VSAP软件在碟式太阳能热发电系统设计中的应用

进行碟式太阳能热发电系统结构设计的关键是保证其可靠性和稳定性，为此，本文用VSAP有限元软件完成了系统结构的设计计算与分析，并在此基础上解决了聚光器配重、改善系统稳定性等问题。     

新型太阳能空调节能窗的原理与结构

基于太阳辐射的光变特性和多层薄膜材料的变色效应，分析了新型太阳能节能窗对热候，冷候和温候空调的工作原理，重点讨论了可实现外加参量的动态调节透光性的薄膜材料的性能。     

Improvement of device performances by thin interlayer in conjugated polymers/methanofullerene plastic solar cell

Recent studies have reported that a thin interlayer between poly(3, 4-ethylene dioxythiophene)-poly(styrene sulfonic acid) (PEDOT: PSS) and an emissive polymer layer leads to a large increase in the performances of polymer light-emitting diodes (PLEDs) by preventing significant quenching of the radiative excitons at the PEDOT: PSS interface; therefore, acting as an efficient exciton-blocking layer. Using the similar idea, a thin interlayer was fabricated between PEDOT: PSS and the active layer of conjugated polymers/methanofullerene composites in a plastic solar cell. The interlayer consisted of a poly(fluorene)-based hole transporter spin-coated directly on top of the PEDOT: PSS layer. The devices with the interlayer exhibited a higher efficiency than in those without the interlayer.     

Photovoltaic properties of SnCl2Pc films and SnCl2Pc/pentacene heterostructures

The optical and photovoltaic properties of dichlorotin phthalocyanine (SnCl₂Pc) films and SnCl₂Pc/pentacene (Pn) heterostructures (HS) have been studied. Weak bands at 1.35, 1.52 and 2.05 eV have been found in absorption and modulated photoreflectance spectra of SnCl₂Pc films. These bands can be caused by the formation of charge transfer states. The low concentration of recombination centers of charge carriers has been formed on a free surface of SnCl₂Pc films. This concentration essentially decreases at air evacuation before vacuum deposition of a Pn layer. Therefore, interface with an insignificant recombination rate of charge carriers is formed for SnCl₂Pc/Pn HS.     

太阳能热利用的现状和发展

开发利用新能源，尤其是太阳能，对人类环境的改善和社会的发展具有重要的战略意义。综述了国内外在太阳能热利用方面的现状及发展前景     

ANALYSIS OF OPEN SUN DRYING EXPERIMENTS

Open sun drying has lost its previous importance due to the fact that different factors affect its reliability and the quality of the products obtained.

One of the set-backs for the analysis of solar drying exoeriments is their deoendence on a non-controlled source of energy, i.e. solar radiation depends on climatic conditions and experiments are difficult to compare. It is thus necessary to investigate the advantages of a particular set up as well as the climatic influences. Open sun drying could constitute the natural reference, allowing the comparison of different drying strategies.

A new way of standardizing drying times, based on solar radiation inout, is proposed, to allow better evaluation of the experiments. An equivalent time is defined, allowing comparison of experiments carried out under different circumstances. Carrots and potatoes were used in these experiments.

The use of the average daily solar radiation 15.28 MJ m^-2.d^-1 in Palma de Mallorca (39.33°N, 2.37°E), is proposed for comparison purposes. An improvement of more than 12 % in the explained variance was observed, the unexplained variance being lower than 1 %.     

基于BP神经网络的光伏阵列温度预测

针对现有太阳能光伏阵列仿真实验中因采用环境温度代替光伏组件温度而导致的光伏阵列建模不正确问题,指出应在光伏电池仿真模型中区分环境温度和组件的实际工作温度;分析了光伏组件温度与环境温度和输出功率的关系,给出了一种基于BP神经网络的光伏阵列组件温度预测方法,并将预测结果与实测结果进行比较,得出结论:该方法可有效预测光伏阵列组件温度,且采用前一天数据和前三天数据都有较好的预测效果,因此实际应用时可采用前一天的数据来预测当天的组件温度。     

太阳辐照绝对辐射计的精密温度控制系统设计

为了提高太阳辐照绝对辐射计(SIARs)的测量精度,消除温度变化对SIARs测量精度的影响,研究设计了精密温度控制系统,对SIARs进行恒温控制;通过对铂电阻温度传感器自热效应的弱化,提高了温度测量的精度;提出了一种新的复合PID控制算法,该复合控制算法使系统获得良好的动态和稳态性能;使用密闭的高低温箱来模拟星上温度条件对系统进行了实验测试,实验数据表明,系统控制精度在0.1℃以内,可为SIARs工作提供稳定的温度环境。     

基于微电压调节的太阳能充放电系统设计

基于微电压调节的太阳能充放电系统,是以微控制器LPC1114为核心的太阳能电池板充放电电路,是实现高效率的智能充放电设计方案。微电压调节理论整合了经典电压回授法和多种太阳能最大功率点追踪思想,利用简单合理的DC／DC平衡技术,充分考虑系统功耗等问题,以简单的电路设计和创新的软件思想实现更高效率的太阳能系统。随着能源危机的加剧,高效率、低成本的太阳能系统备受社会关注,其在民用、交通等领域的运用也更加重要。