Energetics of Plastic Deformation of Metastable Austenitic Stainless Steel

The change in the internal energy during uniaxial tensile deformation of austenitic stainless steels EN 1.4301 (AISI 304) and EN 1.4318 (AISI 301LN) was determined by measuring the extent of γ→α'‐martensite transformation and the temperature increase of the samples. From the results the fraction of the stored energy of cold work and the free energy change related to the strain‐induced γ→α'‐martensite transformation were determined. The fraction of stored energy varied around 0.4. With the metastable steel grades the free energy change related to the γ→α'‐martensite transformation was found to vary between ‐98 MJ/m³ and ‐206 MJ/m³ depending on the austenite stability of the steel. Furthermore, the magnitude of the mechanical driving force was estimated by comparing the results with the free energy change of thermally induced transformation.     

X-射线荧光增量法测定硅铁合金中的Ca、Ba

介绍了X-射线荧光增量法同时测定硅铁合金中的Ca、Ba，探讨了基体效应校正、扩展曲线的应用范围，方法准确度和精度高。     

煤气管道膨胀节腐蚀和在线包焊技术应用

简单分析了高炉煤气中Cl元素的存在对不锈钢膨胀节的应力腐蚀问题和防止途径，作为一种临时性的防范措施，简要介绍了煤气膨胀节包焊实施步骤和措施。     

宝鸡民营钛工业发展现状

介绍了宝鸡民营钛工业在新材料、新技术、新设备、新应用方面的进展,提供了市场需求与发展前景方面的相关信息,并对中小型钛加工企业的发展提出建议。     

Advances in titanium metal injection molding

The approaches to production of titanium powder injection molded parts are reviewed. Historically, oxygen levels have been too high for structural use (particularly with the Ti-6Al-4V alloy). However, recent advances in starting powders, binders and sintering facilities now allow oxygen levels in the Ti-6Al-4V alloy to be controlled to about 0.2 wt.% oxygen. This should result in significant expansion of the titanium PIM market place into aerospace, automobiles, surgical instruments, dentistry, communication devices (such as computers and cell phones), knives and guns. __________ Translated from Poroshkovaya Metallurgiya, Vol. 46, No. 5–6 (455), pp. 118–125, 2007.     

提高硬质合金工具使用寿命的研究

通过改变硬质合金剩余应力类型和状态，改善了硬质合金的性能，提高了硬质合金工具的使用寿命。     

95W-Ni-Fe 合金工艺缺陷的 SAM 和 XPS 分析

藉助扫描俄歇探针、Ｘ射线光电子谱等分析了９５Ｗ－Ｎｉ－Ｆｅ合金碳污染和氧化的本质。发现，碳污染试样中碳的化学状态主要为石墨，少量为铁或镍的有机化合物，这些物质的界面富集使材料脆化。钨合金氧化后，氧大量富集于钨／粘结相界面，使沿着该界面的断裂更容易发生。     

ZT3钛合金标准物质均匀性的检验

本文采用方差分析法和平均值一致性检验法来检验钛合金标准物质的均匀性,通过铝和硅两个元素的计算,证明该标准物质均匀度良好,数理统计在分析化学中逐步在应用,这将为今后标准物质的研制开辟新的途径。     

铜及铜合金中铜量分析方法综述

现行标准ＧＢ５２３１－ＧＢ５２３５－８５中共有８８个合金牌号要求测定铜量，其含铜量从５３％到９９．９７％以上。本文就ＩＳＯ、ＧＢ和主要铜材生产企业分析规程中铜量测定方法，结合本人的实践经验进行综述。     

激光熔覆用钴基合金粉末的研究

对激光熔覆用WFLC－11钴基合金粉末的激光熔覆工艺和熔覆层性能进行了研究，获得了WFLC－11钴基合金粉末激光熔覆层厚度与最小比能量关系曲线和熔覆层的组织、高温硬度等性能数据，为选择和使用WFLC－11钴基合金粉末提供了依据。