms. Particularly, it is shown that the synchronization speed can be controlled by adjusting the update gain of the synchronization signal. A numerical example has been given to show the effectiveness of the method. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Measurement of the heat of fusion of titanium and a titanium alloy (90Ti-6Al-4V) by a microsecond-resolution transient technique

A microsecond-resolution pulse heating technique was used for the measurement of the heat of fusion of titanium and a titanium alloy (90Ti-6Al-4V). The method is based on rapid (50- to 100-s) resistive self-heating of the specimen by a high-current pulse from a capacitor discharge system and measuring, as functions of time, current through the specimen, voltage across the specimen, and radiance of the specimen. Melting of the specimen is manifested by a plateau in the measured radiance. The time integral of the net power absorbed by the specimen during melting yields the heat of fusion. The values obtained for heat of fusion were 272 J · g^–1 (13.0 kJ · mol^–1) for titanium and 286 J · g^–1 for the alloy 90Ti-6Al-4V, with an estimated maximum uncertainty of ±6% in each value.Paper presented at the Second Workshop on Subsecond Thermophysics, September 20–21, 1990, Torino, Italy.     

A new microsecond pulse-heating system to investigate thermophysical properties of solid and liquid metals

A new discharge system for resistive self-heating has been constructed for the measurement of accurate thermophysical properties. A constant-current pulse is used to heat metals over a time interval of 50 to 100 s, reaching temperatures up to the boiling point. New techniques have been developed to obtain sound speeds in the pulse-heated sample, emissivities, and vapor pressure. A new pyrometer allows the extension of the measured temperature range down to the melting point of copper.     

基于小波变换的语音同步方法研究

为提高语音通信干扰效果客观评估中标准语音文件和受扰语音文件的同步精度,对军标GJB4405A-2006中规定的标准语音文件增设了高低频交叉的双音频同步头;介绍了小波消噪的原理,利用2层sym小波对受扰语音文件进行了消噪处理,将同步头中的高频信号作为噪声进行大幅削弱;设计了基于幅度比较的同步算法,找出同步基准点,并对20组受扰严重的语音文件的进行了仿真测试,仿真结果证明了该方法得到的同步精度符合后续数据处理的要求。     

分数阶Chen混沌系统同步及Multisim电路仿真

本文针对参数已知和未知的分数阶Chen混沌系统,研究其同步控制问题。利用分数阶系统稳定性理论,设计并实现了系统的反馈控制器;同时运用Multisim软件设计实现了分数阶系统同步的混沌电路,验证了所提出同步方法的有效性和可实现性。