暴雨洪水流域系统随机模拟(研究之三)

本文提出的移置特大暴雨的不连序序列的随机插补方法,以及利用W—H逆变换法将偏态暴雨序列转为正态序列和随机扣除模拟的暴雨过程损失量等方法,基本是可行的,对提高模型的代表性、稳定性和实用性有重要作用。     

The Effect of the Charge Fluctuation of Dust Parti-cles on Ion-acoustic Wave Excited Through Ionization Instability

The effect of the charge fluctuation of dust particles on ion acoustic wave (IAW) excited through ionization instability was investigated. The hydrodynamic equations and linear time-dependent perturbation theory served as the starting point of theory, by which the dispersion relation and growth rate of the IAW were given. By comparing the results with the case of constant dust charges, it was found that the charge fluctuation of dust particles reduces the instability of the wave mode.     

随机徐变应力影响下重力坝时变可靠度初探

由于重力坝的随机温度场以及随机徐变应力场均为非平稳随机过程，由此所涉及的结构可靠度是非平稳向量随机过程非线性组合的时变可靠度．本文计入重力坝徐变应力场和混凝土强度随机性的影响，将时变可靠度的数值解法与随机有限元法相结合，模拟施工过程，对一典型重力坝的时变可靠度进行了计算，得出了一些有益的结论．     

悬沙中D〉0．06mm粗粒的粒析级配组成及其改正方法

本文首先简述Ｄ＞０．０６ｍｍ泥沙的粒析沉降特性及其粒径偏粗的原因。继之对悬沙中粒径大于０．０６ｍｍ的粒析级配组成机理，及级配组成不同对标准粒径Ｄｂ与粒析粒径ＤＬ关系的影响进行了详细研究。在以上研究工作的基础上，开展了Ｄｂ与ＤＬ的比较试验，得出了粗、中、细型悬沙的Ｄｂ～ＤＬ关系和对ＤＬ的改正方法。     

一类Boltzmann & Darwin混合寻优策略的收敛特性研究

基于文［１］提出的求解组合最优化问题的Ｂｏｌｔｚｍａｎｎ＆Ｄａｒｗｉｎ混合寻优策略，本文进一步分析研究了Ｂｏｌｔｚｍａｎｎ＆Ｄａｒｗｉｎ混合寻优策略非时齐情形下的收敛特性，包括全局收敛性和收敛速度。结果表明，Ｂｏｌｔｚｍａｎｎ＆Ｄａｒｗｉｎ混合寻优策略的收敛特性优于模拟退火（ｓｉｍ－ｕｌａｔｅｄ ａｎｎｅａｌｉｎｇ）方法的收敛特性。     

具有减少辨识参数的随机多变量极点配置自适应控制器

本文提出了一种新的限制输出个数减少随机多变量自适应控制中辨识参数的方法，并给出了减少辨识参数的极点配置自适应算法。虽然采用ｎ个输入１个输出的减少辨识参数的模型来设计控制器，但所提出的控制器能够保证被控系统的几个输出跟踪参考输入信号，仿真结果表明，所提出的方法是成功的。     

Issues in nonlinear stochastic grey box identification

Grey box identification refers to the practice of identifying dynamical systems in model structures exploiting partial prior information. This contribution reviews a method for stochastic grey box identification and surveys experiences and lessons of applying it to a number of industrial processes. Issues to be addressed include advantages and costs of introducing stochastics into the model, the question of what contribution must be expected from the model designer as opposed to what can be formalized in computer algorithms, and an outlook on future plans to resolve present shortcomings.     

高透明耐冲击聚氯乙烯接枝聚合研究

研究高透明耐冲击聚氯乙烯接枝聚合工艺，讨论了加料顺序、复合分散体系以及采用聚集粒子乳液、并用碱性物质调节其ｐＨ值等对接枝聚合物性能的影响，确定了接枝聚合最佳工艺条件。     

泥浆制备中工艺改造的研究

根据室条件下粉磨试验结果，发现球磨过程中筛上料变化存在的突变范围，提出两次加料一次加水可改变泥浆颗粒分布，并找出适宜的加料种类与时间。另外给予测粒度分布提供了宝贵的试验基础数据。     

Direct preparation of particles from liquid suspension for ESEM or SEM analysis

A simplified method for the preparation of particles from liquid suspensions has been developed. Particles are deposited directly on carbon planchets for rapid analysis by environmental scanning electron microscopy or by conventional scanning electron microscopy after an additional drying step. This is accomplished by filtering the liquid through thin carbon planchets. Three different grades of graphite were investigated for their suitability as the source material for these planchets. The high quality isomolded graphite is recommended for the filtration and direct observation of particles by electron microscopy. This technique is demonstrated for particles in hydraulic fluid and aquatic suspended particulate material from a natural water source.