DFMC在水利机械产品开发中的应用研究

分析了DFMC(大规模定制设计)关键技术及相关技术,提出了运用该项技术开发产品企业应作好的前期准备,研究了水利机械产品"大型移动启闭机"的定制开发。     

提高16Mn连铸坯控轧合格率

１６Ｍｎ连涛坯进行控轧时，按铸坯碳当量的上限和下限，分别采用两种不同的控轧制度。在邯钢中板分厂试轧的结果，轧材合格率均达到９６％以上，投产后轧材合格率达到９８％以上。     

The IS Organization of the Future: Four Scenarios for 2020

Four scenarios for the IS organization of 2020 are described, based on differing assumptions about two drivers: the advances in the reliability of international telecommunications and the value placed on computerization in businesses and society.     

摩擦诱发高铬铸铁相变的透射电镜研究

利用透射电子显微镜研究了高铬铸铁在摩擦过程中的显微组织变化。结果表明：奥氏体基体在摩擦应力的作用下发生相变。摩擦表面形成α‘Ｍ。次表层形成γ与α’Ｍ共存区；γ与．ε共存区；γ位错丛聚区。     

新型模具钢012Al在深冷处理过程中的组织转变

本文利用x-射线衍射分析及复型和薄膜透射技术研究了012Al钢经淬火后在深冷处理过程中的组织转变。结果表明,淬火后的残余奥氏体在深冷处理过程中部分转变成马氏体;深冷处理使马氏体发生分解,析出超细碳化物;同时伴有形变晶孪产生。     

Pre-bainitic Transformation in Fe-Ni Alloy

Ｔｈｅｐｒｅ－ｂａｉｎｉｔｉｃｐｈｅｎｏｍｅｎｏｎｉｓｏｎｅｏｆｔｈｅｉｍ－ｐｏｒｔａｎｔｓｕｂｊｅｃｔｓｏｆｂａｉｎｉｔｉｃｔｒａｎｓｆｏｒｍａｔｉｏｎｗｈｉｃｈｉｓｓｔｉｌｃｏｎｔｒｏｖｅｒｓｉａｌ．Ｏｎｅｖｉｅｗｉｓｔｈａｔｔｈｅｓｏｌｕｔｅａ...     

以数字搜索树表示的二值图象的几何变换

本文介绍以数字搜索树表示的二值图象的一种几何变换算法，文中讨论了四分区与正四边区的基本关系，输出ＤＳＴ结点成立的充分条件，给出了完整的几何变换算法并对算法的复杂性作了分析。     

A singular loop transformation framework based on non-singular matrices

In this paper, we discuss a loop transformation framework that is based on integer non-singular matrices. The transformations included in this framework are called Λ-transformations and include permutation, skewing and reversal, as well as a transformation calledloop scaling. This framework is more general than existing ones; however, it is also more difficult to generate code in our framework. This paper shows how integer lattice theory can be used to generate efficient code. An added advantage of our framework over existing ones is that there is a simple completion algorithm which, given a partial transformation matrix, produces a full transformation matrix that satisfies all dependences. This completion procedure has applications in parallelization and in the generation of code for NUMA machines. This work was supported by the Cornell Theory Center, NSF Presidential Young Investigator award #CCR-8958543. by NSF Grant #CCR-9008526, and by a grant from the Hewlett-Packard Company.     

智能化红外焊缝检测仪的实时信号自相关分析

详细介绍了在改进红外焊缝检测仪的过程中实时信号的一种抗干扰方法－－自相关方法。重点离自相关方法的数学模型，软件框图及设计思想，并给出了实验结果。     

一种改进的灰度预测模型

灰色预测模型通常是GM模型,但预测精度有时不令人满意。在对模型GM做了进一步研究的基础上,提出了一个预测精度较高的新灰色预测模型,并从理论上证明了这种模型可以有效提高建模数据序列的光滑度。最后把此方法应用于东部某镇GDP的建模中,试验结果表明该方法是可行且有效的,所建模型的精度优于传统GM（1,1）模型的精度。