中性点不接地电力系统异地两相短路故障的案例分析

在中性点不接地电力系统继电保护的整定和接地线校验热稳定分析等工作中,需要对复杂的异地两相接地短路电流进行计算,现有算法求解困难.通过分拆系统零序阻抗,将异地两相接地短路电流计算化简为2个单相接地短路电流计算,对35kV系统的异地两相接地短路事故实际案例进行分析,验证了该算法,并给出供电线路继电保护整定的改进建议.     

Optimal cooperative beamforming design schemes  for AF MOMO two way relay channels

In this paper,beamforming parameters in multiple input multiple output (MIMO) two-way relay channels (TWRCs) are designed.We investigate three communicating scenarios,in which,the source nodes are all ...     

MSMSE-based optimal beamforming design and simplification on AF MIMO two-way relay channels

An optimal cooperative beamforming for the amplify-and-forward (AF) MIMO two-way relay channels was designed. Supposing the channel state information (CSI) was perfectly known by the receiver and transmitter as well as the relay, optimal beamforming vectors (matrices) of all nodes were jointly designed based on the criterion of minimizing the sum mean square errors (MSMSE). The analysis result shows that the performance effect of transmitting and receiving beamforming pairs is to maximize the receive signal-to-noise ratio (SNR) at two communication nodes, and the rank of the optimal relay beamforming matrix is no larger than two when there is only one data stream at each source node. A simplified algorithm was put forward to accomplish the design based on the analysis conclusions. Simulation results provide that the system performance, which is characterized in terms of bit error rates (BER), is significantly improved by cooperative beamforming, and the performance of the simplified method is not only very close to the optimal one but also with faster iteration speed and much lower computational complexity.     

基于目标对象的最佳中继协作频谱感知方案

提出了一种基于目标对象的最佳中继协作频谱感知方案(Pe-BRCS),通过最小化报告信道上的错误传输概率为目标选择最佳中继,以提高感知性能;为了降低计算复杂度,进一步提出了简化的最佳中继,协作频谱感知方案(simplified_BRCS)。仿真结果表明:相比传统SINR-BRCS方案,Pe_BRCS方案有效降低了报告信道上的错误传输概率,可以在增加较少计算复杂度的条件下提高感知性能;simplified_BRCS方案可以在不增加复杂度的情况下很好地近似Pe_BRCS方案。     

基于横向一体化的继电保护整定计算系统研究

继电保护定值整定计算及定值管理是继电保护专业的核心业务。文章提出了横向一体化整定计算系统的概念,介绍了其设计思想、整体结构和各模块的功能,并重点分析了系统与定值单流转系统的数据交互方案。本系统能够实现整定计算的"横向集成",在整体架构和部署方面打破了传统软件单机版应用的局限性,实现了全网统一建模及各系统之间的信息共享。     

连续复小波变换在智能变电站故障录波仿真系统中的应用

对智能变电站二次系统通信过程进行模拟,即IEC 61850采样值报文和GOOSE报文进行捕获和发送,实现智能变电站故障录波仿真;在此基础上,采用连续复小波变换的波形分析算法提取基波向量,克服了系统频率波动对故障特征量计算的影响,进而模拟保护动作行为和重合闸过程,为智能变电站二次系统的原理和操作的研究及培训提供技术手段.     

大型水电站继电保护信息管理系统子站的实现

对龙滩水电站继电保护信息管理系统子站的实施进行了介绍,完成子站系统网络结构设计、保护设备接入、设备建模以及子站部分高级应用功能开发等,并对工程建设过程中遇到的一些实际问题进行了探讨。     

模拟小信号电子式互感器现场应用抗干扰分析

电子式互感器是智能变电站技术的热点和难点,其中小信号模拟输出的罗氏线圈或LPCT方案的抗干扰问题一直困扰着设备研发和现场应用。文章针对某110kV变电站在拉合10kV电容器组时的主变保护动作问题,试验分析了低压侧LPCT接入保护装置的回路,发现现有关于小信号互感器和二次设备配合的相关电磁兼容标准还不够完善,但保护装置不应因为输入信号幅度的减小而降低隔离和抗共模干扰的要求。同时,由于模拟小信号互感器的额定输出很小,开关柜处的场干扰也成为影响信号质量的重要因素,现场应用时必须采用屏蔽双绞线传输并有效接地。另外,由于增量差动保护对小信号互感器的短时干扰波形敏感,建议在110kV主变保护中不要采用。鉴于现阶段模拟小信号电子互感器应用中的这些问题,应进行更多的试点研究后方能在智能变电站建设中大面积推广。     

Rate-compatible network LDPC codes

A rate-compatible puncturing algorithm for network LDPC codes is proposed to achieve the minimum error probability, and decoding error probability is derived. The algorithm for finding variable nodes to be deleted based on the tanner graph of network LDPC codes is proposed, which is aimed at minimizing the decoding error probability and optimizing the puncturing pattern. Simulation results illustrate that, at BER=10^-4, the proposed rate-compatible network LDPC codes have a coding gain of about 0.4dB compared with the codes obtained via the existing punctured methods.     

中继网络中快速接入与路由选择策略与方法

为了在低复杂度、小系统开销与时延下实现中继网络中快速接入与路由选择,提出了一种基于接入及路由选择指示器(Access and Routing Indicator,ARI)的快速接入及路由选择方法,使用QoS优先级对业务进行了分类,在准公平的条件下,实现了业务的分级处理,固定间隔累积平均的方式测量,采用累积平均的方式,在确保中继无线通信网络的通信质量的同时,充分考虑到中继无线通信网络中多路由及控制信道和业务信道的质量需求的差异,尽可能的重新使用无线通信网络中的各种资源,降低系统开销与时延。