Synthesis,characterization, and thermal properties of phosphorus‐containing,wholly aromatic thermotropic copolyesters

A series of phosphorus‐containing, wholly aromatic thermotropic copolyesters from acetylated 2‐(6‐oxide‐6H‐dibenz〈c,e〉〈1,2〉oxa phosphorin‐6‐yl)‐1,4‐dihydroxy phenylene, p‐acetoxybenzoic acid, terephthalic acid, and isophthalic acid were prepared by melting polycondensation. The structure and basic properties of the polymers, such as the glass‐transition temperature (T_g), melting temperature (T_m), thermal stability, crystallinity, and liquid crystallinity, were investigated with Fourier transform infrared, elemental analysis, differential scanning calorimetry (DSC), thermogravimetric analysis, wide‐angle X‐ray diffraction, and hot‐stage polarizing optical microscopy. The copolyesters had relatively high T_g values ranging from 183 to 192°C. The T_m values obtained from DSC curves for samples P‐20 and P‐25 were 290 and 287°C, respectively (where the number in the sample name indicates the molar fraction of the phosphorus‐containing monomer in the reactants). The initial flow temperatures of other samples observed with hot‐stage polarizing microscopy were 271–290°C. The 5% degradation temperatures in nitrogen ranged from 431 to 462°C, and the char yields at 640°C were 41–52%. All the copolyesters, except P‐40, were thermotropic and nematic. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1278–1284, 2002     

Studies on film potentiometric stripping analysis: effects of electrochemical parameters

Film potentiometric stripping analysis (PSA) is a novel method for concentrating the test ion directly on a glassy carbon electrode with subsequent stripping by a chemical oxidant, the redissolution step being followed by a chronopotentiometric sequence. The electrochemical parameters governing both preconcentration and redissolution steps are studied on a rotating disk electrode: experimental results are compared with the theoretical developments recently published. Except for the influence of rde rotation rates on each step and on analytical parameters, experiments and theory are in agreement. Discrepancies concerning the rotation rate effects are studied by potentiostatic coulometry and voltammetry measurements in regard to the preconcentration step: the rotation rate effects are based on the physical behaviour of the rde. Routine analysis is carried out using film PSA, Pb(II) as the test ion and Fe(III) as oxidizing agent, in perchlorate medium.     

不同预处理方法对玉米芯成分的影响

对辽宁康平和湖北襄樊产的两种玉米芯进行了原始成分分析,并分别用1%氢氧化钠、10%氨水、热水、氢氧化钠-过氧化氢溶液、1%硫酸进行处理,然后再进行成分测定,比较了不同的处理方法对玉米芯中纤维素、戊聚糖、木质素含量的影响。     

PMMA‐modified divinylester/styrene resins: Phase diagrams and morphologies

Binary and ternary experimental cloud‐point curves (CPCs) for systems formulated with a low molar mass synthesized divinylester (DVE) resin, styrene (St), and poly(methyl methacrylate) (PMMA) were determined. The CPCs results were analyzed with the Flory–Huggins (F‐H) thermodynamic model taking into account the polydispersity of the DVE and PMMA components, to calculate the different binary interaction parameters and their temperature dependences. The St‐DVE system is miscible in all the composition range and down to the crystallization temperature of the St; therefore, the interaction parameter expression reported for a higher molar mass DVE was adapted. The interaction parameters obtained were used to calculate the phase diagrams of the St‐PMMA and the DVE‐PMMA binary systems and that of the St‐DVE‐PMMA ternary system at three different temperatures. Quasiternary phase diagrams show liquid–liquid partial miscibility of the St‐PMMA and DVE‐PMMA pairs. At room temperature, the St‐DVE‐PMMA system is miscible at all compositions. Final morphologies of PMMA‐modified cured St‐DVE materials were generated by polymerization‐induced phase separation (PIPS) mechanism from initial homogeneous mixtures. SEM and TEM micrographs were obtained to analyze the generated final morphologies, which showed a direct correlation with the initial miscibility of the system. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4539–4549, 2006     

Cross-evaluation-based weighted linear optimization for multi-criteria ABC inventory classification

Multi-criteria ABC inventory classification (MCIC), which aims to classify inventory items by considering more than one criterion, is one of the most widely employed techniques for inventory control. This paper suggests a cross-evaluation-based weighted linear optimization (CE-WLO) model for MCIC that incorporates a cross-efficiency evaluation method into a weighted linear optimization model for finer classification (or ranking) of inventory items. The present study demonstrated the inventory-management-cost effectiveness and advantages of the proposed model using a simulation technique to conduct a comparative experiment with the previous, related investigations. We established that the proposed model enables more accurate classification of inventory items and better inventory management cost effectiveness for MCIC, specifically by mitigating the adverse effect of flexibility in the choice of weights and yielding a unique ordering of inventory items.     

Discourse cues to deception in the case of multiple receivers

Behavioral cues to deception are instrumental in detecting deception. As one of the primary sources of deception behavior, text has been analyzed at the level of sub-sentence or message but not the discourse of interaction. Additionally, empirical studies on cues to deception in the case of multiple receivers remain nonexistent. To fill these voids, we propose a discourse framework and six hypotheses about deception behaviors in a multi-receiver environment. The deception behaviors are operationalized by discourse features based on an analysis of real-world data. The results of statistical analysis validate the efficacy of discourse features in discriminating deceivers from truth-tellers.     

生物质中元素分布特征的聚类分析研究

测定了稻草秆、小麦秆、玉米秆、棉花秆、大豆秆、玉米芯、花生壳和柳树、松树、桦树、杨树、杉树 1 2个农业生物质和林业生物质种类 2 7个样品中主要元素 K,Ca,Na,Mg,Al,Fe,P和痕量元素 As,Cr,Co,Cu,Cd,Mn,Mo,Ni,Pb,Ti,Zn,V,Si,Ba,Be,Se,Sb,Ge,Hg的含量 ,并用SPSS聚类分析法分别进行了 R型和 Q型聚类研究 ,对这些元素在生物质中的分布特征进行了研究 .结果显示 :杨木、杉木和桦木与松木和柳木归成一大类 ,经济类作物黄豆秆和棉花秆分别归类后又归入一大类 ;农业生物质稻草秆和小麦秆、玉米秆被归入一类 ;虽然 2 7种生物质样品分别取自我国东北、华东、华北和西南地区 ,在地理位置上相距极远 ,但样品聚类谱系图表明 ,元素的分布特征与生物质的种类的关系显著 ,与产地的关系不明显 ,即元素的分布特征受种类的影响大 ,而受生长环境、气候、土壤条件的影响小 .     

直链烷基苯生产工艺及市场分析

通过对大量资料的收集与整理，简述了全球直链烷基苯的生产工艺及应用情况，重点介绍了目前全球最新的直链烷基苯生产工艺——固体酸烷基化生产工艺(DETAL工艺)。同时对全球范围内直链烷基苯的供应与需求情况进行了介绍，并对直链烷基苯的未来市场进行了分析与预测。     

农药残留分析样品前处理技术新进展

介绍了近年来农药残留样品前处理技术的新进展,并对此进行了评述和展望。     

胶带机拉紧装置的计算分析

从胶带机三种基本拉紧装置的特点出发，考虑可能出现的工况，编制计算机程序，全面地分析了三种拉紧装置对选用胶带的影响，同时对拉紧行程的范围也加以讨论。