国内外钛矿和富钛料生产现状及发展趋势

本文概述了世界钛矿物的地理分布和富钛料的生产情况,并对富钛料的生产发展前景进行了预测,介绍了遵义钛公司为获取较好的技术经济指标,提高钛渣生产的技术装备水平,对新建钛渣炉的设计进行了较大的创新。     

La3+掺杂对纳米TiO2微观结构及光催化性能的影响

以钛酸丁酯和氯化镧为原料,采用溶胶-凝胶法制备了La3+掺杂TiO2纳米粉体,讨论了不同掺杂浓度、不同热处理温度的样品催化降解刚果红染料实验中的光催化活性,并通过X射线衍射(XRD)、透射电镜(TEM)分析了La3+掺杂TiO2样品的相组成、晶胞参数和晶粒大小对光催化活性的影响.结果表明:La3+掺杂能够显著提高TiO2粒子的光催化活性,最佳掺杂浓度为100∶3 0,最佳热处理温度为600℃;La3+掺杂的TiO2的相组成是影响光催化活性的决定性因素;晶格膨胀程度及晶粒大小对光催化活性的影响,主要是在相组成相同或相近时才体现得比较明显.     

漫谈钛合金在舰船上的应用

钛合金优良的耐海水腐蚀性能、高的比强度、无磁性等特点,使其在船用领域大有潜力可为,我国的船用钛合金经过近40年的研究开发,基本能满足舰艇不同强度级别的需求,在舰船上应用具有明显的社会效益和经济效益,值得进一步应用推广。本文介绍了国内外舰船用钛合金的开发及应用情况。对钛合金在鱼雷发射水缸、高压气瓶、一回路危急冷却器、声扫雷具、二回路泵、阀及管系、声纳导流罩、螺旋桨等方面的应用作了重点介绍。     

Research on the Distant Hybrids of Wheat Obtained via Low-Energy Ion-Beam Implantation

Abstract The whole DNA of soybean was implanted into four varieties of wheat of Zhongyu5, Huaiyin 9628, Wenyou 1, Jimai 5 respectively via ion-beam mediation. There were 5 plantsobtained whose protein content was higher than 18.5%, the highest one was 21.44%. There were 3plants obtained whose protein content was lower than 11.5%, the lowest one was 10.96%. We cansee that the whole DNA of soybean transformed into wheat via ion beam implantation can inducethe increase in wheat protein content dramatically. The result also shows that the transformationefficiency of different gene types of wheat receptor varies greatly that the implanting time has acertain effect on the efficiency of transformation.     

Transport properties in a mixed inorganic ion exchanger—zirconium phosphomolybdate—in comparison to its single salt counterparts

Amorphous inorganic ion exchangers zirconium phosphate, zirconium molybdate and zirconium phosphomolybdate have been prepared and characterized by elemental analysis, TGA, FTIR and surface area measurements. The protonic conductivity in these materials were determined at various temperatures and compared. It was found that the mixed material zirconium phosphomolybdate showed maximum conductivity at all temperatures.     

Tuning of electronic states in self-assembled InAs quantum dots using an ion implantation technique

We report the tunability of up to 150 meV of the ground state transition of self-assembled InAs quantum dots (QDs) using Mn ion implantation and subsequent annealing. Because of the exciton localization in the quantum dots, the photoluminescence efficiency (T=12K) of the quantum dot transition remains at 80% of its original value after implantation with a Mn dose of 1×10¹³ cm⁻²ions. Strong luminescence still remains at room temperature. At a high implantation dose (1×10¹⁵ cm⁻²) and rapid thermal annealing (700°C for 60s) about 25% of the QD luminescence intensity is recovered at T=12K.     

丙烯酸接枝聚丙烯纤维的结构与性能

本文研究了用化学引发剂引发丙烯酸接枝聚丙烯纤维的某些影响因素。红外光谱分析表明，丙烯酸接枝在聚丙烯大分子链的叔碳原子上。Ｘ－射线衍射和ＤＳＣ分析指出，纤维接枝后结晶度有所增加，接枝前纤维存在的β－变体转化成了α－变体，接枝纤维的吸湿性、离子交换容量和染色性随接枝率增加而增大。接枝纤维的力学性能有所下降。     

The multi-structure of oxidized-reduced tungsten carbide surface(s)

The XPS of bulk tungsten carbide, partially oxidized WC surfaces at 373 and 573 K as well as tungsten trioxide have been reported. Bulk WC has been prepared from WO₃ as a starting material in a mixture of CH₄ (20%) and H₂ (80%) at 1150 K for 4 h, while partially oxidized WC surfaces were prepared by oxygen chemisorption on a clean WC surface at 200 K, then the temperatures were raised to 373 and 573 K respectively. The XPS of a freshly prepared WC reveals the presence of a small amount of WO₃ on the surface and a slightly higher concentration in the bulk. The oxygen-exposed fresh WC surfaces and surfaces treated at temperatures higher than 373 K show the presence of WO₃ in a considerable quantity depending on the length and the treatment temperature. Ar⁺ bombardment of this partially oxidized surface reduces WO₃ to WO₂ and W(0), while WC is partially reduced to W(0). Isomerization reactions of alkanes on oxygen-exposed WC surface occurs in reality on a composite surface structure containing WC, WO₃, WO₂ and elemental W(0).     

Electrodeionisation 3: The removal of nickel ions from dilute solutions

The removal of nickel ions from dilute solutions using a process that combines an ion-exchange bed with electrodialysis has been studied. The main aspects include: the concentration of nickel ions in the diluate, the voltage over the cell and the current density distribution along the ion-exchange bed. The current density distribution provides insight into the state of the bed as it is simultaneously loaded with Ni²⁺ and regenerated with an electric potential difference applied perpendicular to it. A simple model is used to describe the state of the bed and the quantity of nickel removed from it as a function of time. Under specific conditions the precipitation of metal hydroxides is observed in the compartment containing the ion-exchange bed. The results show that hydroxide precipitation is related to the nickel concentration in solution and the electric potential gradient across the bed.