一个高电阻值测量电路

介绍一种新的高阻测试方法，可满足对高达１×１０＾１６Ω的测试要求。测试结果显示，对于１×１０＾１３Ω重复误差优于±２％。高阻测试电路通过接口与６８０９微机配套使用，操作简便，读数直观，便于长时间重复测量。     

对梁,底组合步进式加热炉半热滑轨的改进实践

介绍了间断式半热滑轨的研制和应用过程，以及经过节能技术改造，用新型半热滑轨代替老式滑轨的使用。实践表明，不但解决了以往的水梁漏水的问题，而且使线Ｃ级品率提高了３．３９％，每年可增产３５００ｔ线材，吨钢热涌单耗降低０．１４ＧＪ，年创经济效益２３９万元。     

Surface treatment for adhesive-bonded joints by excimer laser

In this work a treatment for surface preparation to improve mechanical resistance in adhesive bonding of plastic composites reinforced with fibres and metallic material, has been performed using an excimer laser. The following couplings have been selected to reproduce joints commonly used in the aerospace and automotive industry: CFC (carbon fibre composite) with CFC, CFC with Al 2024T3, Al 99% with Al 99%, GFC (glass fibre composite) with zinc-coated sheet in low carbon steel FeP01. The surfaces have been prepared using an excimer laser, adopting several values of laser parameters. The obtained surfaces have been examined by optical and scanning electron microscope: comparative measures of wetting and roughness have been performed to obtain an accurate characterisation and to select the proper finishes suitable to improve the mechanical resistance of the joints. The results obtained show that laser treatment always improves the final resistance of the joint; notable increases, and no significant surface damages have been highlighted. Better results have been obtained with the Al 99% with Al 99% joints which, with a low number of pulses treatment, have shown an increase of mechanical resistance up to the 70%.     

绥高#2线线路保护2动作分析

对高岭站2009年6月15日绥高#2线线路保护动作的原因进行深入分析,介绍处理措施。     

Effects of computers on Japanese schools

In this paper I consider how the computer can or should be accepted in Japanese schools. The concept of teaching in Japan stresses learning from a long-term perspective. Whereas in the instructional technology, on which the CAI or the Tutoring System depends, step-by-step attainments in relatively short time are emphasized. The former is reluctant in using the computer, but both share the Platonic perspective which are goal-oriented. However, The Socratic teacher, who intends to activate students' innate disposition to be better, would find another way of teaching and use of the computer.     

Electronic locking devices based on microcontrollers and chaotic maps using Model-Matching Control

In this work a real-time communication system using Arduino® microcontrollers, applied to electronic locking devices, is implemented. Model-Matching Control is used to achieve synchronization between transmitter and receiver Arduino® microcontrollers using only one transmission channel. Model-Matching Control is fed with dynamics from both Arduinos. Transmitter Arduino® is used also to generate in real-time an encrypted chaotic code key based on the Chen map. Receiver Arduino® recover in real-time the chaotic code key that is a binary signal key of an electronic locking device and where wireless communication is made between the two Arduinos using Bluetooth modules. System evaluation in terms of performance, randomness, and time complexity, are shown, as well as experimental results and some discussions are presented.     

可变频变压器的建模仿真与分析

采用高压直流输电方式连接两个异步电网存在谐波干扰、换相失败、难以实现功率平滑调节、无功功率不能随有功功率传输等问题。文章介绍了可变频变压器的的基本结构及原理,研究了可变频变压器的数学模型及控制模型,给出了可变频变压器传输功率与直流驱动电动机提供的驱动转矩之间的数学关系式,在此基础上采用PSCAD软件搭建了可变频变压器模型并进行了仿真研究。仿真结果表明,可变频变压器可以实现两个异步电网之间的连接并进行功率双向平滑传输,响应速度快;通过转速控制器控制直流驱动电动机的转速可使旋转变压器的转速恒定,以弥补两个电网的频差,维持系统平衡。     

An FEC scheme combined with weighted scheduling to reduce multicast packet loss in IPTV over PON

Congestion is one of the most important challenges in optical networks. In a Passive Optical Network (PON), the Optical Line Terminal (OLT) is a bottleneck and congestion prone. In this paper, a framework is proposed with Forward Error Correction (FEC) at the IP layer combined with Weighted Round Robin (WRR) at the scheduling level to overcome packet-loss due to congestion in the OLT in order to achieve efficient video multicasting over PON. In the FEC scheme, Reed-Solomon (RS(n,k)) with erasure coding is used, where (n−k) erroneous symbols per n symbol blocks can be corrected. In our framework, an Internet Protocol TeleVision (IPTV) service provider uses the mentioned RS coding and generates redundant packets from regular IPTV packets in such a way that an Optical Network Unit (ONU) can recover lost packets from received packets, thus resulting in a better video quality. Simulation results show that using the proposed framework, an ONU can recover many lost packets and achieve better video quality under different traffic loads for its users. For instance, the proposed method can reduce packet loss rate by almost 55% and 10% under traffic load 0.9, respectively, compared with the Round Robin (RR) and WRR methods under symmetric traffic load. When High Receivers Queue (HRQ) traffic (i.e., traffic received by many users) is twice Low Receivers Queue (LRQ) traffic (i.e., traffic received by a small number of users), this reduction is almost 86% and 30% under traffic load 0.9. Finally, when LRQ traffic is twice HRQ traffic, the reduction in packet loss rate is almost 70% and 91% at traffic load 0.5.     

基于种群多样性的自适应PSO算法求解VRPSPD问题

为有效求解逆向物流车辆路径(VRPSPD)模型,本文提出一种基于种群多样性的自适应PSO算法(SDAPSO)。在SDAPSO运行时,根据种群多样性,自适应地对种群中运行较差的粒子进行扰动操作,提升这些粒子向最优解收敛的能力;同时,对全局最优粒子进行概率扰动,以增加种群的多样性。标准检测函数的仿真结果表明SDAPSO算法是对基本PSO算法的有效改进。在对VRPSPD模型求解中,通过与其它粒子群算法相比,表明SDAPSO是求解该类问题的一种有效方法。     

基于标准件库的螺钉联接自适应设计

提出一种AutoCAD环境中基于标淮件库的螺钉联接自适应设计算法。利用螺钉和垫片以及被联接件之间设计信息的相关性自动确定装配方位及联接件的几何参数，自动检测和复原被联接件的剖面线，简化了设计过程。