固体颗粒介质成形新工艺及变形研究

固体颗粒介质成形新工艺,是采用固体颗粒代替刚性凸模(或弹性体、液体)的作用,对金属板料成形的工艺。固体颗粒介质成形新工艺,即可以解决流体介质、粘性介质的密封难题,又具有内压非均匀分布、便于控制成形、提高材料成形极限、降低投资成本、所得零件表面质量高、成品率高的优点,且固体颗粒无工业污染,可重复使用。该工艺为材料的加工制备提供了新的方法和手段。利用塑性增量理论,对自由变形区任意一点的应变进行了分析,得到了自由变形区任一点的应变及厚度计算公式。采用固体颗粒介质成形工艺,进行板料成形试验,成功试制出多种典型工件;对试验件壁厚分布的计算值和实测值进行了比较,证明理论正确。     

板金液压柔性技术及其产品设计

板金液压柔性成形具有诸多的优点,受到了汽车、航空航天等领域设计和研究者的普遍重视。文章主要介绍了板金液压柔性成形技术的内涵和外延,针对所提出的无模液压柔性成形技术和复合液压柔性成形技术,从不同的工艺方法入手,基于所研制的液压柔性成形设备,介绍了相关的飞机等领域产品特点以及设计要点,并对其中的关键工艺参数进行了描述。     

圆锥形零件冲压成形极限的确定

圆锥形零件极限变形程度可用极限拉深系数［ｍｚｄ］＝［ｄ２／Ｄ０］来表示。根据圆锥形零件与圆筒形零件的内在联系，经力学分析得出了便于实用的圆锥形零件极限拉深系数［ｍｚｄ］的计算表达式，并由此给出了用［ｍｚｄ］所表示的成形极限曲线和第一次拉深时的极限拉深系数。经实验验证表明所确定的成形极限是准确和可靠的。     

Surface roughness of a hot-dipped galvanized sheet steel as a function of deformation mode

A hot-dipped galvanized zinc-coated sheet steel was deformed with three different laboratory test systems: a Marciniak punch system, a flat-die friction test system, and a cupping system. These systems were able to impose various combinations of deformation modes to the sheet. The deformation modes include: (1) strain without die contact, (2) sliding, (3) pressing, and (4) bending. Strain measurements from the electrolitically gridded specimens were made at the same locations as surface profilometry measurements, allowing a direct correspondence of surface roughness with strain. Quantification of the roughening as a function of strain, sliding and bending was determined. The roughening rate depends upon the strain level as well as the strain path. Increased strain without die contact causes an increase in the surface roughness with strain paths close to plane strain exhibiting the highest roughening rate. The deformation modes of sliding, pressing, and bending cause a decrease in the surface roughness (i.e. smoothing) to occur. A first-order model is proposed to account for the surface roughness as a function of these deformation modes.     

双金属复合板带可逆冷轧有限元模拟

本文应用ANSYS有限元软件分析了热轧复合的不锈钢复合板在冷轧过程中的变形特性和界面上应力应变分布 ,分析确定了界面结合强度 ,以及确定成卷可逆带张力冷轧时的最大道次压下量值。用 3D FEM模拟了接触表面上的应力 ,计算出总轧制压力 ,与理论公式进行了对比。     

硅钢片"以冷代热"是大势所趋

概述了硅钢片的生产历史、冷轧硅钢片的优点和国家“以冷代热”的政策，并对目前硅钢片“以冷代热”仍存在的困难进行了分析。     

In-plane anisotropy of 1545 aluminum alloy sheet

1　INTRODUCTIONThe in plane anisotropy of mechanical proper ties brings the limitation to the use of alloy sheet.At the same time, during the material processing,the difficulties of contour machining will also be in creased. For this reason, when designing high performance aluminum alloy sheets, the in planeanisotropy is an important performance parameterthat must be considered. Studies have shown thatminor Sc and Zr in the Al Mg Mn alloy can refinegrains of cast ingot, inhib…     

高成形性罐用铝材的高效熔体综合处理效果

以较低品位工业纯铝(Al99．5)为原材料、用自行开发的高效熔体综合处理技术制备1种高成形性压力罐用铝材(简称铝原块)，该技术的处理效果表明：除杂率和针孔率分别降低81．97％和87．00％，晶粒尺度减小，富铁杂质相由较粗大长针(条)状变成细小的短棒状或圃球状，其圃整度为1．23，提高了材料的冶金品质和力学性能，伸长率和断面收缩率分别提高64．7％和65．4％，铝原块用料低品化是可行的。     

薄板T型接头焊接温度场的研究

应用大型有限元分析软件ABAQUS,对不同材料薄板T型接头建立适当的模型进行温度场分析,并采用热电偶进行试验测量。结果表明,在焊缝附近,试验结果与模拟结果有较好的一致性,而在离焊缝较远的热影响区,由于材料性能数据的匮乏,导致结果有一定差异,但对于如注重焊缝附近温度变化的场合,该模型有一定的应用价值。