Parametric synthesis of pulsar time

A new method of generating pulsar time based on a coherent representation of a sequence of observed events is considered. The properties of pulsar time compared with the traditional approach are analyzed. __________ Translated from Izmeritel’naya Tekhnika, No. 6, pp. 39–44, June, 2006.     

Micro- and nano-scale deformation behavior of nylon 66-based binary and ternary nanocomposites

The primary aim of this paper is to provide an insight on the effect of the location of organoclay on the micro- and nano-scale deformation processes in melt-compounded nylon 66/organoclay/SEBS-g-MA ternary nanocomposites prepared by different blending sequences. In addition, the deformation processes of the ternary nanocomposites were compared to the binary nanocomposites (nylon 66/organoclay and nylon 66/SEBS-g-MA) and neat nylon 66. The incorporation of SEBS-g-MA particles toughened nylon 66 markedly; but the flexural modulus and strength were both reduced. Conversely, the use of organoclay increased the modulus but decreased the fracture toughness of nylon 66. Nylon 66/SEBS-g-MA/organoclay ternary nanocomposites exhibited balanced elastic stiffness and toughness. Stress-whitening studies of the fracture surfaces in terms of gray level were also performed and an attempt was made to correlate the optical reflectivity characteristics with fracture toughness. It was concluded that the capability of SEBS-g-MA particles to cavitate was decreased by the presence of organoclay in the SEBS-g-MA phase, resulting in reduced toughening efficiency. The best micro-structure for toughness and other mechanical properties is thus to maximize the amount of exfoliated organoclay in the nylon 66 matrix rather than to have it embedded in the finely dispersed SEBS-g-MA particles.     

DS-SS通信扩频序列的估计

该文给出一种在各通信参数未知的情况下估计出DS-SS通信中伪随机码的方法,并对这一算法进行了仿真及性能分析。     

Software release management for component‐based software

Software release management is the process through which software is made available to and obtained by its users. Until now, this process has been relatively straightforward. However, the emergence of component‐based software is complicating software release management. Increasingly, software is constructed via the assembly of pre‐existing, independently produced, and independently released components. Both developers and users of such software are affected by these complications. Developers need to accurately document the complex and changing dependencies among the components constituting the software. Users must be involved in locating, retrieving, and assembling components in order to appropriately bring the software into their particular environment. In this paper, we introduce the problem of release management for component‐based software and discuss SRM, a prototype software release management tool we have developed that supports both developers and users in the software release management process. Copyright © 2002 John Wiley & Sons, Ltd.     

一种新型的三相异步电动机保护电路设计介绍

文章介绍了三相异步电动机电源的相序接反,断相,三相电压不平衡的故障监测保护电路的电路结构及工作原理。     

两个更一般的求极限公式

推广了文献[1～3]的结果，给出了两个更为一般的求极限公式。     

信息安全系统中一种高速随机序列发生器的设计与实现

对原来的真随机序列发生器进行研究和分析，指出存在的主要问题是：序列的输出速度较慢，把小波分析理论用于真随机序列发生器，改变原来的输出方式，设计一种新的高速随机序列发生器，以满足快速发展的信息安全系统的要求．     

Peculiarities of dominant mode transformation in rectangular T-septum waveguide with inhomogeneous dielectric loading

A combined 2D numerical-analytical algorithm for electromagnetic (EM) fields computation in one-counter waveguides with arbitrary cross section is proposed. The developed algorithm is employed to investigate the influence of the normalized propagation constant and dielectric loading on the field distribution in a rectangular T-septum waveguide with an E-plane dielectric insert. Dominant-mode varieties of a given transmission line are represented. © 2004 Wiley Periodicals, Inc. Int J RF and Microwave CAE 14, 201–205, 2004.     

Modeling and analysis of workpiece stability based on the linear programming method

After being located on a machine bed, a workpiece will be subject to gravity and cutting forces during the machining operation. In order to keep the locating precision as well as the production safety, it is necessary to maintain the workpiece stability. In this paper, a linear programming method is proposed for stability analysis of the workpiece. Based on the linear approximation of the friction cone, a quantitative criterion is established to verify the workpiece stability in association with the rationality of the clamping sequence, magnitude of clamping forces and clamping placement. This criterion allows designers to plan reasonably the clamping sequence, magnitude of clamping forces as well as clamping placement. Compared with existing methods, the main advantage of this approach lies in that the sophisticated computing of contact forces between fixture elements and the workpiece is avoided. In this work, both friction and frictionless cases can be easily taken into account in stability analysis. Mathematical formulations of the method are given and some numerical tests are finally demonstrated to validate the proposed method.     

同杆多回线序分量法的推广

同杆并架多回线是未来发展的趋势。在研究同杆2回线和4回线的基础上,提出了一种用序分量解决同杆n(n=2、3、4)回线的通用方法。该方法使用矩阵变换对n回线进行解耦,形成相互独立的3n个序分量,并根据这3n个序分量的特点,给出了线路发生故障时的各序分量图。该推广方法的提出,为同杆多回线的故障计算提供一种分析方法。理论分析表明了该通用方法的正确性