The current and residual value of superphosphate for lupins grown in rotation with oats and wheat on a deep sandy soil

In a field experiment on a deep pale-yellow sand in a 600 mm per annum rainfall Mediterranean environment of south-western Australia, six levels of phosphorus (P) as superphosphate (O up to 546 kg P ha^–1) were applied once only, to the soil surface, before sowing lupins (Lupinus angustifolius). The lupins were grown in a continuous arable cropping rotation with, in successive years, oats (Avena sativa), wheat (Triticum aestivum), lupins. Five such rotations were started in the experiment from 1985 to 1989. The experiment continued until the end of 1990.The relationship between lupin seed (grain) yields and the level of P applied was measured in the year of P application for five successive years (1985 to 1989). The relationship had the same general form but it varied between years, largely due to different maximum yields (yield plateaux) in each year.The residual value of superphosphate applied three years previously was measured for lupins on two occasions (1988 and 1989) relative to superphosphate applied in the current year. The residual values was different in the two years. The superphosphate applied three years previously was about 30% as effective as freshly applied superphosphate in 1988, and 12% as effective in 1989.At each harvest, the relationship between grain yield and the P concentration in the grain differed for different species. However, for each species at each harvest, the relationship was similar regardless of when the P was applied in the previous years. Thus each species had the same internal efficiency of P use curve, and yields varied only with P concentration in tissue.Bicarbonate-extractable soil P was determined on soil samples taken in mid-July of 1989 and 1990. These soil test values were related to grain yields at harvest. The relationship between yield and soil test values had the same general form but varied for different species within years and for each species between years. It also varied for each species within years depending on the year the P was applied.     

利用短周期地脉动推断深层地基S波速度

从二维随机波场的相关理论出发，提出了如何从短周期地脉动（频率＞０．５Ｈｚ）时域信号中计算Ｒａｙｌｅｉｇｈ波弥散曲线，进而反演深层地基剪切波（Ｓ波）速度的理论方法和分析技术，并结合实测信号的分析结果，探讨了该方法的可行性和实用性。     

低电阻率气层测井评价方法

粘土矿物成份是造成气层电阻率低的主要原因。用灰色静态模型计算孔隙度，用BP神经网络计算束缚水饱和度等参数。与岩心分析结果比较，储层参数计算结果精度有所提高。用储层参数建立气层和水层的判别式，判别结果与试油有较好的一致性。综合数字处理结果建立了气层产能评价模型，处理结果与试油结果比较，符合率82％。     

HDPE/CB-GP复合材料体系电性质的研究

当HDPE含量46％（质量分数，以下同）、其它添加剂（如抗氧剂、阻燃剂、交联剂和润滑剂等辅助填料）的含量11％，两种导电填料石墨（GP）和碳黑（CB）的总含量为43％时，研究结果表明石墨含量的变化对HDPE/CB-GP复合材料室温电阻率、阴C强度和后NTC强度有显著的影响．HDPE/CB-GP复合材料中GP的含量〈8．6％时，样品的室温电阻率〈30Ω·m，PTC强度〉7、后NTC强度〈1．3；电阻率．温度曲线经过17次冷热循环后重现性好，复合材料具有实际应用价值；GP在复合材料中为层片状结构。     

高速公路建设水土流失防治研究

本文以西南地区的几条高速公路为例,阐述了高速公路建设项目水土流失的特点及防治对策,将工程措施与植物措施相结合并积极地采用新方法、新技术,从而有效地改善公路沿线的生态环境.     

基于WebGIS的粗泥沙集中来源区电子地图系统研究

基于WebGIS的粗泥沙集中来源区电子地图系统建设，以粗泥沙集中来源区作为研究区域，以黄河中游粗泥沙集中来源区水土保持工作流程（包括规划设计、计划管理、综合治理、预防监督和淤地坝管理等）为主线，依托黄河流域水土保持生态与环境监测系统网络、黄河流域水土保持监测系统数据库，建立覆盖黄河流域、黄土高原区、多沙粗沙区、粗泥沙集中来源区，面向不同水土保持管理层的水土保持监测与管理信息系统。     

软土地层中盾构法开挖三维有限元模拟

以某条软土地层中开挖的地铁隧道为例,根据非线性有限元法的基本原理,利用大型非线性有限元软件ADINA三维动态模拟地铁隧道开挖过程,计算结果揭示了在盾构推进过程中地表沉降分布以及特点,得到盾构法开挖引起的地表沉降曲线,其形态与Peck计算得出的横向地表沉降槽正态分布曲线的形态基本一致,隧道轴线正上方地表沉降最为明显。     

浅谈气泡混合轻质土的特点及应用

结合高速公路的发展,分析了气泡混合轻质土的设计机理,详细地介绍了气泡混合轻质土的工程特性,阐述了气泡混合轻质土在公路建设中的应用,最后对气泡混合轻质土的应用前景进行了展望。     

东濮凹陷低阻油层成因研究

针对东濮凹陷低阻油层的测井曲线显示特征，从岩石物理特性、油藏高度、泥质砂岩阳离子交换、换井滤液侵入和导电矿物影响等几个方面系统地进行了低阻油层成因研究。研究结果表明，东濮凹陷伏阻油层的形成是多种因素共同作用的结果，但骨架颗粒岩性细、泥质含量偏重、地层水矿化度高，油藏高度低是形成东濮凹陷低阻油层的主要因素。     

对异常高压层厚度划分问题的探讨

通过对喇嘛甸油田800多口聚合物井、更新井的厚度划分及对15口井的异常高压层处理的实例，根据异常高压层在电测曲线上的反映特征，准确地将异常高压层识别出来，并采用本井上下相似层对比法、周围邻井砂体预测分析法、新老标准相结合法等综合分析判断方法，正确地划分异常高压层的厚度，将漏划或少划的厚度补划上。给后续的油层对比、水淹层解释、射孔方案的编制及动态、开发综合方案的调整提供准确的基础数据，并为套管损坏的防治、新钻井的异常高压层厚度解释提供了可借鉴的依据。