尾矿堆场对地下水及其水质影响的联合模拟研究

矿产资源开发利用后的废弃物堆场常处水文地质条件复杂、区域内外边界不规整的地带。为了客观评价堆场渗漏对地下水及其水质的影响,本文提出了适宜于复杂水文地质条件、复杂内外边界条件的地下水与地下水中污染物分布规律联合模拟分析的非构造网格FVM数值模型,通过在某化工行业尾矿堆场渗漏评价的具体应用,取得了很满意的结果。     

Development,construction, and use of pneumometric tubes for measurement of steam flow in the steam lines of PVG-1000 at NPP

A system for the direct measurement of steam flow in steam lines after a steam generator, which utilizes a special design of pneumometric tubes and a computing unit that accounts for variation in steam pressure, has been developed to improve the quality of water-level regulation in the steam generators of VVéR-1000 power-generating units in the stationary and transitional modes. The advantage of the pneumometric tubes consists in their structural simplicity, high erosion resistance, and absence of irrevocable losses during measurement of steam flow. A similar measurement system is used at foreign NPP. The measurement system in question has been placed in experimental service at the No. 3 unit of the Balakovo NPP, and has demonstrated its worthiness. This measurement system can also be used to determine steam flow in the steam lines of NPP units with VVéR-1000 and VVéR-440 reactors, and PBMK-1000 power-generating units. __________ Translated from élektricheskie Stantsii, No. 3, March 2007, pp. 23–26.     

无篦条可逆锤式破碎机

首先介绍了锤式破碎机的现状及发展前景，主要阐述了无篦条可逆锤式破碎机的工作原理，较详细地介绍了本机的结构特点和性能优点。     

重油催化裂化装置再生器的改造

上海石化股份公司重油催化裂化装置为反应沉降器与再生器并列布置 ,两个再生器同轴布置。通过处理能力由 0 .8Mt/a提高至 1.0Mt/a的局部改造后 ,该装置产生了外取热器无法正常投用 ,两个再生器烧焦比例不易合理分配、第一再生器 (一再 )烧焦强度较低、剂油比偏低及催化剂单耗偏高等问题。因此 ,又对再生器进行了改造 :将一再船形待生催化剂分布器改为Y形分布器、在一再密相床上部增设格栅、外取热器催化剂返回分布器增设软密封、待生催化剂输送线路由斜管 立管 斜管的形式改为斜管形式等 ,改造效果好。     

苏州市区域形象新论

本文从区域形象有关理论入手 ,分析了影响苏州城市形象的地理区位、经济水平、社会文化、政策与规划 ,等有关因素 ,在此基础上提出苏州城市形象应定位于高科技城、人居天堂、文化城和旅游风景城等方面进行了探讨 ,并从城市形象系统的层面上提出了相关问题及建议。     

NUMERICAL SIMULATION OF TIP-CLEARANCE FLOW IN CASCADE

1 .　ＩＮＴＲＯＤＵＣＴＩＯＮＴｉｐ ｃｌｅａｒａｎｃｅｆｌｏｗｓｏｃｃｕｒｉｎｖａｒｉｏｕｓｅｎｇｉｎｅｅｒ ｉｎｇａｐｐｌｉｃａｔｉｏｎｓｓｕｃｈａｓａｘｉａｌ ｆｌｏｗ ｐｕｍｐｓａｎｄｄｕｃｔ ｅｄｐｒｏｐｅｌｌｅｒｓ .Ｔｈｅｉｎｅｒｔｉａｌｆｏｒｃｅｓａｃｔｉｎｇｕｐｏｎｔｈｅｆｌｕｉｄｉｎｔｈｅｎａｒｒｏｗ ｇａｐｂｅｔｗｅｅｎｂｌａｄｅｔｉｐａｎｄｔｈｅｓｕｒｒｏｕｎｄｉｎｇｗａｌｌａｒｅｓｕｆｆｉｃｉｅｎｔｔｏ ｇｅｎｅｒａｔｅａｔｉｐｌｅａｋａｇｅｖｏｒｔｅｘｏｎｔｈｅｓｕｃｔｉｏｎｓ…     

Power Management Based Grid Routing Protocol for IEEE 802.11 Based MANET

MANET(Mobile Ad Hoc Network)is a collection of wireless mobile nodes forming a temporary communica-tion network without the aid of any established infrastructure or centralized administration.The lifetime of a MANETdepends on the battery resources of the mobile nodes.So energy consumption may one of important design criterions forMANET.With changing the idle model to sleep model in the grid environment,this paper proposes a new energy-awarerouting protocol.Performance simulation results show that the proposed strategy can dynamic balance the traffic load in-side the whole network,extend the lifetime of a MANET,and without decreasing the throughput ratio.     

栅板注射模设计

分析了栅板零件的工艺性 ,介绍了栅板注射模的设计方案及设计要点 ,并对浇注系统的设计计算作了较详细的阐述。该模具经生产验证 ,各部件动作灵活、可靠 ,生产的塑件质量符合要求。     

基于蚁群算法的区域覆盖卫星星座优化设计

首先建立了以区域覆盖性能为目标的卫星星座参数优化模型,通过在连续域定义新的蚂蚁分类与转移策略改进了蚁群算法,使算法能够兼顾多目标优化时目标不兼容的情况,给出了基于该算法实现星座参数优化的框架。优化仿真实验验证了该算法的有效性,可为星座方案决策提供有力的支持。     

面阵列封装器件的贴装技术

面阵列封装器件在电子产品中的使用率逐年上升，如何实现其高速贴装是影响生产线效率的重要因素。从不同的角度论述了面阵列封装器件实现高速贴装的手段与技术。