新型超微晶软磁合金FePCCuMoSi微观结构缺陷的正电子湮没研究

用正电子湮没方法研究了新型超微晶软磁合金的微观结构缺陷，样品选用的是在不同温度下退火的Ｆｅ８１Ｐ１２Ｃ３Ｃｕ１Ｍｏ０．５Ｓｉ２．５合金，结果表明，合金的微观结构构陷大小，密度随退火温度有规律地变化，这种现象可能与非晶的晶化过程有关。     

Sub-optimal solutions to track detection problem using graph theoretic concepts

This paper demonstrates how the problem of tracking targets, which appear as either straight or curved lines in two-dimensional display images (or data images) can be formulated in terms of a directed weighted graph model and how dynamic programming techniques can be efficiently applied to reach an optimal or sub-optimal solution. In general, track detection algorithms providing optimal solutions have good detective ability, but most of them suffer from the inability to detect discontinuous lines or to resolve efficiently pairs of crossing lines. A sub-optimal solution is provided that efficiently overcomes these weaknesses. We focus on modeling the track detection problem in terms of a graph, formulating fast sequential/parallel sub-optimal track detection algorithms and testing them on simulated data in order to show their detective ability. Moreover, we specify the conditions under which sub-optimal algorithms can perform at least as well as their corresponding optimal algorithms. This is significant for the track detection problem where fast, accurate and real-time detection is considered a necessity.     

PSD激光直线度测量仪

介绍了采用PSD传感器设计的激光直线度测量的工作原理，以及激光器、光靶和计算机系统的设计。     

替代进口梳棉机测厚传感器集成电路芯片分立元件的电路设计

介绍了替代进口梳棉机测厚传感器集成电路分立元件的电路图，工作原理及特点。一年多的实际运行证明，电路参数达到了设计要求。     

Theoretical Analysis of Critical period in Microbend Fiberoptic Sensor

1IntrodctionThesdV8fltsg6Sofffi1CY0bCfldf山CY0ptlCS6fiS0f8f6lflt6llSltyffiDdU18tlflgsliddCtCCtlflg，simpletechnique，highrellabllltyandlowprice，thereformlcrobendfiberoptlcsensorIswidelyusedtomeasurementofstrain，stressandv比rationetc．Inpractice，thesensltlvltyofsensorIsaveryimportantparameter，andthesensltlvltyofmlcrobendf山eroptlcsensorIsmainlyrelat-6dtofoil0WlflgthY66f8CtofS［‘-：ffilCfob6fldsffiplltlld6：fillffib6yofthlCY0b6fldS6Ct10llSsfldffil-crobendperiod，andmlcrobendperio…     

Modelling aerodynamic sound in the airways of a human body: A possible diagnostic tool

The sound generated aerodynamically by a pillow-like body simulating an obstacle in the human airway is observed through a soft wall from outside the duct. It is intended to provide a physical basis for an attempted medical diagnostic technique for detecting an obstacle by observing the sound during breathing. So far at least two kinds of sound have been identified: One is sound of the half-jet flow formed downstream of the obstacle, and the other is sound due to unsteady motion of the separation point on the curved surface of the obstacle. For simulating the flow condition downstream of the vocal cords during inhalation, cases with an obstacle at various positions relative to a jet flow are also examined. In this case, the sound due to the downstream obstacle exhibits a complicated dependence on the geometry and flow parameters. Nevertheless, increase in the sound, or more correctly, deformation in the sound power spectrum, due to the presence of an obstacle is detectable from outside, opening up possibilities of its use as a diagnostic aid. Dedicated to the late Professor Itiro Tani on the occasion of 5ACFM, Taejon, Korea     

光纤压力传感器微机控制与数据处理系统

本文介绍的光纤压力传感器微机控制与数据处理系统是以8098单片机为核心,配上适量的外围电路所构成。该系统直接利用8098单片机芯片内的A/D模拟输入通道和脉宽调制(PWM)功能来进行数据采集和输出控制信号。该系统还方便地实现与微型打印机的联接,以便将采集的数据保存。整个系统结构简单,成本低,可靠性高,实时控制和测试功能较强,有良好的工业应用价值。     

机械合金化的原理及在磁性材料研究中的应用

介绍了机械合金化的原理和描述机械合金化过程的理论模型。综述了机械合金化在磁性材料研究中的应用，并对目前研究中的存在的问题及发展前景进行了分析。     

Fe73.5Cu1Nb3Si13.5B9非晶合金的晶化动力学

用ＤＴＡ结合ＸＲＤ了Ｆｅ７３．５Ｃｕ１Ｎｂ３Ｓｉ１３．５Ｂ９晶合金的晶化动力学。表明，该事金在５００℃时析出α－Ｆｅ（Ｓｉ）相。晶化初期激活能最小为２４２ｋＪ／ｍｏｌ，它随晶化量的增加，在ＸＣ为０．４－０．８时，呈极大值为５２０ｋＪ／ｍｏｌ。在６２４℃时析出Ｆｅ２Ｂ相。     

Modeling video sources for real-time scheduling

What is the impact of the autocorrelation of variable-bit-rate (VBR) sources on real-time scheduling algorithms? Our results show that the impact of long term, or interframe, autocorrelation is negligible, while the impact of short term, or intraframe, autocorrelation can be significant. Such results are essentially independent of the video coding scheme employed. To derive these results, video sequences are modeled as a collection of stationary subsequences called scenes. Within a scene, a statistical model is derived for both the sequence of frames and of slices. The model captures the distribution and the autocorrelation function of real-time video data. In previous work, the pseudoperiodicity of the slice level auto-correlation function made it difficult to develop a simple yet accurate model. We present a generalization of previous methods that can easily capture this pseudoperiodicity and is suited for modeling a greater variety of autocorrelation functions. By simply tuning a few parameters, the model reproduces the statistic behavior of sources with different types and levels of correlation on both the frame and the slice level.