浅谈涤纶全拉伸丝油剂

介绍了涤纶全拉伸丝(FDY)工艺对纺丝油剂的要求,概括了国内外涤纶FDY纺丝油剂的研究状况,就油剂用表面活性剂原料的选择、油剂的配制、油剂配方设计以及油剂使用过程中应注意的一些问题进行了阐述。     

工业过程的先进控制

在分析工业过程特点的基础上，总结了工业过程先进控制的发展现状，阐述了PID控制器参数整定和模型预测控制的基本概念和内容，讨论了工业过程先进控制的核心内容及其带来的可观的经济效益，并探讨了先进控制软件的产业化问题。     

全自动机器人在涤纶长丝生产中的应用

"机器换人"是荣盛石化股份有限公司在化纤生产中的一次设备革新,也是将传统生产逐步过渡到智能化生产的一次大胆尝试。介绍了从德国引进的高端工业自动化落丝包装一体化设备,通过全自动机器人的运用,实现从落丝—输送—检测—中间立体仓储—包装等全自动一体化功能,帮助企业提高了自动化程度,节省了人工成本,提高了生产效益。     

对“一业为主、多种经营”的三点认识

浦市化工总厂１５年多种经营的体会有三条：由于中小矿山规模小、交通不便，从事多种经营既是自身生存发展的必由之路，又要着眼于填补市场空白，不断优化产品结构，开发新产品的同时必须狠抓经营管理；不断完善规章制度。面对变化、竞争的市场，缺乏足够的产品开发资金和快速反应的机制，还有一些其他不利因素，必须由国家采取调控手段才能加以解决。     

正交试验法在PAN原丝纺丝工艺中的应用

利用正交设计方法确定了PAN湿法纺丝过程中影响原丝性能最主要的因素。结果表明 :以计量泵转速、凝固浴温度、负拉伸以及蒸汽拉伸倍数作为考察对象 ,影响原丝性能的最显著因素是蒸汽拉伸倍数 ,其次是负拉伸。以负拉伸、第二拉伸、第三拉伸以及蒸汽拉伸的倍数作为考察对象 ,影响原丝性能最显著的是蒸汽拉伸倍数 ,负拉伸几乎没有影响。利用正交实验结果 ,适当调节蒸汽拉伸倍数 ,制得强度为 6.5～ 7.0cN/dtex ,线密度为 1.1～ 1.3dtex的原丝     

FDY油剂的润湿性及其对纺丝加工性能的影响

介绍了 FDY油剂润湿性的意义及其在纺丝加工过程中的作用。讨论了润湿性对加工纤维的摩擦系数、抗静电性、强伸度的均匀性及可纺性的影响程度     

三箱式纺丝技术生产PET/PA6复合纤维

介绍了采用三箱式纺丝技术生产PET/PA6复合纤维的设备及工艺。重点对纺丝箱体、纺丝温度控制进行了详细的讨论。     

High resolution solid state 13C n.m.r. of butadiene grafted polypropylene

¹H dipolar decoupled ¹³C n.m.r. experiments with the aid of the magic angle spinning technique have been used to determine the graft content and the isomer content of the polybutadiene grafts in a graft copolymer with isotactic polypropylene.     

Agroecological analysis and economic benefit of organic resources and fertiliser in till and no-till sorghum production after a 6-year fallow in semi-arid West Africa

A field experiment was conducted in Gampela (Burkina Faso) in 2000 and 2001 to assess the impact of organic and mineral sources of nutrients and combinations thereof in optimising crop production in till and no-till systems and to assess the economic benefit of these options. The study showed that under conditions of rainfall deficiency, the use of a single organic resource at an equivalent dose of 40 kg N ha⁻¹ better secured crop yield than the application of an equivalent amount as urea-N, while a combination of organic resources and fertiliser was better in increasing crop yield than the application of the same N amount in the form of urea. In a year of rainfall deficiency, a mix of organic resources and fertiliser in both till and no-till systems increased crop water use efficiency, with the result that the farmer was able to purchase only half of the normal quantity of N fertiliser to obtain a higher yield that he would have done when all of the N was supplied in the form of urea. Under conditions where soil N is deficient, an economic benefit was achieved when urea was combined with easily decomposable organic material (e.g. sheep dung); mixing the urea at a dose of 40 kg N ha⁻¹ with maize straw was not sufficient in alleviating the negative interaction due to the enhanced N immobilisation. The results demonstrate that the use of N fertiliser alone was risky and that a higher yield, with the accompanying economic benefit, was scarcely achieved under the prevailing rainfall conditions. The application of soil and water conservation measures can contribute greatly to increasing the economic benefit of mineral, organic or combined organic and mineral-derived nutrient application under semi-arid conditions.     

Surface hydrolysis of filaments based on poly(trimethylene terephthalate) spun at high spinning speeds

The surface alkaline hydrolysis of fibers made from poly(trimethylene terephthalate) (PTT) was studied after extruding the polymer at high spinning speeds from 2000 to 6000 m/min and heat setting in the range of temperatures from 100 to 180°C. Fiber weight loss increased with an increasing heat‐setting temperature but it was also dependent on the spinning speed. Some of the partially hydrolyzed fibers had a well‐developed, hydrophilic surface, and pore size in the range of 0.69 to 1.20 μm. The optimum reaction and morphological conditions for increasing porosity in PTT fibers depends on spinning speed and heat‐setting temperature. A temperature of 180°C is the upper limit for heat‐setting PTT filaments but seems to be the most effective for making porous fibers. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1724–1730, 2004