KYN44-12型中置柜联锁装置的改进设计

介绍了12kV中置柜联锁装置的设计原则,分析了现有中置柜联锁装置在实际运行中存在的问题和不足,提出了改进和完善中置柜联锁装置的设计方法。实际应用表明,改进后的中置柜联锁装置的功能更加完善,安全性更加可靠,完全达到了五防闭锁要求。     

基于D-FNN的混沌铁磁谐振系统非线性补偿控制方法

针对电网混沌铁磁谐振系统产生的混沌现象,提出基于动态模糊神经网络的混沌铁磁谐振系统非线性补偿控制方法。该方法采用动态模糊神经网络来逼近系统的非线性部分,消除了过电压的混沌现象,将系统稳定到目标位置,实现了对系统的非线性补偿控制。Matlab仿真结果表明,基于动态模糊神经网络的非线性补偿控制方法控制结果正确,响应快速。     

中置式高压电容器柜改进设计

分析了南屯煤矿白马河风井变电所高压电容器柜原设计方案存在的问题,并对其进行了改进设计:选用适用于容性负载的真空断路器;添加放电线圈,并将放电线圈与电容器直接并联,使放电线圈与电容器组成一个完整的放电回路;添加接地开关,接地开关既有机械闭锁又有电气联锁,操作方便,安全性高。实际应用表明,改进设计后的高压电容器柜功能更加完善,更加安全、可靠。     

坦克炮控系统摩擦扰动补偿研究

针对坦克水平向炮控伺服系统中存在的摩擦不确定因素及未建模动态,首先建立水平向炮控伺服系统的数学模型,将摩擦扰动和未建模动态视为一个综合扰动项,然后利用扩张状态观测器对综合扰动项进行观测和补偿,并将扩张状态观测器(ESO)补偿回路作为经典PID控制方法的内回路,实现ESO-PID的复合控制;最后对所用方法进行仿真,结果表明,在原有控制方法的基础上设计控制器,集合了PID控制算法的"被动抗扰"和自抗扰控制方法中扩张状态观测器的"主动抗扰"特性,能够在保持控制系统原有特性的基础上大幅度提高炮控系统的稳定精度以及低速性能。     

石英晶体振荡器的微处理器温度补偿技术研究

为改善石英晶体振荡器的频率特性,减小温度影响,通过对石英晶体振荡器的频率-温度特性的研究,提出了以微处理器（STC89C52RC）为核心的基于AT切晶体谐振器的温度补偿技术,并介绍了系统结构、补偿原理及硬件电路,给出了补偿结果。本设计具有结构简单、功耗低等优点。     

A new oxyapatite red phosphor Eu3+-doped Ca3Y7(BO4)(SiO4)5O: Synthesis,structure and luminescence properties

A series of new oxyapatite red phosphors Ca₃Y₇(BO₄)(SiO₄)₅O doped with different concentrations of Eu³⁺ were successfully synthesized by high temperature solid state method. The X-ray diffraction (XRD) Rietveld refinement results show that the structure of the phosphor belongs to space group P6₃/m and Eu³⁺ ion replaces Y³⁺ ion. The emission spectrum consists of the characteristic emission peaks corresponding to Eu³⁺ under the excitation of 274 nm and the dominant emission peak is at 614 nm (⁵D₀→⁷F₂ of Eu³⁺). The concentration quenching effect occurs and the optimized Eu³⁺ concentration is 4.0 mol%. The energy level diagram for luminous mechanism is also given and the non-radiative energy transfer mechanism between Eu³⁺ is mainly exchange interaction. The CIE coordinate is close to the ideal red light and the color purity is higher than 99.79%. Moreover, the phosphor exhibits moderate thermal stability because the photoluminescence intensity at 423 K is still maintained at higher than 78.97% of that at room temperature. The internal quantum efficiency of Ca₃Y₇(BO₄)(SiO₄)₅O:4.0 mol%Eu³⁺ phosphor is 58.2%. A red light emitting diode (LED) device based on it can emit bright red light. The CCT values of the device are basically unchanged when driven by various bias current. The results show that Ca₃Y₇(BO₄)(SiO₄)₅O:Eu³⁺ is a new type of oxyapatite red fluorescent material with good comprehensive performances.     

