Early detection of ageing in solder joints through laser probe thermal analysis of the peltier effect

We have recently developed an optical contactless method for testing the quality of solder joints during accelerated thermal cycling ageing processes.¹ The method was based upon the measurement of the dynamic thermal behaviour of the joint to short bursts of Joule heating. It has proved to be efficient in revealing the formation of cracks at the lead-solder interface. We present a method to evaluate ageing at a much earlier stage in the cycling process. We have observed in earlier work,¹ that before cracks appear, structural changes occur in the solder at the lead-solder interface. The thermal response of the solder joint is recorded over time to a Peltier heat perturbation produced by flowing a current pulse through the interface where structural changes occur. The key point in this method is to discriminate the Peltier effect from the Joule thermal response because both effects generate heat. The variation of the early Peltier response in the thermal cycling ageing tests is seen as a quantitative signature of the structural changes in the lead-solder interface.     

Evaluation of the reactivity of titanium with mould materials during casting

A methodology for evaluating the reactivity of titanium with mould materials during casting has been developed. Microhardness profiles and analysis of oxygen contamination have provided an index for evaluation of the reactivity of titanium. Microhardness profile delineates two distinct regions, one of which is characterised by a low value of hardness which is invariant with distance. The reaction products are uniformly distributed in the metal in this region. The second is characterised by a sharp decrease in microhardness with distance from the metal-mould interface. It represents a diffusion zone for solutes that dissolve into titanium from the mould. The qualitative profiles for contaminants determined by scanning electron probe microanalyser and secondary ion mass spectroscopy in the as-cast titanium were found to be similar to that of microhardness, implying that microhardness can be considered as an index of the contamination resulting from metal-mould reaction.     

国有企业党风廉政建设中的问题及治理研究

剖析国有企业党风廉政建设中的突出问题。提出“推进国有企业党风廉政建设运用市场经济原则经营运作是重要途径;加强对企业经营管理者的监督管理是关键;完善法人治理结构、建立企业内部权力制衡机制是重要基础”的观点。     

影响磁式TIMS测量准确度的主要因素

测量准确度是热电离质谱 ( TIMS)的重要指标 ,对于使用年限较长的 TIMS,造成准确度下降的因素很多 ,分析判断更复杂。为了准确、系统地了解其中的主要原因 ,本文从 TIMS的基本工作原理出发 ,对影响测量准确度的主要因素 ,如离子束的角分散、能量分散、电磁场稳定性、多接收器的形变和位移、电子倍增器的衰老和放大器增益的差异等及相应的解决办法作了较深入的探讨     

基于B点磁探针膛内电枢电弧长度与速度分布测量的计算机控制系统的研究

基于B点磁探针的测量原理，建立了电磁轨道炮膛内三维等离子体电枢电弧长度和电弧运动速度测量的数学模型，通过对该模型的分析给出了用于测量膛内电枢电弧长度和运动速度分布的相应推论。开发了用于测量膛内等离子体电枢电弧长度和速度的多通道计算机控制诊断系统，并进行了相应的试验研究。     

小剂量辐照小鼠胸腺细胞膜流动性的变化

报道了以茈为荧光探针,探讨小剂量~(60)Co γ射线照射后小鼠胸腺细胞膜流动性的变化。结果表明,剂量在0.25-1.00Gy范围,胸腺细胞膜流动性降低与剂量之间呈明显线性关系。从0.50Gy起,辐照组荧光强度比值I_1/I_2与I_3/I_2与对照组的比较存有显著差异(P<0.05)。提示淋巴细胞膜流动性的变化可作为小剂量辐照早期效应的敏感指标。     

Structural properties of 0.65Pb(Mg1/3Nb2/3)O3–0.35PbTiO3 relaxor ferroelectric thin films on SrRuO3 conducting oxides

Coating of 0.65Pb(Mg_1/3Nb_2/3)O₃–0.35PbTiO₃ (PMN–PT) relaxor ferroelectrics by a sol–gel method is followed by growth of epitaxial SrRuO₃ (SRO) metallic oxide electrodes on SrTiO₃ (STO) single-crystal substrate by pulsed laser deposition. High-quality PMN–PT films on SRO with preferred growth orientation were successfully fabricated by controlling the operation parameters. Structural properties of relaxor ferroelectric PMN–PT thin films on SRO/STO substrates have been studied by X-ray diffraction (XRD), transmission electron microscopy (TEM) and atomic force microscopy (AFM). In-plane and out-of-plane alignments of the heterostructure are confirmed and the structural twinning of the materials are also revealed.     

大角度倾转法在碳化物研究中的应用

蠕变过程中碳化物形貌，类型，数量和分布状态的变化直接影响着材料的高温性能，因而在材料的蠕变得到了广泛的重视，介绍了一种在碳膜萃取复型样品上利用Ｈ－８００透射电子显微镜的双倾样品台进行了大角度倾转，来观察碳化物形貌并鉴定其类型的试验方法。     

IR spectroscopic study of Pt/Kl zeolites using adsorption of CO as a molecular probe

FTIR spectra of CO adsorbed on Pt/KL catalysts show that the relative band intensities and the total dispersion markedly depend on the catalyst preparation method (ion exchange, incipient wetness impregnation or co-impregnation with KCl). The CO stretching frequency of the dominant band for linear CO is shifted to higher wavenumbers, parallel with the proton concentration in the reduced catalyst, which is derived independently from the intensity of the IR bands of the OH groups. The results are in accordance with the model that electron-deficient platinum particles are platinum-proton adducts.On leave from: N.D. Zelinsky Institute of Organic Chemistry, Academy of Sciences, Moscow, USSR.     

Interaction between bubbles and fibre optic probes in a bubble column

Spherical bulb fibre optic probes, developed and applied for bubble characterization in a bubble column and a slurry bubble column at high temperature, were investigated. The principle of operation of these new optical fibre probes is based on the difference in refractive indices between the gas and the liquid phases. The interaction between the gas bubbles and the fibre optic probes in a bubble column was studied using photographic techniques. The first objective of these experiments was to study the response of the sensors upon contact with gas bubbles of various sizes. The second objective of this study was to establish, under controlled situations, the optical probe bubble detection performance and ability for local quantitative measurements of the bubble rise velocity and the gas hold-up.