Decentralized energy supply: Suitability for the UK's industrial sectors

From the results reported here it is suggested that policy decisions about the potential contribution of decentralized energy supply systems to UK industrial energy requirements should be based on the suitability of individual sectors rather than averaged over all sectors. The suitability of decentralized energy sources is evaluated, based on a themodynamic match between source and demand. This suitability criterion is used to identify the most appropriate sector in manufacturing industries for the adoption of decentralized energy supply, leaving aside economic cost considerations and individual site requirements.     

吉林省中部地区水资源配置初探

中部地区水资源总量为39.61亿m3。城市用水与农业、生态用水矛盾突出,城市供水能力不足,水污染问题严重,地下水超采严重,水资源开发利用不协调。该区水资源已无进一步开发利用的潜力,需通过调水工程解决缺水问题。水资源配置思路为从地处松花江上游的丰满水库引水,增加供水能力。     

Testing viability of cross subsidy using time-variant price elasticities of industrial demand for electricity: Indian experience

Indian electric tariffs are characterized by very high rates for industrial and commercial classes to permit subsidized electric consumption by residential and agricultural customers. We investigate the viability of this policy using monthly data for 1997–2003 on electric consumption by a few large industrial customers under the aegis of a small distribution company in the state of Uttar Pradesh. For a given price/cost ratio, it can be shown that if the cross-subsidizing class’ electricity demand is sufficiently elastic, increasing the class’ rates fail to recover incremental cross-subsidy necessary to support additional revenues for subsidized classes. This suboptimality is tested by individually estimating time-variant price-elasticities of demand for these industrial customers using Box-Cox and linear regressions. We find that at least for some of these customers, cross-subsidy was suboptimal prior to as late as October 2001, when rates were changed following reforms.     

碳酸二甲酯的市场需求和生产技术进展

介绍了碳酸二甲酯的价格、生产情况及国内外市场需求 ,指出碳酸二甲酯在我国具有极大的市场潜力。综述了生产碳酸二甲酯的三类主要方法 ,介绍了光气法、酯交换法和氧化羰基化法的各种具体方法及尚未实现工业化仍在研究中的其他方法。并对各种工业化的生产方法从技术、经济和清洁性的角度进行了分析 ,指出适合我国采用的工业合成方法是气相氧化羰基化法和甲醇与 CO2 直接合成法     

一机多控视频点播系统

介绍一种自行设计、开发的一机多控视频点播系统，讲述了系统组成及设计方案，它具有服务功能多，操作方便、性能价格比高等特点。     

小麦、玉米控制灌溉技术研究

198 6～ 1998年 ,在山东省的 3个灌溉试验站 ,对冬小麦、秋玉米进行了控制灌溉试验 ,对农作物的多个生育阶段 ,按高产的要求 ,分别给予适时、适量的灌溉水 ,来控制作物不同生长期的根层土壤含水量 ,从而控制作物不同生长期根系对水分的吸收 ,培植农作物的“丰产群体结构”和与之相适应的“高产理想株型” ,适当降低无效的蒸腾量 ,使农作物能在高产的基础上再增产 .该项控制灌溉技术获得了明显的节水、增产效果 ,灌溉水的生产效率超过了 10kg/m3,产量超过了 8t/hm2 .     

低渗透油藏超短周期间歇注水方式研究

大港油田南区低渗透油藏两相共渗区窄，注水开发短期内含水上升迅速，根据间歇注水理论，并借鉴国内外油田的实验经验，1998年在舍女寺油田女20、女34区块开展超短周期（周期0．5－5d)间歇注水试验。总结不同注水周期和频率及油并不同含水级别对其效果的影响。认为超短周期间歇注水可改善油层动用状况，对中、低含水受益油井之注水井有较好的适用性，为低渗透油藏注水开发提出了一种经济有效的方法。图1参（王学立摘）。     

2006:积极推进结构调整着力扩大消费需求

2005年,我国经济呈现高位平稳增长的特征,各项经济指标总体上继续向好.与此同时,经济运行中也出现了一些新情况、新问题,需要引起足够的重视.2006年,针对部分生产资料行业产能过剩等突出问题,应积极推进产业结构调整,促进经济增长方式转变.同时,应将扩大消费需求作为宏观政策的主要着力点.     

Bridge design with reserve and residual reliability constraints

System reliability is evolving as an important design method for selecting components and topology. It should be used to investigate the original intact structure behavior as well as providing sufficient reserve capacity under likely accident and damage scenarios. Highway bridges are an area of special concern since effort to optimize the cost of construction may not provide adequate redundant capacity. The paper describes an example in which a typical girder bridge structure is optimized (both size and girder spacing) to achieve target system performance. System reliability constraints are imposed on the behavior of the intact structure under highway loads. Also, residual system reliability constraints are imposed to control safety under specified accident scenarios corresponding to damage and “lost” members due to corrosion, fatigue, fire or accidental collisions. An optimal design framework for controlling safety under all these life cycle situations is thus provided.     

从数字看发展片式电容器面临的机遇与挑战

采用海关进、出口统计和行业生产统计资料,通过计算、分析,用数字来说明国内发展片式多层陶瓷电容器、片式钽电解电容器、片式铝电解电容器、片式有机薄膜电容器所面临的机遇与挑战,并对其国内市场需求总量、额,国产品在国内市场占有率等做出评估,为有关单位了解片式电容器的发展提供参考,为国产产品更有效地进入国内市场、促进其发展提供依据。