应用10mm薄板铸锭制备的NdFeB烧结磁体

NdFeB薄板铸锭具有晶粒细，富钕相分布均匀及在稀土含量较低时可以防止α－Fe相出现的特点，是一种适合制备高性能烧磁体的合金铸锭，本文介绍了一种用10mm薄板铸锭和球磨制粉方法制备烧结磁体的工艺，在设备要求较低的情况下制备得到了Br=1.37T,(BH)max=320kJ/m^3(40MGOe)的烧结磁体，同时比较了使用常规铸锭和常规工艺的结果，强调了氢爆法在该工艺中的重要作用，最后对该工艺的改进方向和10mm铸锭的应用前景进行了阐述。     

单片机在监控同步电动机运行功率因数中的应用

介绍如何利用单片机自动控制同步电动机运行时的功率因数。     

液压同步剪系统的设计

本文通过对蜂窝陶瓷载体成型过程的分析，指出在其成型过程中存在的问题，提出了采用液压同步剪解决这些问题的方法。论文分析了同步剪的工作原理，给出了其液压原理图及其设计特点。     

大型结构物自动称重过程的计算机控制技术

大型结构物的称重通过多个千斤顶同步顶升实现。大型结构物往往存在柔度大、重量分布不均、支点跨距大的特点。在称重过程中需要进行计算机同步控制,实现结构物的平稳顶升和下降。大型结构物自动称重以工控机为核心,基于现场总线技术,对压力传感器、位移传感器、状态设置开关、油泵换向阀和油管超高压电磁阀等设备进行网络监控,对多个支点同步协调控制和结构物的精确称重,该系统已在多个油气田工程的建造中得到实际应用。     

高炉鼓风机就地扩容改造方案及经济效益

介绍了利用高炉鼓风机基础实施不易地扩容改造的设计工艺方法，该方法不仅降低了设计、施工、安装费用，而且缩短了施工周期，降低了固定资产投资。     

Sensorless control of synchronous reluctance motors using on‐line parameter identification method not affected by position estimation accuracy

This paper presents a novel on‐line parameter identification method for sensorless control of Synchronous Reluctance Motors (SynRMs). Although conventional sensorless control methods based on mathematical models usually need some complex measurements of motor parameters in advance, the proposed identification method does not require them and can be realized on‐line. The proposed method identifies motor parameters under sensorless control, so rotor position and velocity cannot be used to identify these parameters. However, the proposed method does not need rotor position and velocity, and identified parameters are not affected by these estimation errors. The sensorless control using identified motor parameters is realized, and the effectiveness of the proposed method is verified by experimental results. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 155(3): 62–69, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20258     

盘式永磁无刷电动机设计中的一些问题

介绍了盘式永磁无刷电动机的原理和结构，探讨了其设计特点，解决了磁路分析计算和电机主要尺寸确定以及磁极形状选择的问题。     

微电机与微加工

简述了和微电机相关的微加工生产中的方法，介绍了微型机电部件成型的实现途径。     

Variability in stepping direction explains the veering behavior of blind walkers.

Walking without vision results in veering, an inability to maintain a straight path that has important consequences for blind pedestrians. In this study, the authors addressed whether the source of veering in the absence of visual and auditory feedback is better attributed to errors in perceptual encoding or undetected motor error. Three experiments had the following results: No significant differences in the shapes of veering trajectories were found between blind and blindfolded participants; accuracy in detecting curved walking paths was not correlated with simple measures of veering behavior; and explicit perceptual cues to initial walking direction did not reduce veering. The authors present a model that accounts for the major characteristics of participants' veering behavior by postulating 3 independent sources of undetected motor error: initial orientation, consistent biases in step direction, and, most important, variable error in individual steps. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Structure and Magnetic Properties of LaCo_(13-X)M_X Intermetallic Compounds

ＳｔｒｕｃｔｕｒｅａｎｄＭａｇｎｅｔｉｃＰｒｏｐｅｒｔｉｅｓｏｆＬａＣｏ＿（１３－Ｘ）Ｍ＿ＸＩｎｔｅｒｍｅｔａｌｌｉｃＣｏｍｐｏｕｎｄｓＷＵＪｉａｎＭｉｎ；ＬＩＦｅｎｇ；ＴＡＩＬｉＣｈｉａｎｄＺＨＥＭＧＱｕｎＳｔｒｕｃｔｕｒｅａｎｄＭａｇｎｅｔｉｃＰ...