高压带电体温度检测装置

针对传统高压带电体测温方法存在的难以实现电气绝缘、精度低等问题,介绍了一种新型高压带电体温度检测装置的设计方案。该装置采用传统接触式测温方式下的温度传感器采集温度信号,采用可调电流源+感生电源方式实现供电,各感生电源与可调电流源通过高压线连接,不同测温点的感生电源之间没有电气连接,且采用光纤传输温度信号,从而很好地实现了电气绝缘。实验结果表明,该装置的感生电源电压稳定,测温精度高,抗干扰能力强。     

用简化的Goertzel来实现正弦基波与谐波

通过对Goertzel算法的优化和运用查表法处理来加快其运算速度。在硬件电路的基础上,用C语言完成了实际应用的算法程序。采用Atmel公司51系列外接晶振时钟频率可高达24MHz的单片机AT89C2051-24SU,运算后输出了一定频率的正弦基波及其多次谐波组成的波形。     

On the multi‐input second‐order sliding mode control of nonlinear uncertain systems

This note addresses the multi‐input second‐order sliding mode control design for a class of nonlinear multivariable uncertain dynamics. Among the most important peculiarities of the considered control problem, the considered sliding vector variable has a uniform vector relative degree [2,2, … ,2] with respect to the vector control variable, and only the sign of the sliding vector and of its derivative are available for feedback. Additionally, the symmetric part of the state‐dependent control matrix is supposed to be positive definite. Under some further mild restrictions on the uncertain system's dynamics, a control algorithm that realizes a multi‐input version of the ‘twisting’ second‐order sliding mode control algorithm is suggested. Simple controller tuning conditions are derived by means of a constructive Lyapunov analysis, which demonstrates that the suggested control algorithm guarantees the semiglobal asymptotic convergence to the sliding manifold. Simulation results, which confirm the good performance of the proposed scheme and investigate the actual accuracy obtained under the discrete‐time implementation effects, are given. Copyright © 2011 John Wiley & Sons, Ltd.     

Citations do not solve problems.

D. T. Cambell and D. W. Fiske (1959) made the now-obvious statement that measures of the same variable made by different methods should agree (converge) and certainly should agree better than measures of different variables made by those several methods. Almost everyone accepted that statement, yet the multitrait–multimethod matrices published today show little or no improvement over the published examples cited in 1959. The article raised the conceptual problem of how a variable and its measurement should be linked and the methodological problem of clarifying the nature of methods and their effects. Given these unresolved problems, it is perhaps not surprising that the question of the appropriate statistical analysis of these matrices has also no consensual answer. Perhaps methods and traits or contents are so thoroughly intertwined that their interaction cannot be adequately analyzed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

云计算的现状与发展趋势

云计算作为一个全新的概念产业日益受到世界各国政府和企业界的重视。全社会不仅对它投入了巨大的关注,更为了它的快速发展投入了大量的人、财、物。云计算带来的计算机应用方式的革命被业内专家寄于厚望,更有人将其称为继信息技术革命之后的第四次工业革命。文章对云计算在目前的发展状况进行了简要概括;重点对云计算目前发展阶段存在的各种瓶颈问题进行了归纳总结,对其成因进行了剖析;对云计算今后的发展、应用趋势进行了展望。     

基于环探头测量含运动导体的瞬态电流波形

电流除了用罗果夫斯基线圈进行测量外,还可通过环探头测量电流产生的磁场来计算得到。直线电机除了位置固定的母线导体外,还有沿母线运动的电枢;母线回路注入脉冲电流后,电枢会被加速而运动。简化母线和电枢为线电流模型,在长线模型基础上,通过环探头测量得到的磁场计算出近似电流波形。因为探头所测磁场主要由其附近电流所贡献,所以合理配置电枢起始位置与探头位置后,电枢运动对电流测量的影响很小。在瞬态电流上升沿、平台区和下降沿的不同阶段,利用实验折算的系数,可得到时域瞬态电流波形,其测量结果与用罗果夫斯基线圈测量波形一致。     

Overview of Tiber-II—Evolution toward an Engineering Test Reactor

TIBER II is designed to be a minimum size and cost candidate for an international Engineering Test Reactor. High-current density Nb₃Sn superconducting magnets with radiation-tolerant polymide insulation is combined with a minimum thickness tungsten inbored shield and a common, external vacuum boundary to minimize the inner radial build of the tokamak core. This results in a major radius of 3 m, compared to 5 m for previous ETR designs such as INTOR, with correspondingly lower costs expected. Cyclic stress fatigue limits the number of pulses so that steady-state current drive, based on a combination of neutral beams, lower hybrid and ECH, is designed to achieve reactor-relevant nuclear testing conditions (Fluence 3MW yr/m², rwall > 1 MW/m² in steady state).This report is abstracted from a more complete information document UCID-20863 with numerous authors. See Ref. l for complete credits.     

90W-7Ni-3Fe纳米晶粉末的瞬时液相强化烧结特征

采用机械合金化(MA)制备了晶粒尺寸为8～18 nm的90W-7Ni-3Fe纳米晶粉末(MA粉末).将粉末注射成形,在1 480～1 500℃经3～5 min瞬时液相烧结.结果表明,采用瞬时液相强化烧结可以得到W晶粒为3～8 μm近全致密的细晶钨合金,显微组织为细小的球形W晶粒均匀地连续分布在纤维状粘结相中,烧结坯具有好的拉抻性能.长时间的传统液相烧结使球状W晶粒迅速粗化,而且密度和强度下降,但延伸率反而增加.在MA粉末中添加微量Y2O3后采用瞬时液相烧结,可以使合金抗拉强度提高到1 055 MPa,延伸率提高到16.5%.     

Continuous electromagnetic separation of inclusion from aluminum melt using alternating current

A novel scheme about the continuous electromagnetic purification of aluminum melt was put forward based on the utilization of a square separation pipe and a 50 Hz alternating current to produce electromagnetic force. It is experimentally found that with electrical current of 400 A/cm^2, it takes only 10 s to remove 95% inclusion from aluminum melt. Comprehensive numerical simulations were carried out to investigate the dynamics mechanisms behind the process. The results show that the removal of inclusion is attributed to the cooperative effects of electromagnetic buoyancy and the secondary flow induced by the rotational electromagnetic force, and the removal efficient increases with the size of inclusion and the electrical current imposed. Theoretical predictions on the distribution and removal efficiency of inclusion were supported by the experiments.     

电力电子设备谐波对配电网电压骤升的影响研究

分析了相关电力电子设备的结构特性、谐波产生原因与叠加机理,探讨了电力电子设备在配电网中谐波注入并引起配电网用户电压骤升的原因,构建了谐波对配电网电压影响的仿真模型;在配电网现场测量了多台电力电子设备的实际谐波含量,并以这些测量数据和实际农村低压配电网、IEEE 33节点中压配电网算例为基础,通过多个运行场景进行仿真对比,对用户电压大幅提升现象进行了验证,最后提出了治理这类电压骤升的措施。