光激励和光检测微型硅谐振器研究

分析了光激励谐振器振动的检测问题，用调制激光束激励谐振器使其发生振动，并采用光学干涉的方法测量了这种微振动。     

单模光纤的传输衰减随温度变化的研究

本文从实验上测量了单模石英光纤在－50～120℃范围内的损耗。随着温度升高，光纤的损耗随之降低，在常温附近达到最小。其后损耗随着温度的继续升高而增加。损耗的变化主要是由于杂质的吸收和微弯损耗。本文对杂质的吸收以及微弯损耗进行了数值模拟，并且从理论上定性地解释了损耗对温度的依赖关系。     

Fast‐scale bifurcation in power‐factor‐correction buck‐boost converters and effects of incompatible periodicities

In this paper, we derive the discrete‐time model for the power‐factor‐correction (PFC) buck‐boost converter in terms of a stroboscopic switching map. Fast‐scale instability is analysed through a fold diagram, which exposes the periodicity of the operation as well as the locations of the critical phase angles of the line voltage at which instability begins to occur along a half‐line cycle. The asymmetrical locations of the critical phase angles along a half‐line cycle is explained in terms of ‘under‐developed’ bifurcation. Border collision bifurcations are observed and analysed in detail. Copyright © 2006 John Wiley & Sons, Ltd.     

A novel method of suppressing the inrush current of transformers by using a series‐connected voltage‐source PWM converter

This paper proposes a novel method of suppressing the inrush current of transformers. A small‐rated voltage‐source PWM converter is connected in series to the transformers through a matching transformer. As the connected PWM converter serves as a resistor for the source current, no inrush phenomena occurs. The required rating of the PWM converter, which serves as the damping resistor for the inrush phenomena, is 1/400 that of the main transformers in single‐phase circuits. In three‐phase circuits, it is 1/900. The basic principle of the proposed method is discussed. Digital computer simulation is implemented to confirm the validity and excellent practicability of the proposed method using the PSCAD/EMTDC. A prototype experimental model is constructed and tested. The experimental results demonstrate that the proposed method can perfectly suppress the inrush phenomena. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 157(4): 56–65, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20174     

A novel robust current control approach using adaptive line enhancer for three‐phase current‐source active power filter

An effective system control method is presented for applying a three‐phase current‐source PWM converter with a deadbeat controller to active power filters (APFs). In the shunt‐type configuration, the APF is controlled such that the current drawn by the APF from the utility is equal to the current harmonics and reactive current required for the load. To attain the time‐optimal response of the APF supply current, a two‐dimensional deadbeat control scheme is applied to APF current control. Furthermore, in order to cancel both the delay in the two‐dimensional deadbeat control scheme and the delay in DSP control strategy, an Adaptive Line Enhancer (ALE) is introduced in order to predict the desired value three sampling periods ahead. ALE has another function of bringing robustness to the deadbeat control system. Due to the ALE, settling time is made short in a transient state. On the other hand, total harmonic distortion (THD) of source currents can be minimized compared to the case where ideal identification of the controlled system can be made. The experimental results obtained from the DSP‐based APF are also reported. The compensating ability of this APF is very high in accuracy and responsiveness although the modulation frequency is rather low. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(1): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20014     

高性能小型扫描器

本文讨论了一种高性能小型扫描器的基本原理及扫描时序变换。对采用该小型扫描器的热成像系统也作了详细的介绍。该小型扫描器可满足多种用途。     

攀钢转炉炼钢用碳化硅提温的试验研究

低品位碳化硅是转炉炼钢的有效提高温剂。工业性试验结果表明，碳化硅加入８．０ｋｇ／ｔ钢水提温４０．３－７０．３℃（平均４８．４℃）；渣中ＴＦｅ降低１．３％；加提温剂有利于转炉内造渣脱硫和碱少炉渣对耐火砖的侵蚀。文中还给出了攀钢转炉半钢冶炼铸用钢不水时加与不加碳化硅的ｔλ，［Ｃ］λ区域。     

Modeling of a power electronic converter for EMC in the conduction emission frequency band

With the advancement of high‐frequency switching devices, electromagnetic interferences (EMI) have become problems in power electronic converter designs. It is necessary for an electromagnetic compatibility (EMC) design to prospect and consider its possible EMI levels. This paper describes how to compute effects from a power converter to an object point to reduce conduction EMI noises effectively by an appropriate design. Modeling techniques for converter elements are discussed for a model in the conduction emission frequency band by the parameter tuning method and for line constants by an analytical derivation. Then a derived model is simulated for harmonic distributions of loop currents and their magnetic fields. © 2002 Scripta Technica, Electr Eng Jpn, 139(1): 44–50, 2002: DOI 10.1002/eej.1145     

静电驱动悬臂梁数模转换器设计、分析与模拟

提出了一种新型的微电子机械数模转换器 (MEMDAC)———静电驱动悬臂梁数模转换器 .与传统的静电驱动悬臂梁执行器相比 ,新的结构能更精确地控制梁的挠度 .文中给出了此MEMDAC的设计、分析和模拟过程 .有限元(FEA)分析表明此MEMDAC的最大输出位移为 1 5 1μm ,分辨率为 0 1μm ,其最大非线性误差为 0 0 3μm .     

压阻式硅微加速度传感器的结构设计与仿真

一般的压阻式硅微加速度传感器结构多采用单梁加质量块的形式,这种形式的传感器灵敏度比较高,但它的横向效应较难克服,文中提出一种四梁结构的加速度传感器,通过仿真计算,说明该结构的加速度传感器具有良好的综合特性.