水文自动测报系统防雷的探讨

水文自动测报系统若配备有线／无线（GSM，GPRS）双通道，可提高系统的可靠性，保证系统的畅通。然而，有线组网方式最致命弱点是防雷能力差，针对防雷问题，在实践中探讨其有效途径，论述接地装置的设计、安装中应注意的几个问题，并介绍在实践中电话线防雷从一级防护发展到三级防护，提高防雷的效果，有待在实践中，再认识，再提高。     

通信局(站)的接地与防雷

论述了分散接地与联合接地系统在防雷作用上的差异，归纳出通信局（站）在防雷与接地方面的若干原则。     

“仪表系统接地设计规定”介绍

概述“仪表系统接地设计规定”（2000版）的内容，重点介绍等电位联结的接地方式及其特点。     

Analysis of lightning surge propagation in wind farm

Wind power generation is expected to become more important in future distribution systems. Although several prospective reports such as IEC 61400‐24 and NREL SR‐500‐31115 indicate an insulation scheme and grounding design for lighting protection, there still seems to be too few investigations on the problems. This paper therefore discusses lightning surge analysis using a wind farm model with 2 or 10 ideal wind turbines. Changing parameters such as grounding resistance and lightning strike points, several cases were studied. As a result of the analysis using digital simulator ARENE, it is clear that the surge tends to propagate toward the end of a distribution line in a wind farm and there is the possibility of insulation accidents at the other wind turbines when lightning attacks a wind turbine. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 162(2): 30– 38, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20364     

Emergence of communication in embodied agents evolved for the ability to solve a collective navigation problem

In this paper, we present the results of an experiment in which a collection of simulated robots that have been evolved for the ability to solve a collective navigation problem develop a communication system that allows them to co-operate better. The analysis of the results obtained indicates how evolving robots develop a non-trivial communication system and exploit different communication modalities. The results also indicate how the possibility of co-adapting the robots’ individual and social/communicative behaviour plays a key role in the development of progressively more complex and effective individuals.     

DCS安装调试规范

介绍DCS系统的安装、调试,阐述系统的接地规范、干扰在过程控制中的影响及预防、系统调试的具体方法和步骤。     

避雷器接地电阻的测量与预测方法

介绍了避雷器三极法测量接地电阻的接线、测量原理及测量电压的选取,根据测得的历史数据建立了基于回归分析的接地电阻变化趋势预测模型,并通过标准离差检验证明了该预测模型可用于实际接地电阻的预测。实践表明,该测量与预测方法切实可行,能在一定程度上避免因接地电阻超标而引发的雷击事故。     

中置式高压电容器柜改进设计

分析了南屯煤矿白马河风井变电所高压电容器柜原设计方案存在的问题,并对其进行了改进设计:选用适用于容性负载的真空断路器;添加放电线圈,并将放电线圈与电容器直接并联,使放电线圈与电容器组成一个完整的放电回路;添加接地开关,接地开关既有机械闭锁又有电气联锁,操作方便,安全性高。实际应用表明,改进设计后的高压电容器柜功能更加完善,更加安全、可靠。     

配电网短路故障分析及其识别方法研究

分析了在不同中性点接地方式下单相接地和两相短路接地故障的相电压及中性点电压变化特征,结合三相短路和两相短路的故障特征,提出了完整的配电网短路故障识别方法。仿真结果表明,该方法具有采集的模拟量少、判据简单、运算简便的优点,具有一定的实用价值。     

计及护层环流的电缆温升分析与故障定位方法研究

由于传统IEC热路法无法计算复杂工况下环流变化后电缆温度,因此,采用有限元法并结合电磁场与传热学原理,针对不同接地方式与运行工况下的三相电缆,计算与分析不同常见护层故障下环流变化后的电缆温升情况,为电缆运行状况判断提供参考。结果表明:对于护层交叉互联接地电缆,交叉互联箱进水地或护层接头故障后,故障相电缆温升高达10℃,且故障相电缆在故障点前后出现5℃的温差;对于护层单端接地电缆,发生两相护层故障后,故障点前段电缆较正常运行温升高达13℃以上,故障点前后段电缆存在10℃的温差;三相电缆温升及各相之间温差情况可为电缆温度在线监测提供参考,并根据电缆前后温差出现点对电缆故障点进行定位,尽快检修处理,从而减少后续击穿烧毁事故的发生。