Magnetic field dependence of shielding current density in Y-Ba-Cu-O rings at 77 K

A method for contactless measurement of the shielding critical current density and its dependence on the external magnetic field is described and analyzed. The obtained values are compared with those measured resistively on two different samples. It is shown that the shielding critical current densityJ _cs and the intergranular transport current densityJ _cr are identical if the measurement conditions are similar. A degradation ofJ _cs measured in the external field with AC ripple has been observed.     

NO emission characteristics in counterflow diffusion flame of blended fuel of H2/CO2/Ar

Flame structure and NO emission characteristics in counterflow diffusion flame of blended fuel of H₂/CO₂/Ar have been numerically simulated with detailed chemistry. The combination of H₂, CO₂ and Ar as fuel is selected to clearly display the contribution of hydrocarbon products to flame structure and NO emission characteristics due to the breakdown of CO₂. A radiative heat loss term is involved to correctly describe the flame dynamics especially at low strain rates. The detailed chemistry adopts the reaction mechanism of GRI 2.11, which consists of 49 species and 279 elementary reactions. All mechanisms including thermal, NO₂, N₂O and Fenimore are taken into account to separately evaluate the effects of CO₂ addition on NO emission characteristics. The increase of added CO₂ quantity causes flame temperature to fall since at high strain rates a diluent effect is prevailing and at low strain rates the breakdown of CO₂ produces relatively populous hydrocarbon products and thus the existence of hydrocarbon products inhibits chain branching. It is also found that the contribution of NO production by N₂O and NO₂ mechanisms are negligible and that thermal mechanism is concentrated on only the reaction zone. As strain rate and CO₂ quantity increase, NO production is remarkably augmented. Copyright © 2002 John Wiley & Sons, Ltd.     

Engineering Geological Problems of Levee Along Middle and Lower Reaches of Yangtze River

1　ＩｎｔｒｏｄｕｃｔｉｏｎＢｅｃａｕｓｅｏｆｔｈｅｃｏｍｐｌｉｃａｔｅｄｓｕｂｓｏｉｌｐｒｏｆｉｌｅ ,ｔｈｅｌｅｖｅｅａｌｏｎｇｍｉｄｄｌｅａｎｄｌｏｗｅｒｒｅａｃｈｅｓｏｆＹａｎｇｔｚｅ ,ａｂｏｕｔ 36 0 0ｋｍｌｏｎｇ ,ｈａｓｍａｎｙｈｉｄｄｅｎｐｅｒｉｌｓ .Ａｍｏｎｇｔｈｅｄａｎｇｅｒｏｕｓｅｖｅｎｔｓｄｕｒｉｎｇ 1998’ｓｆｌｏｏｄｓｅａｓｏｎｉｎｔｈｅｗｈｏｌｅｖａｌｌｅｙ ,12 .7%ｏｃ ｃｕｒｒｅｄａｌｏｎｇｔｈｅｔｒｕｎｋｓｔｒｅａｍｄｙｋｅｓ,ｏｆｗｈｉｃｈ 6 98ｗｅｒｅｔｈｅｍｏｓｔｄ…     

Nondestructive evaluation of the characteristics of degraded materials using backward radiated ultrasound

The frequency dependency of Rayleigh surface wave is investigated indirectly by measuring the angular dependency of the backward radiation of the incident ultrasonic wave in two kinds of degraded specimens by scuffing or corrosion. Then, the frequency dependency is compared with the residual stress distribution or the corrosion-fatigue characteristics for the scuffed or corroded specimens, respectively. The width of the backward radiation profile increases with the increase of the variation in residual stress distribution for the scuffed specimens. In the corroded specimens, the profile width decreases with the increase of the effective aging layer thickness and is inversely proportional to the exponent, m, in the Paris’ law that can predict the crack size increase due to fatigue. The result observed in this study demonstrates high potential of backward radiated ultrasound as a tool for nondestructive evaluation of subsurface gradient of material degradation generated by scuffing or corrosion.     

屏蔽人体模型对电磁波吸收的数值模拟研究

本文用时域有限差分法计算了三类电磁特性不同的材料屏蔽下三层无限长椭圆柱人体模型对电磁波的吸收。结果表明 ,功率密度相同 ,频率在 0 .2～ 6GHz之间的平面电磁波照射下 ,模型吸收的能量、能量在体内的分布及两者对入射电磁波频率的敏感程度严重地受到外加屏蔽的影响。考察了屏蔽材料的电磁特性与其屏蔽效能之间的关系。三类材料的比较显示 ,对人体电磁辐射防护 ,耗散材料优于非耗散材料 ,导电材料优于非导电材料。     

三峡地下电站变顶高尾水洞水动力特性

在国内首次应用模型水轮发电机组对三峡地下电站变顶高尾水洞方案进行水力过渡过程试验研究。对水轮机导叶实行分段关闭 ,并求出了二段关闭的最佳拐点 ,试验证实了二段关闭对减小尾水管进口的负压和机组转速上升有明显的作用。通过有关水力参数的测试 ,认为变顶高尾水洞可以满足各项技术要求 ,是一个减少山体开挖、节省投资的新型设计方案。在地下电站中具有广泛的应用前景     

数字电视传输流的实时码率变换系统

数字视频压缩后通常是打包成传输流的形式进行传送，年个传输流有其固定的发送码率，在某些应用场合，比如信道调制前端，需要对输入传输流码率进行改变以适应该信道要求，描述了一种全硬件实现，双路输出，实时，节目可选择的码率变换系统的原理及具体实现。     

一种联合信源信道匹配的视频传输方法

介绍了一种实现联合信源-信道编码的通用的新方法—联合信源-信道匹配。该方法思想巧妙,通过将有限的通信系统资源在信源和信道编码器之间进行巧妙合理的分配,从而获得最优的系统整体传输性能。并且,该方法并不仅局限于特定的信源-信道编码器对,可适用于任何一种信源-信道编码器对共享有限系统资源的情况,具有很好的通用性。仿真实验证明了JSCM通用视频传输系统能获得比传统的固定码率分配系统更高的整体性能增益。     

Failure analysis used for remanufacturing of steel rolling components

The guide-pieces, used in the process line of steel rolling, were the important components. The guidepieces, which were slide contacting with the rolled-piece, had a high temperature and high speed. The wear was very serious. The results from failure analysis showed that there were three failure forms in the guide-pieces: the first was the wear during heat friction, the second was the heat fatigue under the cycle of deep heating and deep cooling, and the third was the impact rupture. Among them, the wear was the main reason. To the wear of guidepieces, there were four mechanisms, namely abrasive wear, adhesive wear, fatigue wear and corrosion wear. The failure analysis to the guide-piece laid the foundation for its remanufacturing. Foundation item: Project(50235030) supported by the National Natural Science Foundation of China     

Acoustic emission method for research and control of friction pairs

One of the new physical methods that provides much information about the processes going on in a friction contact zone in real time is acoustic emission (AE). Basic experimental results of AE in friction are presented and analysed. Using AE signals we can get an indication about the state of the friction processes, about the quality of solid and liquid layers on the contacting surfaces in real time, sometimes about intensity of wear, changing of wear and friction regimes and so on. The influence of sliding velocity, load, roughness and some physical and mechanical properties of the body on the parameters of AE are also given. Some attention to the practical implementation of these techniques for control of capability for work of friction pairs in real conditions are given. Modern methods and devices enable condition monitoring of sliding and rolling bearings.