Adhesion and Hydrolytic Stability of the Interface Between High-Modulus Polyethylene Fibers and Acrylic Resins

The effects of oxyen plasma treatment on the surface chemistry of Spectra 1000® high modulus polyethylene fibers and on the mechanical properties of fiber-reinforced composites of the fibers in a Bis-GMA based acrylic resin have been studied. X-ray photoelectron spectroscopy and diffuse reflectance FTIR spectroscopy have been used to show that the majority of oxygen on the fiber surface exists mostly in the form of ether and/or epoxy linkages, with carbonyl-, carboxylic- and ester-containing compounds accounting for less than 10 percent of the total. While the untreated and plasma-treated fibers have similar chemical compositions, the surfaces of the plasma-treated fibers are more polar and the oxygen is chemically bonded instead of being merely physisorbed. The interfacial shear strength between the fibers and the acrylic resin is increased by a factor of 2.3 by the plasma treatment indicating the presence of a weak boundary layer on the surface of the untreated fibers. The hydrolytic stability of the composite interfaces was investigated for fibers sized with several Bis-GMA-based adhesives. Maximum stability was attained by sizing with Bis-GMA containing a peroxide catalyst or an amine accelerator. The flexural properties of composites utilizing plasma-treated and untreated fibers were compared in three-point bending. The ultimate bending loads for composites using treated fibers were much higher than those for composites with untreated fibers, but only a fraction of that for glass or Kevlar®-reinforced materials.     

强酸性阳离子交换树脂催化合成氯乙酸异辛酯的研究

对采用７３２强酸性苯乙烯系阳离子交换树脂作催化剂合成氯乙酸异辛酯进行了实验研究，提出了适宜的反应条件。实验结果表明，该法酯化率高、过程简便、产物颜色浅，优于浓硫酸作催化剂。     

聚丙烯酸钾与腐植酸复合高吸水性树脂的合成研究

以腐植酸与丙烯酸聚合制备了高吸水性树脂,讨论了交联剂、引发剂以及KOH用量对聚丙烯酸与腐植酸高吸水性树脂吸水率的影响,结果显示在n(MBA)∶n(AA)=0.0005、n(KPS)∶n(AA)=0.0075、n(KOH)∶n(AA)约为0.70、温度为80℃的条件下合成时,其吸水倍率可达到最优值。而且在接近自然条件下(35℃)失水速度慢,保水时间可达100 h以上,重复吸水性能好。运用红外光谱分析了腐植酸与丙烯酸的反应机理。     

聚氯乙烯中杂质粒子的产生原因及解决措施

通过分析聚氯乙烯树脂中杂质粒子产生的主要原因，提出了在采购、保管、生产、清理、分析等环节的解决措施。     

我国合成树脂的展望

综述了我国“八五”期间合成树脂LDPE、LLDPE、HDPE、PP、PS、ABS以及工程塑料PA、POM、PC、PET、PBT、PTFE、PSF、PPO、MPPO、PPS的发展情况,并介绍了新建合成树脂装置及其生产能力。     

PMMA‐modified divinylester/styrene resins: Phase diagrams and morphologies

Binary and ternary experimental cloud‐point curves (CPCs) for systems formulated with a low molar mass synthesized divinylester (DVE) resin, styrene (St), and poly(methyl methacrylate) (PMMA) were determined. The CPCs results were analyzed with the Flory–Huggins (F‐H) thermodynamic model taking into account the polydispersity of the DVE and PMMA components, to calculate the different binary interaction parameters and their temperature dependences. The St‐DVE system is miscible in all the composition range and down to the crystallization temperature of the St; therefore, the interaction parameter expression reported for a higher molar mass DVE was adapted. The interaction parameters obtained were used to calculate the phase diagrams of the St‐PMMA and the DVE‐PMMA binary systems and that of the St‐DVE‐PMMA ternary system at three different temperatures. Quasiternary phase diagrams show liquid–liquid partial miscibility of the St‐PMMA and DVE‐PMMA pairs. At room temperature, the St‐DVE‐PMMA system is miscible at all compositions. Final morphologies of PMMA‐modified cured St‐DVE materials were generated by polymerization‐induced phase separation (PIPS) mechanism from initial homogeneous mixtures. SEM and TEM micrographs were obtained to analyze the generated final morphologies, which showed a direct correlation with the initial miscibility of the system. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4539–4549, 2006     

PVC树脂中杂质粒子的来源及消除方法

系统地分析了PVC树脂中杂质粒子的来源和产生原因，提出了解决的方法。杂质粒子与所用原材料、设备、工艺、聚合配方组分及氯乙烯单体中的铁化合物有关。在配方中全用聚乙烯醇做悬浮剂时由于反应前后浓度变化大而容易产生自聚物和粘釜物而增加杂质粒子，加入少量纤雏素可稳定悬浮剂浓度。单体含酸含水所产生的铁锈与氯化铁形成有色胶状物是杂质粒子的重要来源，采用在合成工段滴加碱溶液的方法消除酸和氯化铁，避免胶状物的产生。     

混合催化剂合成水性环氧丙烯酸酯的研究

通过环氧丙烯酸树脂和双羟基化合物反应,获得具有亲水性链段的水性环氧丙烯酸酯。研究了催化剂用量和反应温度对转化率的影响,确定了以混合催化剂的最佳反应条件。采用FT-IR红外光谱对所合成的数值进行了表征,实验结果表明可以获得目的产物。     

纳米有机蒙脱土改性邻甲酚醛环氧树脂的研究

利用插层复合技术制备了邻甲酚醛环氧树脂／蒙脱土纳米复合材料，对固化产物利用X射线衍射(XRD)分析有机蒙脱土的层间距变化。通过对复合材料的力学性能测试表明，少量有机化蒙脱土的加入可以较大地提高材料的拉伸强度和冲击强度，起到了同时增韧增强的作用。并且环氧树脂／蒙脱土复合材料的热分解温度和热变形温度也有明显提高。     

炭黑－环氧树脂导电复合材料的研究

本文研究了炭黑－环氧树脂复合材料的制备工艺及炭黑填充率对材料电阻率的影响。实验结果表明，加入表面活性剂，明显改善了炭黑在环氧树脂中分布的均匀性。炭黑－环氧树脂材料具有明显的渗流效应，正温度系数效应即ＰＴＣ效应，非线性伏安特性和电磁波屏蔽效应。