An adaptive tracking problem for a family of retarded time-delay plants

Most of the existing switching control techniques are developed specifically for finite-dimensional linear time-invariant (LTI) systems. In many practical applications, however, it is essential to take time delay into consideration in the modelling as the control system can be highly sensitive to delay. In this paper, a multi-model switching control algorithm is proposed for retarded time-delay systems. It is assumed that the plant is represented by a family of known multi-input multi-output, observable, LTI models with multiple delays in the states, and that corresponding to each model in the known family, there exists a high-performance finite-dimensional LTI controller. In addition, it is supposed that a bound on the magnitude of the external inputs and disturbances is available. It is then shown that the proposed switching controller can stabilize the uncertain system, and that under some mild conditions, output tracking can be achieved in the given problem setting. Copyright © 2007 John Wiley & Sons, Ltd.     

The effects of recent practice on task switching.

Four experiments investigated the effect of recent selective practice on the cost of switching between 2 tasks afforded by letter-digit pairs: alphabet arithmetic and shape comparison. Experiments 1 and 2 found a greater cost associated with switching to the more recently practiced task: evidence that task-set inertia contributes to switching costs. Experiment 3 found this effect to be limited to trials on which a recently trained stimulus followed another such stimulus: a result problematic for all current theories of task-set priming. Experiment 4 showed that the effect of recent practice was eliminated by active preparation for a task switch: It appears that endogenous task-set preparation reduces the effects of task-set inertia. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

0.25μm CMOS千兆以太网发送器设计

分析了千兆以太网体系结构,给出了符合IEEE 802.3z标准中1000BASE-X规范的发送器电路结构,并采用TSMC 0.25 μm CMOS 混合信号工艺设计了符合该规范的高速复接电路和锁相环时钟倍频电路.芯片核心电路面积分别为(0.3×0.26)mm2和(0.22×0.12)mm2.工作电压2.5 V时,芯片核心电路功耗分别为120 mW和100 mW.时钟倍频电路的10倍频输出时钟信号频率为1.25 GHz,其偏离中心频率1MHz处的单边带相位噪声仅为-109.7 dBc/Hz.在驱动50 Ω输出负载的条件下,1.25 Gbit/s的高速输出数据信号摆幅可达到410 mV.     

250W带功率因数校正整流电源模块的研制

功率因数校正技术越来越成为电源行业研究的热点。文中介绍了适用于雷达等设备的250W带功率因数校正整流电源模块的设计，分析了其中升压电感器设计、主开关管保护、控制电路消振、散热设计和表面贴装等关键技术，完成了实验研究，获得了满意的试验结果。     

大功率开关电源的设计与实现

介绍了开关电源设计中需要考虑的几个基本问题,包括频率的确定、最大占孔比Dm的确定、逆变变压器的设计和开关功率管的选择,并以一种1 kW的PWM大功率半桥式开关电源为例,详细介绍实际的开关电源设计方案,并给出了实验结果.     

动态多目标决策问题的灰色分析方法

将用于固定时间截面下静态多目标决策的灰色关联理论推广到动态情形，引入局部理想最优效果和整体理想最优效果的概念，提出一种新型的动态多目标决策问题的灰色关联模型，并通过算例说明该方法的合理可行性。     

基于频率采样技术的FIR数字滤波器优化设计

本文提出了一种FIR数字滤波器满意优化设计方法，将滤波器过渡带样本值作为优化变量，通过设计通带、过渡带和阻带性能指标满意度函数和综合满意度函数，构造出满意优化模型，并用本文提出的新量子遗传算法搜索满意解，FIR高通和带阻数字滤波器的设计结果表明，采用满意优化方法设计的FIR滤波器的性能优于传统方法。     

基于随机相位误差Tikhonov分布的MC-DS-CDMA系统性能分析

本文针对工作于慢变频率选择性Rayleigh衰落信道中的部分相干的MC-DS-CDMA系统，基于随机相位误差的Tikhonov密度分布提出了误码率上边界的一种分析方法。仿真结果表明，随着环路信噪比的增加，相位误差损耗所产生的系统误码率性能损失变得越来越小，当环路信噪比高于系统信噪比(Eb/N0)20dB时，系统误码率性能损失小于0．2dB。在MC-DS-CDMA系统中，由于能用频率分集取代路径分集，因而接收机结构更易实现。     

Optimization of support positions to maximize the fundamental frequency of structures

In this paper, the position optimization of simple supports is implemented to maximize the fundamental frequency of a beam or plate structure. Both elastic and rigid supports are taken into account. First, the frequency sensitivity with respect to the movement of a simple support is derived using the discrete method. By means of the shape functions of the finite element method, closed‐form sensitivity formulations are developed straightforwardly. Then, a heuristic approach, called evolutionary shift method, is presented for optimizing support positions with a fixed grid mesh scheme. Based on the design sensitivity analysis, the support with the highest efficiency is shifted in priority along the elementary edges with the interval (step) of the elementary size. To facilitate the convergence of the process, the interpolation technique is employed to evaluate the solution more accurately. Finally, three numerical examples are presented to demonstrate the validity of the sensitivity analysis and the effectiveness of the optimization method. Copyright © 2004 John Wiley & Sons, Ltd.     

幅频特性的数学分析

根据数控装置检测系统中传感器信号电路工作要求,以共射电压放大电路为例,分别考虑耦合电容、旁路电容、结间电容和分布电容对不同信号频率的作用,分析了电路的低频特性和高频特性,给出了上下限截止频率的解析式.由此得出,电路其他参数一定时,在低频段,下限截止频率与耦合电容、旁路电容成反比,在高频段,上限截止频率与等效输入输出电容成反比,从而为传感器系统设计提供理论依据.