群时延精确设计的全差分四阶Bessel滤波器

采用MOS管有源电阻,提出了一种全差分R-MOSFET-C四阶Bessel有源低通滤波器,.通过调节工作于亚阈值区的CMOS管的沟道导纳补偿电阻值的大小,能抵消集成电路制造工艺中电阻值的一致偏差,实现Bessel有源滤波器群时延的精确设计.根据无源滤波器的状态方程完成有源滤波器的综合,应用3.3V,0.5μm CMOS工艺完成了群时延大小为0.75μs的四阶Bessel低通滤波器的管极计算机仿真,仿真结果表明所提电路正确有效,适于全集成.     

A novel laboratory bench for practical evaluation of catalysts useful for simultaneous conversion of NOx and soot in diesel exhaust

This study deals with the development of a laboratory bench for the practical evaluation of catalysts that are useful for the direct conversion of NO_x and soot in the exhaust of diesel engines. The employed model exhaust is generated by using a diffusion burner with additionally dosing some gaseous components to the burner gas to obtain a realistic feed composition. The produced soot is extensively characterized by employing thermogravimetry, transmission electron microscopy, N₂ physisorption and temperature programmed techniques. The results of the different characterization methods show that the present soot is suitable for the intended catalytic investigations. The simultaneous conversion of NO_x and soot is examined like in practice, i.e. the soot is separated from the tail gas by a diesel particulate filter (DPF) that is coated with the catalyst. The deposited soot is then catalytically converted by NO_x and O₂ to form N₂ and CO₂. The conversions of NO_x and soot are measured by exclusively applying gas analysers, whereby a special experimental procedure is developed to determine the soot removal. Hence, additional soot related analytics are not required. To show the suitability of the constructed bench a Pt/Fe₂O₃/β-zeolite sample is taken as test catalyst that is reported to be very active in NO_x/soot reaction. The measurements performed with and without catalyst clearly show the effect of the used sample in simultaneous NO_x/soot conversion. We therefore consider the constructed laboratory bench to be a useful tool for testing and ranking catalytic materials.     

大电流监测信号提取的光收发及信号处理

近年来,大电流的监测成了人们十分关心的问题,这是由于大电流有强磁、高压、电流大等一系列的直接监测所不能克服的问题。这就需要把高压大电流的强电信号,经过提取后变成能在实验室中直接观测的弱电信号。为此,如何从高压大电流的信号中提取出随实时信号变化而实时变化的小信号就变成了一个关键问题。详细介绍了监测信号提取的光收发电路原理和后续信号处理电路,分析了各部分的作用,给出了必要的分析结果。     

基于双阈值的视频平滑控制方法

在现有的TCP／IP网络中进行多媒体通信，服务质量是人们关注的重要内容。作为服务质量中的一项指标，视频平滑已成为研究和应用开发的一个热点问题。分析当前控制视频平滑的方式，提出一种基于双阈值视频平滑的控制方法。这种方法能够有效地改善视频平滑性能。     

从销钉起家的“正业电子”

本文介绍了参观“正业电子有限公司”的概况。     

基于晶体双折射的光学FIR滤波器设计

提出建立在晶体双折射基础上，由晶体延迟片堆组成的光学FIR（Finite Impulse Response)滤波器设计方法，用以实现任意形状光谱输出。从FIR信号理论出发，建立了光学FIR滤波器数学模型，并分析了它与FIR滤波器的映射关系。在给出“输出反向传递法”来完成其光学实现同时，还以G／M滤波器设计实例证明其优良的光谱特性及角度特性。     

基于广义最小均方的自适应递归滤波算法

本文提出了一种广义最小均方(GLMS)算法,分析了GLMS算法的性能,并根据GLMS算法,导出一种自适应递归滤波(ARF)算法。在推导中,ARF算法避开了超稳定定理,从而考虑自适应系统的严格正实条件和Popov不等式是不必要的。计算机模拟表明ARF算法具有很高的收敛速度。     

非平稳ARMA信号自校正滤波器及其应用

本文处理带白色观测噪声的非平稳ARMA信号估计问题.应用状态空间方法和现代时 间序列分析方法[1],基于ARMA新息模型,提出了非平稳ARMA信号自校正滤波器,推广了 Hagander和Wittenmafk的结果[2],并给出了在雷达跟踪系统和检测数据数字滤波方面的应 用.仿真结果说明了本文结果的实用性和有效性.     

PARASITIC TOLERANT DIFFERENTIAL SC TRANSCONDUCTANCE USING UNITY GAIN BUFFERS

The unity gain buffer will be good to design high frequency SCF if its resistiveeffects can be eliminated,and therefore the whole parasitic sensitivities will greatly be reduced.On the basis of this concept,a novel parasitic tolerant SC DTE(differential transconductanceelement)is proposed.SC floating inductor and integrator fit for high frequency applications areformed by the DTE.The computer simulation and experiment on a third order elliptic LP filterverify its validity.     

可变波长光纤光栅滤波器用微驱动器的研制

为了研制可调谐光纤光栅滤波器而采用拉伸装置和光纤光栅一体化的微小器件结构。实现方法是由微细加工技术加工制造一种新的波长可变光纤光栅滤波器用驱动器，该微型驱动器采用电磁式驱动，由上下两层线圈构成，每个线圈有21匝平面线圈，产生约0．2μNm的扭矩，对应光纤光栅的反射波长变化约5nm。它可应用于可谓谐光纤光栅滤波器的驱动。