用RAP法引上技术生长KCL晶体

用RAP法(reactivo atmosphere process)处理KCl熔体,在不改变生长气氛和RAP继续处理的情况下,提拉生长KCl晶体,以解决高纯、大尺寸、生长速度快、成品率高和有较大经济效益的问题。     

Fall detection for multiple pedestrians using depth image processing technique

A fall detection method based on depth image analysis is proposed in this paper. As different from the conventional methods, if the pedestrians are partially overlapped or partially occluded, the proposed method is still able to detect fall events and has the following advantages: (1) single or multiple pedestrian detection; (2) recognition of human and non-human objects; (3) compensation for illumination, which is applicable in scenarios using indoor light sources of different colors; (4) using the central line of a human silhouette to obtain the pedestrian tilt angle; and (5) avoiding misrecognition of a squat or stoop as a fall. According to the experimental results, the precision of the proposed fall detection method is 94.31% and the recall is 85.57%. The proposed method is verified to be robust and specifically suitable for applying in family homes, corridors and other public places.     

A low-cost real time virtual system for postural stability assessment at home

Background and objective

The degeneration of the balance control system in the elderly and in many pathologies requires measuring the equilibrium conditions very often. In clinical practice, equilibrium control is commonly evaluated by using a force platform (stabilometric platform) in a clinical environment.In this paper, we demonstrate how a simple movement analysis system, based on a 3D video camera and a 3D real time model reconstruction of the human body, can be used to collect information usually recorded by a physical stabilometric platform.

Methods

The algorithm used to reconstruct the human body model as a set of spheres is described and discussed. Moreover, experimental measurements and comparisons with data collected by a physical stabilometric platform are also reported. The measurements were collected on a set of 6 healthy subjects to whom a change in equilibrium condition was stimulated by performing an equilibrium task.

Results

The experimental results showed that more than 95% of data collected by the proposed method were not significantly different from those collected by the classic platform, thus confirming the usefulness of the proposed system.

Conclusions

The proposed virtual balance assessment system can be implemented at low cost (about 500$) and, for this reason, can be considered a home use medical device. On the contrary, astabilometric platform has a cost of about 10,000$ and requires periodical calibration. The proposed system does not require periodical calibration, as is necessary for stabilometric force platforms, and it is easy to use. In future, the proposed system with little integration can be used, besides being an emulator of a stabilometric platform, also to recognize and track, in real time, head, legs, arms and trunk, that is to collect information actually obtained by sophisticated optoelectronic systems.     

Event-driven,pattern-based methodology for cost-effective development of standardized personal health devices

Experiences applying standards in personal health devices (PHDs) show an inherent trade-off between interoperability and costs (in terms of processing load and development time). Therefore, reducing hardware and software costs as well as time-to-market is crucial for standards adoption. The ISO/IEEE11073 PHD family of standards (also referred to as X73PHD) provides interoperable communication between PHDs and aggregators. Nevertheless, the responsibility of achieving inexpensive implementations of X73PHD in limited resource microcontrollers falls directly on the developer. Hence, the authors previously presented a methodology based on patterns to implement X73-compliant PHDs into devices with low-voltage low-power constraints. That version was based on multitasking, which required additional features and resources. This paper therefore presents an event-driven evolution of the patterns-based methodology for cost-effective development of standardized PHDs. The results of comparing between the two versions showed that the mean values of decrease in memory consumption and cycles of latency are 11.59% and 45.95%, respectively. In addition, several enhancements in terms of cost-effectiveness and development time can be derived from the new version of the methodology. Therefore, the new approach could help in producing cost-effective X73-compliant PHDs, which in turn could foster the adoption of standards.