集中供热系统适量供热调节技术

集中供热的采暖用户实行计量收费并且具有自调节能力以后,必须要有与用户调节相匹配的运行调节手段,才能实现系统的适量供热.结合集中供热常用的系统形式,分别分析用户、热网及热源在各种运行方式下的调节特性及节能潜力,得出室内系统变流量、循环水泵变转速运行时节能量最高,并给出循环水泵定转速运行及变转速运行下的控制系统方框图.最后指出,应该针对新型供热系统和旧有供热系统的特点,制定相应的整体综合调节策略,才能实现节能最佳.     

小型加热炉炉温微机控制系统

针对小型试验反应器的特点,介绍了PID自整定、串级控制、采样调节、程序适应控制、程序升降温等多种控制策略在该种反应器温度控制上的应用。结果表明,反应器内温稳态温度控制精度高,升降温曲线能很好地跟踪开停工工艺条件,开停工简单方便,参数整定方便,适应性强,控制方式灵活,减轻了操作人员的劳动强度,提高了试验装置的自动化水平。     

Carburization of ferrochromium metals in chromium ore fines containing coal during voluminal reduction by microwave heating

Chromium ore fines containing coal (COFCC) can be rapidly heated by microwave to conduct the voluminal reduction, which lays a foundation of getting sponge ferrochromium powders with a lower content of C. Under the conditions of COFCC with n(O):n(C) (molar ratio) as 1.00:0.84 and n(SiO₂):n(CaO) as 1.00:0.39, the samples were heated by 10 kW microwave power to reach the given temperatures and held for different times respectively. The results show that the low-C-Cr ferrochromium metal phase in the reduced materials forms before the high-C-Cr ferrochromium metal phase does. With increasing temperature the C content of ferrochromium metals is in a positive correlation with the content of Cr. The C content of ferrochromium metal in reduced materials is 0–10.07% with an average value of 4.68%. With the increase of holding time the Cr content in ferrochromium metals is in a negative correlation with the content of C, while the content of Fe changes in the contrary way. In the microwave field the kinetic conditions of carburization are closely related with the temperature of microwave heating, holding time and carbon fitting ratio. Foundation item: Project(50474083) supported by the National Natural Science Foundation of China; Project supported by the Baoshan Iron & Steel Co. Ltd. of China     

HP nonlinear guidance law design based on smooth sliding mode control

To eliminate the perturbation of interceptor detection induced by aerodynamic heating,the head pursuit (HP) guidance law for three-dimensional interception was presented. The guidance law positioned the interceptor ahead of the target on its flight trajectory,and the speed of interceptor was required to be lower than that of the target. On the basis of a novel head pursuit three-dimensional guidance model,a nonlinear guidance law was developed based on smooth sliding mode control theory. At the same time,a special observer was designed to estimate the target acceleration,and a numerical example on maneuvering ballistic target interception verified the effectiveness of the presented guidance law.     

高等院校供暖系统常见问题及节能优化研究

高等院校供暖系统常见问题主要表现在水平衡失调、循环水泵控制方式不合理、缺乏实时监测和调控等方面,针对这些问题应采取分时分区供暖、循环水泵变频控制、实时监控温度补偿等手段,实现校园供暖系统的节能优化运行.     

不可逆空气热泵循环供热率密度优化

基于有限时间热力学理论,以供热率密度作为热力学优化目标,分析了恒温热源不可逆空气热泵循环的性能,导出了供热率密度与压比和换热器有效度等参数间的解析关系式,并由数值计算分析了热源温比、总热导率及压缩机和膨胀机效率等对热导率最优分配及供热率密度最优性能的影响特点。     

学校类建筑分时供暖节能潜力分析

学校类建筑的使用具有明显的分时段性,采用分时供暖有很大的节能潜力,以天津某大学的一个教学楼为例,结合天津市典型年的气象参数,绘制了全天热负荷随时间变化图,将分时供暖与传统供暖全天所需热量作比较,分析了分时供暖的节能潜力．     

Incoherent scatter spectra due to HF heating in the low ionosphere region

The electron velocity distribution function and the incoherent scatter spectra during ionospheric heating in low ionosphere region are presented with consideration of the elastic collision between electrons and neural particles and the excitation of rotation energy level. The effects of pump frequency and electric fields on the spectra are discussed. With the increase of electric field, the non-Maxwellian feature is enhanced, and with the increase of heating frequency, the non-Maxwellian feature is weakened. The non-Maxwellian factor will bring a large error in ionosphere parameters, which must be considered in the inversion. Supported by the National Natural Science Foundation of China (Grant No. 40310223), the National Key Laboratory of Electromagnetic Environment (LEME), and National Key Technologies R&D Program of China (Grant No. 2006BAB18B06)     

分时控制MOSFET固态高频感应加热电源研究

研究了一种采用分时控制方法的MOSFET固态高频感应加热电源,电源输出频率是功率器件工作频率的n倍(采用n个桥分时工作)。利用MATLAB/SIMULINK实现了分时控制的仿真,分析了分时控制的工作状态,对器件功耗进行了理论推导,并对如何实现分时控制进行了介绍,且根据仿真画出了并行控制和分时控制2种控制方式下MOSFET器件损耗的曲线图。仿真结果表明分时控制在实现固态感应加热电源的高频化方面优于并行控制。     

底部局部辐射加热窑炉内温度场数值模拟

提出了底部局部辐射加窑炉内温度场数值分析的控制方程组，分别对平面加热及半圆柱形加热面两种算例进行了数值计算，得了影响烤花烤窑炉内温度场均匀性的主要因素和有加热面发射率，加热面形状，加热面相对位置及窑炉墙体热阻和墙体与外界的换热热阻。