烧结成品运输自动控制系统的改进

对烧结成品运输自控系统不稳定性因素进行了分析，提出了采取优化硬件外围工作环境，完善软件保护程序等改进措施。改进后的自控系统稳定性明显提高。     

Modified CIELAB formula tested using a textile pass/fail data set

The proposed new color-difference formula of CIE TC 129, which is a modified version of CIELAB, was tested with a recently published data set of textile pass/fail judgments. Goodness of fit is improved, if the parameter of lightness is set near 2, and if, additionally, a weight function for lightness is defined that reduces the weight of a lightness difference with lightness level in relation to chroma or hue scaling. © 1994 John Wiley & Sons, Inc.     

A new voltage control equipment using fuzzy inference

Power system control equipment needs higher sensitivity and operational reliability. Advanced voltage control equipment is needed for reducing the frequency of tap changes and improving the characteristics (the relationship between the actual voltage and reference voltage) of the voltage to meet today's power system requirements. However, these objectives are in a trade-off relationship. Studies of voltage control derived from a knowledge base suitable for electric power systems can satisfy these objectives using fuzzy inference. Compared with corresponding conventional equipment, the new equipment improved the deviation of 30 min average voltage of 30 percent. This paper describes the design concept of new voltage control equipment using fuzzy inference. In addition, field test results are described along with rules of fuzzy inference, membership functions, and the deviation of 30 min average voltage through detailed simulation.     

金安金沙江悬索桥隧道式锚碇变形破坏机制研究

隧道式锚碇的变形破坏机制涉及到结构与围岩的协同作用问题。以华丽高速公路金安金沙江悬索桥两岸隧道锚变形破坏机制为研究对象,利用工程类比法评价了其稳定性控制要素,设计了超载数值试验。根据塑性区的扩展过程确定了施工安全监测和需要采取预加固的重点部位,确定了隧道锚围岩的破坏模式。根据锚面监测点位移由mm到cm量级突变确定的两岸锚岩系统极限荷载均为6~8倍设计缆力,则锚岩系统的设计承载力取3倍设计缆力下变形安全是有保障的。丽江岸塑性区在10 P下贯通;华坪岸塑性区在14 P下贯通。设计缆力作用下,丽江岸锚碇最大位移1.5 mm、围岩1.2 mm、地表0.5 mm;华坪岸锚碇最大位移1.7 mm、围岩1.5 mm、地表0.7 mm,其响应顺序为后锚面监测点前锚面监测点锚碇中间岩体地表点,可作为后期结构及围岩安全监测布点和预警的参考,也证明当前设计缆力下变形和强度均是安全的。     

Relay selection with feedback beamforming information through designed sector sweep report frame for mmWave WPANs

This paper proposes a novel relay selection strategy based on the feedback beamforming （BF） information through designed sector sweep （SSW） report frame for millimeter-wave （mmWave） wireless personal networks （WPANs）. First, an SSW report frame compatible with IEEE 802.11ad standard is designed. Second, an approach collecting instantaneous channel state information （CSI） overheard during BF is devised. Third, with the aim of minimizing the outage probability and maximizing the overall network throughput capacity, the optimal relay selection issue for non-line-of-sight （NLoS） links is formulated as a bipartite graph, and Kuhn Munkres （KM） algorithm is provided to resolve it. Both theoretical analysis and simulation results show, with CSI considering NLoS conditions and selected relays according to the overall network throughput capacity maximization principle, the improvements achieved over opportunistic relay selection strategy in terms of overall network throughput capacity and outage probability with minimal modifications to IEEE 802.1lad.     

电力系统继电保护整定计算软件探析

介绍电力系统继电保护整定计算软件的相关问题,着重探讨了对该软件的改进措施.     

红外光通信装置的设计与实现

介绍2013年大学生电子设计竞赛F题红外光通信装置的设计与实现。整个系统采用两个LM567（PLL）音频锁相环集成电路来完成红外光通信,性价比高,结构简单。     

面向安全的轮流中继选择方案

针对多中继轮流中继系统被窃听的问题,提出面向安全的轮流中继选择方案。首先提出了遍历的最优中继选择方案,并推导得到了保密速率的理论值;之后为降低复杂度,分别从降低计算复杂度和信道估计开销的角度设计了两种两阶段的次优中继选择方案,先缩小中继选择范围再进行搜索。仿真结果表明K-最大主信道中继选择方案能够以较低的复杂度实现最优保密速率。     

基于Qt4/VS2010平台的自动测试系统

主要研究Qt4和Microsoft Visual Studio 2010作为平台的自动测试工具的开发,分析软件需求和实现方法.针对测试软件所涉及的数据处理流程,详细介绍了实现方法和步骤,并对不同的功能模块加以分析,完成软件设计和开发,最终实现了提出的自动化测试的需求.     

基于ARM的电磁继电器参数检测仪

针对目前市场上存在的一些电磁继电器参数检测仪器的缺点,为了能够精确采集电磁继电器的吸合电压等主要参数,采用ARM技术和上、下位机方法,设计了一款基于ARMCortex—M3芯片sTM32F103ZET6单片机控制的电磁继电器综合参数检测仪。该仪器可完成对动断、动合、转换型直流继电器的线圈电阻、触点接触电阻、最小吸合电压、最大释放电压、吸合时间、释放时间等参数的测试。