Numerical analysis on Joule heating of double-loop channel induction furnaces

In order to investigate Joule heating power, a three-dimensional finite element model (FEM) was developed to predict Joule heating power in the channels of double-loop inductor. The simulated results were compared with experimental data from low load trials for a 400 kW inductor. The results, such as power factor and Joule heating power, show reasonable correlation with experimental data, and Joule heating rate reaches the maximum at the corners and the minimum at the centre of the cross-section area. With increasing relative permeability of iron core, length of coils, current frequency and resistivity of metal melt, the power factor and Joule heating power change. It is concluded that current frequency, the resistivity and length of the coil play a critical role in determining the power factor and Joule heating power, whereas relative permeability of the magnetic core shows no significant influence on them.     

Carburization of ferrochromium metals in chromium ore fines containing coal during voluminal reduction by microwave heating

Chromium ore fines containing coal (COFCC) can be rapidly heated by microwave to conduct the voluminal reduction, which lays a foundation of getting sponge ferrochromium powders with a lower content of C. Under the conditions of COFCC with n(O):n(C) (molar ratio) as 1.00:0.84 and n(SiO₂):n(CaO) as 1.00:0.39, the samples were heated by 10 kW microwave power to reach the given temperatures and held for different times respectively. The results show that the low-C-Cr ferrochromium metal phase in the reduced materials forms before the high-C-Cr ferrochromium metal phase does. With increasing temperature the C content of ferrochromium metals is in a positive correlation with the content of Cr. The C content of ferrochromium metal in reduced materials is 0–10.07% with an average value of 4.68%. With the increase of holding time the Cr content in ferrochromium metals is in a negative correlation with the content of C, while the content of Fe changes in the contrary way. In the microwave field the kinetic conditions of carburization are closely related with the temperature of microwave heating, holding time and carbon fitting ratio. Foundation item: Project(50474083) supported by the National Natural Science Foundation of China; Project supported by the Baoshan Iron & Steel Co. Ltd. of China     

HP nonlinear guidance law design based on smooth sliding mode control

To eliminate the perturbation of interceptor detection induced by aerodynamic heating,the head pursuit (HP) guidance law for three-dimensional interception was presented. The guidance law positioned the interceptor ahead of the target on its flight trajectory,and the speed of interceptor was required to be lower than that of the target. On the basis of a novel head pursuit three-dimensional guidance model,a nonlinear guidance law was developed based on smooth sliding mode control theory. At the same time,a special observer was designed to estimate the target acceleration,and a numerical example on maneuvering ballistic target interception verified the effectiveness of the presented guidance law.     

高等院校供暖系统常见问题及节能优化研究

高等院校供暖系统常见问题主要表现在水平衡失调、循环水泵控制方式不合理、缺乏实时监测和调控等方面,针对这些问题应采取分时分区供暖、循环水泵变频控制、实时监控温度补偿等手段,实现校园供暖系统的节能优化运行.     

不可逆空气热泵循环供热率密度优化

基于有限时间热力学理论,以供热率密度作为热力学优化目标,分析了恒温热源不可逆空气热泵循环的性能,导出了供热率密度与压比和换热器有效度等参数间的解析关系式,并由数值计算分析了热源温比、总热导率及压缩机和膨胀机效率等对热导率最优分配及供热率密度最优性能的影响特点。     

长春市某高校间歇采暖节能潜力分析

针对学校建筑采暖负荷特点,采用能耗分析的方法分析研究采用间歇供暖的节能性.两种运行方式耗热量对比,建筑面积为10.6 W㎡的学校建筑,采用间歇采暖运行方式可以节省能量2 913 734 kWh,相当于节约标准煤556t,并减少水泵耗电31 691 kWh,相当于节省原来用能的11.7%.由于采用间歇采暖的运行方式使用小流量供暖,不但节约了燃料消耗量,减少了污染物排放,而且也显著降低了运行费用,是一种较为理想的节能方法.     

硅基底上制备纳米镍粒子

采用微波加热法在单晶硅基底上制备纳米镍粒子。考察了镍源、还原剂、表面活性剂、加热方式等实验条件对单晶硅基底上制备纳米镍粒子的影响。对硅基底上纳米镍粒子的成分、结构及表面形态进行了表征。结果表明:以水合肼为还原剂、氯化镍为镍源,微波加热3 min在硅基底上可以制备出直径为30 nm的均匀单一分布的纳米镍粒子。     

学校类建筑分时供暖节能潜力分析

学校类建筑的使用具有明显的分时段性,采用分时供暖有很大的节能潜力,以天津某大学的一个教学楼为例,结合天津市典型年的气象参数,绘制了全天热负荷随时间变化图,将分时供暖与传统供暖全天所需热量作比较,分析了分时供暖的节能潜力．     

Incoherent scatter spectra due to HF heating in the low ionosphere region

The electron velocity distribution function and the incoherent scatter spectra during ionospheric heating in low ionosphere region are presented with consideration of the elastic collision between electrons and neural particles and the excitation of rotation energy level. The effects of pump frequency and electric fields on the spectra are discussed. With the increase of electric field, the non-Maxwellian feature is enhanced, and with the increase of heating frequency, the non-Maxwellian feature is weakened. The non-Maxwellian factor will bring a large error in ionosphere parameters, which must be considered in the inversion. Supported by the National Natural Science Foundation of China (Grant No. 40310223), the National Key Laboratory of Electromagnetic Environment (LEME), and National Key Technologies R&D Program of China (Grant No. 2006BAB18B06)     

分时控制MOSFET固态高频感应加热电源研究

研究了一种采用分时控制方法的MOSFET固态高频感应加热电源,电源输出频率是功率器件工作频率的n倍(采用n个桥分时工作)。利用MATLAB/SIMULINK实现了分时控制的仿真,分析了分时控制的工作状态,对器件功耗进行了理论推导,并对如何实现分时控制进行了介绍,且根据仿真画出了并行控制和分时控制2种控制方式下MOSFET器件损耗的曲线图。仿真结果表明分时控制在实现固态感应加热电源的高频化方面优于并行控制。