目标追求的入世和出世对框架效应的影响

采用目标追求的入世、出世量表筛选出入世水平高组(70名)和低组(72)大学生,出世水平高组(68名)和低组(71名)大学生,探讨不同入世、出世水平大学生在奖学金申请、选修课和求职应聘三种决策任务领域上的框架效应及其在性别上的特点。结果发现:(1)不同出入世水平大学生在决策任务上的框架效应特点不同,入世水平高分组和低分组、出世水平高分组和低分组在奖学金申请问题上均出现了经典的框架效应;(2)在奖学金申请问题上,男性被试和女性被试的选择出现了明显的经典的框架效应。     

狭义相对论与钟慢效应关系再认识--纪念狭义相对论创立110周年

从爱因斯坦建立狭义相对论的科学方法与狭义相对论理论的逻辑构成入手,综合运用A· P·弗伦奇在国际著名的改革教材“美国麻州理工学院物理学导论丛书”第二卷《狭义相对论》中的研究观点和闵可夫斯基的四维时空理论,阐明狭义相对论与钟慢效应之间的正确关系。     

Effects of laser beam energy and incident angle on the pulse laser welding of stainless steel thin sheet

This paper reports an experimental study of laser spot welding on stainless steel sheets. A pulsed Nd:YAG laser was used to weld the stainless steel specimen in the range of laser energy 0.6–1.2 J and incident angle 30–75° (the angle of the laser beam incident direction to the sheet surface). Metallography was applied to measure the cross-sectional size and shape of the welded spot. From the experimental results, it is found that as the laser energy increases, the penetration depth, bead length, and bead width of the welded spot increase. As the laser incident angle increases, the penetration depth and the bead width increase while the bead length decreases. The results illustrate that the shape and size of the welded spot depend not only on the laser energy, but also on the incident angle of laser beam.     

Atomic force microscopy study of biaxially oriented polypropylene films

Atomic force microscopy (AFM) uses a very sharp pointed mechanical probe to collect real-space morphological information of solid surfaces. AFM was used in this study to image the surface morphology of a biaxially oriented polypropylene film. The polymer film is characterized by a nanometer-scale, fiberlike network structure, which reflects the drawing process used during the fabrication of the film. AFM was used to study polymer-surface treatment to improve wettability by exposing the polymer to ozone with or without ultraviolet (UV) irradiation. Surface-morphology changes observed by AFM are the result of the surface oxidation induced by the treatment. Due to the topographic features of the polymer film, the fiberlike structure has been used to check the performance of the AFM tip. An AFM image is a mixture of the surface morphology and the shape of the AFM tip. Therefore, it is important to check the performance of a tip to ensure that the AFM image collected reflects the true surface features of the sample, rather than contamination on the AFM tip.     

国外武器装备电磁环境适应性试验与评价技术及能力发展综述

武器装备的电磁环境适应性已成为制约武器装备能打仗、打胜仗的一个重大问题;西方军事强国非常重视面向复杂电磁环境的武器装备试验与评价技术研究和能力建设,通过相关投资计划的长期持续投入,支持突破其中的关键技术、方法,以及构建相应的试验与评价设施能力;文章从标准规范和研制程序、技术方法、试验设施、科研和能力建设投资计划等几方面综述了国外武器装备复杂电磁环境适应性试验与评价技术和能力发展情况,并在此基础上,提出了对我国武器装备电磁环境适应性试验与评价能力的发展建议.     

Epsilon-near-zero or mu-near-zero materials composed of dielectric photonic crystals

We theoretically demonstrate that at certain frequencies two-dimensional dielectric photonic crystals （PCs） may be regarded as either epsilon-near-zero or mu-near-zero materials. We show that the transmission through a slab of such materials upon normal incidence is normally non-unity and decays with slab thickness. However, when the incident angle increases slightly, the transmittance experiences a dramatic increase due to the Brewster effect. The combination of the tunneling and resonance effects makes such materials good candidates for almost perfect bending waveguides and cloaking in waveguides. The zero index also enables applications of focusing and directive emission. At last, the distinction between the single-zero and double-zero media is discussed. In all of the above results, the numerical simulations perfectly match with theoretical predictions from the effective medium analysis.     

宽带钢厚度模型的研究与优化

介绍莱钢宽带钢厚度模型的优化,以改善板形,提高控制精度.     

一种消除阶梯效应的图像分解新模型

针对TV-L1分解模型在进行图像分解时所得到的结构部分有阶梯效应的问题,本文提出一种改进的图像分解模型即GJTV-L1模型。该模型首先得到结构部分的切向量场,由切向量场可得到结构部分的法向量场,然后拟合法向量场得到重构图像,即结构部分。通过仿真实验,验证了GJTV-L1模型和算法的合理性及有效性。     

Kelvin Probe measurements of polymer coated gold substrates: Mechanism studies

The origin of work-function changes induced in polymer/metal structures (polyacrylic acid (PAA), ammonium and sodium polyacrylate) upon ammonia exposure is studied. To understand and explain the mechanism systematic measurements of uncoated and polymer coated metals are performed in Kelvin Probe (KP) setups. Additional data have been acquired through gravimetric and electrochemical experiments (cyclic voltammetry (CV)). The results obtained confirm that the field effect sensitive processes are taking place at the metal/polymer interface and allow their modelling. The intrinsic sensitivity of metallic samples upon ammonia exposure is influenced by the presence of coating polymers, by their ability to sorb water and to keep the metal surface wet or dry.     

基于UML可适应的教学考评系统分析与设计

该文给出了UML的概念与要点,应用UML对教学考评系统进行了建模。给出了系统的用例模型、整体结构模型、静态模型、动态模型,并分析了模型对教学考评变化的可适应性。