电弧炉采用石灰石单渣冶炼工艺的研究

采用优质石灰石取代质量差的白灰 ,进行了单渣电弧炉熔炼。结果表明 ,钢水成本降低 ,钢水质量提高 ,取得了良好的效果。     

变压器事故原因分析

通过分析一次变压器事故的原因。指出变压器实际运行中存在的问题。并结合自己的工作经验提出科学的改进建议。     

一种基于TDA16846的新型有源功率校正电路设计

介绍一种由集成电路芯片TDA16846完成的利用电荷泵(Charge Pump)实现的有源功率因数校正(APFC)技术。这种APFC电路的突出优点就是结构简单,通过对常规缓冲电路进行合理调整,可以很容易变成具有PFC功能的高性能开关电源。分析了APFC的工作原理,应用专用芯片TDA16846设计了电路图,并阐述了主要元件的功能。经实验证明,推荐电路设计合理,应用前景广阔。     

A Novel Segmentation and Feedback Model for Resolving Contention in Optical Burst Switching

A novel segmentation and feedback model (SFM) applied to resolve contention is proposed. Simulation and performance analyses show that the SFM effectively avoids contentions in optical burst switching (OBS). The long delay time of deflection routing and the immature technology of wavelength converters and optical buffers are not deployed in the SFM. The SFM does not only realize fast switching but also allows preemption by higher priority bursts.     

钻机绞车滚筒体的窄间隙埋弧焊

针对钻机绞车滚筒体采用手工电弧焊工人劳动强度大、焊接效率低、质量不稳定及返修率高等问题,研制了钻机绞车滚筒体窄间隙埋弧焊专机。该专机由ESAB—A2埋弧焊电源和焊接小车、窄间隙焊头、滚轮架、防窜装置、旋转地线夹、三维焊接工作台、焊剂自动回收机组成。使用表明,采用该焊机焊接的滚筒体焊缝质量完全符合设计要求,合格率100%,焊接效率比原来提高6倍。每件滚筒体的焊接可降低人工成本约80%。     

铸造Ti—0.2Pd合金SF—1000双级风机叶轮的研制

Ｔｉ－０．２Ｐｄ合金ＳＦ－１０００双级风机叶轮是大型盐酸再生设备的主要部件，采用整体铸造方法制造，无论在技术上还是经济上都是十分有利的。本文主要介绍采用加工石墨，铸铁组合型，真空电弧凝壳熔炼铸造工艺，成功地研制出整体铸造风机叶轮。     

Reconstruction of a discontinuous function from a few fourier coefficients using bayesian estimation

The goal of this paper is the application of spectral methods to the numerical solution of conservation law equations. Spectral methods furnish estimates of the firstn Fourier coefficients of the solution. But since the solutions of conservation law equations can have discontinuities, the estimate of the solution by summing the firstn terms of the Fourier series will haveO(1/n) error, even if the Fourier coefficients are known to high accuracy. But if the solution could be accurately reconstructed from its Fourier coefficients, spectral methods could be used effectively in these problems. A method for doing this is to assume a probability distribution for functions. Functions which are smooth away from the discontinuity are assumed to be likely, and those which are not smooth away from the discontinuity are assumed to be unlikely. Then a reconstruction algorithm is chosen by minimizing the expected error over all algorithms. It is possible to put the smoothness assumptions mentioned earlier into an infinite-dimensional Gaussian probability distribution, and then the minimum-error algorithm is well-known and fairly simple to construct and apply. If the Fourier coefficients of the reconstructed function are known exactly, then this approach gives very good results. But when used with Fourier coefficients obtained from a spectral approximation to Burgers' equation, the results were much less impressive, probably because the coefficients were not known very accurately. It is possible to construct filters that reconstruct a function using Legendre or Chebyshev coefficients for information instead Fourier coefficients. It is found that the performance of these filters is similar to the Fourier case.     

B—ISDN宽带UNI信令点到多点配置的实现

本文根据ＩＴＵ－Ｔ最新的Ｑ．２９７１协议，以及笔者所从事的实际课题，提出一整套Ｂ－ＩＳＤＮ第三层ＵＮＩ信令的软件实现策略，其特点是能同时满足用户对点到点以及点到多点广播这两种通信方式的要求，而且可以动态配置。     

ATM技术浅析

网络通信技术正在迅猛地发展，各种各样的高速通信技术如雨后春笋，其中ＡＴＭ作为一种信元换技术，具有以兆或千兆级速率传送话音、数据和图象的能力，它在网络通信技术中占有特别重要的地位。本文介绍了ＡＴＭ技术的产生、基本特点、体系结构、在ＢＩＳＤＮ中的作用、存在的问题以及发展前景。     

数字程控交换机与专网中的多媒体通信

本文以一个多媒体通信应用VISIT为实例,介绍了多媒体通信在数字程控交换机及专网中的应用情况。