俄罗斯减速器涡轮钻具驱动PDC钻头在西西伯利亚油田的成功应用

涡轮钻具由前苏联研制出来以后，得到了迅速发展，目前已发展到减速器涡轮钻具阶段。现在，俄罗斯西西伯利亚地区普遍使用减速器涡轮钻具钻井，而减速器涡轮钻具驱动PDC钻头的使用还是空白。采用俄罗斯生产的几种不同型号的减速器涡轮钻具，在西西伯利亚进行了驱动PDC钻头钻井的阶段性试验。试验结果表明，在优选PDC钻头结构的情况下，用减速器涡轮钻具驱动PDC钻头，钻头进尺和机械钻速都较牙轮钻头有显著的提高，经济和社会效益显著。介绍了试验中使用的3种俄罗斯减速器涡轮钻具(TPM-195，TPⅢ-195和TPO3—195)的结构特点和主要技术参数。     

新型刮刀钻头的设计及现场试验研究

在理论分析的基础上，综合PDC钻头和刮刀钻头的优点，设计了一种新型的刮刀钻头，并进行了现场试验。现场试验结果表明，该钻头运转平稳，采用低钻压、高转速，钻进速度快，井眼规则通畅，有较明显的防斜作用，该种钻头的推广应用对提高钻井工程的整体效益具有十分重要的意义。     

裂缝各向异性介质中P-SV转换波正演模拟

裂缝介质正演是研究裂缝性油藏的各向异性、裂缝检测方法、裂缝AVO反演等的前提。在裂缝方位各向异性(EDA)介质模型的基础上，重点研究了纵波震源激发的地震波所产生P-SV波的有限差分正演模拟方法。从各向异性单斜对称系统的刚性矩阵推导出的波动方程，可以满足EDA介质模型不同方位角入射的二维差分模拟要求。在有限差分模拟中，采用了普通的Kelly差分格式、二阶各向异性吸收边界条件和一般的纵波震源的解析形式，并应用修正的通量传输校(FCT)方法来消除频散。同时，对纵波震源的解析式进行了技术处理，取得了较好的效果。     

An Experimental Investigation into the Feed Rate Capacity of Rotary Valve and Blow Tank Feeders

Industry widely uses rotary valves and blow tanks for the pneumatic conveying of products, each having their pros and cons depending on the specific application. This article shows the differing results obtained when low-velocity conveying a product through a common pipeline using both a drop-through rotary valve and a bottom-discharge blow tank feeder. A number of issues arise in the rotary valve system, the main one being rotary valve air leakage. A blow tank system, on the other hand, does not leak, as it is an enclosed system. The experimental results show dramatic differences in product throughput. Further exploration leads to a novel modification being made to the rotary valve system in an attempt to increase its capacity. The result of this modification shows a slight increase in output tonnage, but still significantly less than that obtained from the blow tank.     

降低气体悬浮焙烧炉焙烧过程中Al_2O_3粒度破损的措施

为了降低气体悬浮焙烧炉焙烧过程中Al_2O_3粒度的破损,对气体悬浮焙烧炉焙烧过程中氧化铝粒度的影响因素进行了分析,提出了降低粒度破损的一些措施。     

Effect of gas mixing ratio on gas-phase composition and etch rate in an inductively coupled CF4/Ar plasma

In this work, we carried out investigations aimed at understanding the effect of gas mixing ratio on plasma parameters, gas phase composition and etch rate in CF₄/Ar inductively coupled plasma. For this purpose, a combination of experimental methods and modelling was used. Experiments showed that electron temperature and electron density are not very sensitive to variations of Ar content in CF₄/Ar plasma. From a zero-dimensional plasma model, the densities of both neutral and charged particles change monotonically. The analysis of surface kinetics based on an ion-assisted etching mechanism showed the possibility of non-monotonic etch rate behaviour due to a concurrence of chemical and physical etching pathways.     

Filtration of Non-Newtonian Hydrocarbon Fluid in a High-Frequency Electromagnetic Field

The paper gives the results of experimental investigations of the initial pressure gradient of bituminous oil and the time dependences of variation of the temperature in a formation model and of the well production rate in a microwave-frequency electromagnetic field. The effect of strong decay of the non-Newtonian properties of bituminous oil is revealed. The nonuniformity of temperature distribution over the formation thickness is demonstrated, which depends on the initial production rate of the well and on the duration of stimulation of the bottom-hole zone of formation.     

黑岱沟露天矿重型汽车预防性维修的探讨

通过对黑岱沟露天煤矿运输设备出动率调查,初步分析了目前主要运输设备的现状以及存在问题的原因和影响因素,就加大预防性维修的比重,实行全面的预防性维修制度提出了一些看法。     

东方N-18250-2型凝汽器胶球清洗系统改造

对湘潭电厂存在已久的胶球清洗装置收球率低的问题进行了深入探讨，结合电厂对胶球清洗系统的改造、试验过程，分析并提出了影响胶球清洗装置清洗效果及收球率的诸多原因及其解决方法。     

高可靠性烧结金属丝网防爆元件的应用研究

烧结金属多孔元件作为隔爆元件的应用，很好地满足了火焰过滤元件的性能要求，进一步拓宽了烧结金属多孔元件的应用领域，章在论述其性能特点、结构类型的同时，对其在微孔结构设计上的差异也进行了描述。