应用地应力模拟技术研究断块区剩余油分布

应力场数值模拟不仅能够重塑出不同阶段地应力场，而且还可以定量一半定量地预测破裂的发生、裂缝的方向和密度，进一步探讨时间和空间上油气运移的规律，为油田勘探、开发提供必要的依据。本文以大庆萨北开发区北二西断层区为研究对象，通过应力场数值模拟研究了流体运移势场与剩余油分布的关系、流体运移与构造应力的关系、裂缝形成与剩余油分布的关系，确定了剩余油分布的有利区域，为油田注采系统的设计、部署和油田开发及措施调整提供了依据。     

基于主元分析的多变量统计过程的故障辨识技术

为了更好的进行故障检测与诊断，介绍了主元分析理论，给出了基于主元分析的过程故障辨识机理及策略。仿真实例表明，利用此方法建立的故障诊断模型，能够在不依赖过程机理的前提下高效抽取原始数据空间的主要变化信息，对过程的非正常变化做出反应，同时还能较正确地找出发生故障的原因以及相应环节。     

CMD－1压缩机组在线状态监测与故障诊断系统

浙江大学本文介绍了实现在线监测的多处理机主从系统以ＳＴＤ总线为基础的热旁待双机冗余高速数据采集部分的结构形式。对系统结构合理性、功能的实用性、运行的可靠性作了论述，并提供了该系统在生产现场实际运行中判断与分析机组故障实例的数据与图谱，该系统可以满足大中型企业旋转机械在线状态监测的要求，实践证明系统的设计和研制是成功的。     

东营凹陷滚动勘探开发技术研究与应用

东营凹陷已进入勘探开发成熟期 ,滚动勘探开发是增储稳产的主要手段 ,精细油藏描述是其关键。总结滚动勘探开发的 4种方式 (老区扩边、发现新块、发现新层系和新区滚动勘探开发 ) ,对断块复杂程度提出按每平方千米内所有断层的累加长度划分的新方法 ,从构造描述、储集层描述和油藏描述方面介绍了滚动勘探开发的技术方法。以永 8断块为例 ,在层位标定、反射特征分析、构造描述流程、地震地质分析等方面进行深入分析 ,归纳精细油藏描述的具体方法 ,强调了三维地震数据体的相干分析、属性分析等技术的重要作用。应用这一滚动勘探开发技术 ,使东营凹陷每年新增滚动储量近2 0 0 0× 10 4 t。图 3参 10     

Application of the blind source separation method to feature extraction of machine sound signals

As the result of vibration emission in air, a machine sound signal carries important information about the working condition of machinery. But in practice, the sound signal is typically received with a very low signal-to-noise ratio. To obtain features of the original sound signal, uncorrelated sound signals must be removed and the wavelet coefficients related to fault condition must be retrieved. In this paper, the blind source separation technique is used to recover the wavelet coefficients of a monitored source from complex observed signals. Since in the proposed blind source separation (BSS) algorithms it is generally assumed that the number of sources is known, the Gerschgorin disk estimator method is introduced to determine the number of sound sources before applying the BSS method. This method can estimate the number of sound sources under non-Gaussian and non-white noise conditions. Then, the partial singular value analysis method is used to select these significant observations for BSS analysis. This method ensures that signals are separated with the smallest distortion. Afterwards, the time-frequency separation algorithm, converted to a suitable BSS algorithm for the separation of a non-stationary signal, is introduced. The transfer channel between observations and sources and the wavelet coefficients of the source signals can be blindly identified via this algorithm. The reconstructed wavelet coefficients can be used for diagnosis. Finally, the separation results obtained from the observed signals recorded in a semi-anechoic chamber demonstrate the effectiveness of the presented methods .     

环缝错边容器的有限元分析与容限探讨

采用有限元方法对 1台封头与筒体具有较大错边量的容器进行了应力分析 ,得到了错边区域的应力分布状况 ,并对其进行应力强度评定。结果表明 ,该容器错边部位的应力是满足应力分析准则的。通过对存在不同错边量的容器进行应力分析 ,探讨了容器的错边容限 ,对含有错边缺陷在役容器是否合乎使用的判断具有一定指导意义     

An application of expert systems techniques to the on-line control and fault diagnosis of a mixing process

An application of expert hierarchical control is described in this paper. The control is implemented in a two-level configuration, where the lower layer performs direct regulation control and the upper layer performs supervisory functions. In the regulation layer, a rule-based controller performs the regulation task, where the controller is constructed upon causal relations between subsystems. The control action is inferred from the measurement of both controlled and noncontrolled variables. In the supervisory layer, the main function is a fault diagnosis system which diagnoses faults on-line. The diagnosis is based upon reasoning from the structure of the system and the functions of its components, and efficient diagnosis is achieved by dividing the system into several subsystems. The overall technique has been successfully implemented on a pilot scale mixing process under on-line computer control.     

广州港起重机械裂纹诊断系统的应用及改进

从港口起重机金属结构的故障管理与实践出发，通过对故障原理的分析，在断裂力学的基础上，对存在宏观裂纹构件的使用寿命和巡检周期进行预测，并开发出了港口起重机械金属结构裂纹诊断系统。通过在广州等大港口的推广，方便了维修、管理人员的使用。最后对该系统在应力测试操作中的经验和教训进行了总结。     

Analysis of lightning surge propagation in wind farm

Wind power generation is expected to become more important in future distribution systems. Although several prospective reports such as IEC 61400‐24 and NREL SR‐500‐31115 indicate an insulation scheme and grounding design for lighting protection, there still seems to be too few investigations on the problems. This paper therefore discusses lightning surge analysis using a wind farm model with 2 or 10 ideal wind turbines. Changing parameters such as grounding resistance and lightning strike points, several cases were studied. As a result of the analysis using digital simulator ARENE, it is clear that the surge tends to propagate toward the end of a distribution line in a wind farm and there is the possibility of insulation accidents at the other wind turbines when lightning attacks a wind turbine. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 162(2): 30– 38, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20364     

沾化凹陷南斜坡油气运移条件及运移特征研究

油气运移的条件和油气运移的特征决定了油气藏的形成与分布。沾化凹陷南斜坡不整合面、断层以及各层系储集砂体的空间配置构成复杂的立体网络通道，决定了油气的运移，控制了油气分布。以断层为垂向运移通道的油气藏常在断层带附近多层叠置；以连通砂体为主要运移通道的油气藏常形成于距烃源层较近或相邻的层位；以不整合面作为运移通道往往可使油气长距离运移形成各种地层油气藏。沾化凹陷南斜坡的油气藏都是油气经过两种或多种输导层阶梯式运移而形成的。砂体、断层和不整合面组成的输导系统的末端和边缘是油气运移的重要指向区。