Decisive arrival law parameters and a general finite capacity queueing problem

This paper addresses the problem of finding the parameters of the arrival law which most significantly influence expected occupation and loss of a finite capacity queue. The input process is supposed to be ergodic and wide sense stationary. We show that it is mostly possible to fit an MMPP(2) to the decisive parameters of observational data. Numerical examples illustrate the importance of the decisive parameters, called key parameters, and also show the accuracy of the proposed fitting procedure. Finally, in the appendix we present the solution of the finite capacity queueing problem with Special Semi Markov Process (SSMP) arrivals and a general service strategy.     

三脉冲不等强度激光片光源的研制及应用

本文报道了最近研制成功三脉冲不等强度调Q红宝石激光片光源系统.利用小颗粒对片光源90°方向的散射光对动态颗粒场进行高速摄影,从底片中能够精确直观地判断微小颗粒的瞬时分布、运动方向、速度和加速度情况.     

On the dissipation process in Bi2Sr2Ca2Cu3O10 tapes and bulk samples with preferential grain orientation in zero external magnetic field

Current-voltage characteristics of Bi₂Sr₂Ca₂Cu₃O₁₀ tapes and bulk samples with preferentially oriented crystallites have been measured in zero applied magnetic field and for temperatures close to the mean-field critical-temperature,T _c0. It was shown that the power-law dependence,V=AI ^a, valid for two-dimensional systems, does not correctly describe the data, which clearly indicate the existence of a finite critical-current density,J _c. The experimentalI-V curves are fitted quite well with the model which attributes the finite critical-current density to the coupling between the CuO₂ double layers. It was found thatJ _c vanishes at a temperature value belowT _c0. This behavior can result from the occurrence of vortex fluctuation-induced layer decoupling and/or from the contribution of entropy to the vortex unbinding process.     

HDPE的耐磨蚀性与抗冲击性的研究

用自制的旋臂式磨蚀实验仪，研究了５种高密度聚乙烯和１种顺丁橡胶改性的高密度聚乙烯，在铁尾矿和铁精矿浆体中的耐磨蚀性。耐磨蚀性最差的是ＨＤＰＥ２２００Ｊ，耐磨蚀性较差的是ＨＤＰＥ６３００Ｍ；ＨＤＰＥ５０００ｓ，６０９８和２４８０的耐磨蚀性较好；ＨＤＰＥ／ｃｉｓ－ＢＲ的耐磨蚀性最好。     

Information cut for clustering using a gradient descent approach

We introduce a new graph cut for clustering which we call the Information Cut. It is derived using Parzen windowing to estimate an information theoretic distance measure between probability density functions. We propose to optimize the Information Cut using a gradient descent-based approach. Our algorithm has several advantages compared to many other graph-based methods in terms of determining an appropriate affinity measure, computational complexity, memory requirements and coping with different data scales. We show that our method may produce clustering and image segmentation results comparable or better than the state-of-the art graph-based methods.     

双能X射线骨密度仪测定技术研究

以Ｌｕｎａｒ公司ＤＰＸ－Ｌ型双能Ｘ射线骨密度仪为例，研究引起测量误差的主要因素并提出质控措施。用自检模块、腰椎体膜评定仪器的体外测量精度好于１％。对１０位志愿者重复２次测量，体内精度对腰椎，ＭＰＤ（平均百分差）为０．４６，ＣＶ（变异系数）为０．７５；对股骨颈，ＭＰＤ为１．２６、ＣＶ为０．４７；Ｗａｒｄ’ｓ三角区ＭＰＤ为２．０１、ＣＶ为１．１４；大转子ＭＰＤ为１．６６、ＣＶ为０．７２。扫描图像由２位     

High-Pressure (up to 140 MPa) Dynamic Viscosity of the Methane and Toluene System: Measurements and Comparative Study of Some Representative Models

The dynamic viscosity of toluene and methane mixtures containing 25.03, 37.19, 49.95, 64.11, and 95.00 mol% methane has been measured using a falling-body viscometer. The measurements (280 data points) have been performed in the temperature range 293.15 to 373.15 K and at pressures up to 140 MPa. The data have been discussed in the framework of recent representative models (hard-sphere scheme, friction theory, and free-volume model) as well as with simple mixing laws and empirical models (particularly the LBC model and the self-referencing model) used in the literature. This comparative study shows that the average absolute deviation of the models is between 4.9 and 26.8%, and the maximum deviation is between 11.6 and 49.5%.     

沥青输送泵的选型计算

液体沥青是铝用阳极的重要原料之一,其不同温度下的密度、粘度特性和流量、扬程等直接决定了沥青泵的选型,本文以具体的铝用阳极生产为例,对沥青输送泵尤其是齿轮泵的参数选取进行了科学的计算与合理的分析。     

全球电信业发展一览

介绍了世界主要国家和地区电信业的发展情况。     

动态交联热塑性弹性体增韧聚丙烯合金

用动态交联方法制备聚烯烃热塑性弹性体（ＴＰＯ）增韧聚丙烯，制备了具有低温冲击性能良好、综合力学性能比较均衡的聚丙烯合金。同时，研究了ＴＰＯ组成、工艺及基体组成与ＴＰＯ增韧聚丙烯共混物力学性能的关系。并通过差热扫描量热计和扫描电镜考察了共混物的形态结构。