提高太安堆积密度的结晶工艺研究

以季戊四醇经浓硝酸酯化后的粗制太安为原料，在溶课题上重结晶得精制成品太安，讨论了不同溶剂，结晶速度，结晶溶液pH值对太安堆积密度的影响。     

Influence of current density on oxygen transfer in an electroflotation cell

The objective of this work is to study the transfer of oxygen from gas to liquid phase in an electroflotation cell. The measurements were performed in a laboratory scale cell using insoluble electrodes, titanium coated with ruthenium oxide as anode and stainless steel as cathode. The volumetric mass transfer coefficient K _L a, was characterized for clean tap water as liquid phase for different values of current density (J). The global coefficient of mass transfer based on the liquid film, K _L , and the specific interfacial area, a, were characterized. A model which relates K _L a to current density was established. Different evaluation criteria of oxygen transfer in electroflotation process were determined and compared with other aeration process.     

High Density Culture of Porphyridium cruentum in a 42 L Internal Airlift Loop Photobioreactor

1 INTRODUCTION Porphyridium cruentum is a kind of unicellular microalgae, which can live widely in freshwater, marine, brackish, and soil environment[1]. Great attention has been paid to its potential economic value such as the high content of essential high unsaturated fatty acids, especially arachidonic acid (AA) and eicosapentaenoic acid (EPA) (ca 50% in the total fatty acids), ploysaccharides, and synthetic pigments, especially phycoerythrin (PE)[2,3]. During cultivation, the cells…     

板式精馏塔实验性能测试

本文对废液中低浓度乙醇的回收再利用进行了研究,主要对低浓度乙醇精馏过程中的不同实验条件进行了初探,得出了塔釜加热电压,塔釜液浓度,回流比等实验条件与塔顶产品浓度之间的关系,并用计算机绘制了图表,确定一组最优的实验条件。     

3种高电流密度离子膜电解槽的性能对比与介绍

目前离子膜电解槽的发展方向为复极、自然循环、高电流密度、低电耗，伍德诺拉公司BM2．7-Ⅲ型槽、美国西方化学公司ExL^B-65槽、日本氯工程公司BiTAC-858槽即具有这些先进性能。对这3种槽进行了介绍与对比。     

超声波对沉淀二氧化硅的分散解聚研究

研究了超声波对沉淀二氧化硅的分散解聚效果，实验证明，当频率为40kHz，功率密度达到1．8W/cm^2时，沉淀二氧化硅浆料可以获得极佳的分解效果，二氧化硅聚集体小于77．6nm的颗粒数量达98．9％。     

我国化肥催化剂工业现状

全国48家化肥催化剂制造厂总能力为57Kt/a,产量近30kt/a,设备利用率不到50%。平均万吨氨耗催化剂10.36t,高于国外5.60t水平。现生产31个品种203个型号的催化剂中有103种经部级鉴定,但经常使用的约50种。目前化肥催化剂工业水平与国外相比还存在四方面差距。     

Torque Transmission Capabilities of Bonded Polygonal Lap Joints for Carbon Fiber Epoxy Composites

Although carbon fiber epoxy composite materials have excellent properties for structures, the joint in composite materials often reduces the efficiency of the composite structure because the joint is often the weakest area in the composite structure.

In this paper, the effects of the adhesive thickness and the adherend surface roughness on the static and fatigue strengths of adhesively-bonded tubular polygonal lap joints have been investigated by experimental methods. The dependencies of the static and fatigue strengths on the stacking sequences of the composite adherends were observed.

From the experimental investigations, it was found that the fatigue strength of the circular adhesively-bounded joints was quite dependent on the surface roughness of the adherends and that polygonal adhesively-bonded joints had better fatigue strength characteristics than circular adhesively-bonded joints.     

Evaluation of the thermal and mechanical properties of poly(ε‐caprolactone), low‐density polyethylene,and their blends

The thermal and mechanical properties of low‐density polyethylene (LDPE), poly(ε‐caprolactone) (PCL), and their blends were evaluated. Differential scanning calorimetry showed that increasing the PCL content of the blend did not change the LDPE melting temperature, but reduced the crystallinity by up to 16.8%. This behavior was related to interactions between the PCL chains and the crystalline phase of LDPE. Tensile strength and elongation at break values for the blends were lower than those for the pure polymers, which suggested an incompatibility between the polymers. The values for Young's modulus under tensile increased when PCL was added to LDPE. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91:3909–3914, 2004     

Nanocomposites based on polyethylene and Mg-Al layered double hydroxide. I. Synthesis and characterization

Low density polyethylene (LDPE)/Mg-Al layered double hydroxide (LDH) nanocomposites have been synthesized with different compositions by melt-mixing technique using maleic anhydride grafted polyethylene as compatibilizer. LDH has been modified by sodium dodecylbenzene sulfonate using reconstruction method and characterized by X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. The nanocomposites are characterized by different techniques such as, transmission electron microscopy (TEM), XRD and rheology. The TEM analysis shows a complex nature of particle dispersion in the polymer matrix with wide distribution of particles sizes and shapes. The rheological analysis showed significant changes in linear viscoelastic responses of the composites, even at very low concentration (2 phr) of LDH materials, in comparison to the pure polymer in low frequency regime in dynamic frequency sweep experiments. These changes are related to the LDHs-polymer chains interactions resulting in network-like structure.