镀锌钢管双引出工艺设备的探讨

分析了我国镀锌钢管双引出工艺设备的现状。介绍了星轮齿盘式与螺旋式双引出工艺设备的特点，指出双排螺旋机组的综合指标较高，并对齿盘式双引出机组的磁力辊道及镀后处理设备提出了改进设想。     

软测量建模方法分析

介绍软测量技术的基本原理，论述了工业过程控制中常用的六种软测量建模方法及其优缺点，指出软测量技术与其它技术相结合，将会取得更广泛的应用。     

新型硬齿面环面蜗杆传动研究

采用精确磨削TI蜗杆的砂轮，用类似直廓环面蜗杆或平面包络环面蜗杆的磨削方法加工环面蜗杆，使该蜗杆和齿面形状与砂轮曲面相同的蜗轮相配合，形成一种新型蜗杆传动，给出了这种传动蜗杆副齿面的数学模型，并通过计算机仿真得出了这种传动蜗轮齿面上接触线的形状及分布特征，初步分析了其啮合特点。     

神经网络在电液位置伺服系统中的应用

设计了基于BP神经网络的自适应PID控制器，该控制器充分利用了经典PID控制算法简单的特点，又利用了神经网络良好的自适应和抗干扰能力，通过神经网络的学习和对系统的在线辨识，自适应调整PID参数，使控制系统对参数变化表现出良好的鲁棒性和控制性能，并通过仿真证明了所设计系统的合理性。     

圆柱体相贯线上的圆角表示方法

在机械设计中，圆柱体相贯线上的圆角表示方法是CAD和计算机辅助设计中的难题，所有的CAD／CAM软件都没有这一功能，多数使用者采用的是各种近似方法。本文介绍了严密精确的设计和几何造型方法，可用于大型铸锻件和重型机械的CAD和计算机辅助设计。     

复合材料夹层结构产品固化变形分析

本文讨论产生复合材料产品固化变形的主要原因是树脂收缩引起的各方向上不同的线膨胀系数具体分析了复合材料夹层结构的的固化变形，经技术上的改进解决了固化变形，以满足产品的设计要求。     

A framework for variable content document generation with multiple actors

ContextAdvances in customization have highlighted the need for tools supporting variable content document management and generation in many domains. Current tools allow the generation of highly customized documents that are variable in both content and layout. However, most frameworks are technology-oriented, and their use requires advanced skills in implementation-related tools, which means their use by end users (i.e. document designers) is severely limited.ObjectiveStarting from past and current trends for customized document authoring, our goal is to provide a document generation alternative in which variants are specified at a high level of abstraction and content reuse can be maximized in high variability scenarios.MethodBased on our experience in Document Engineering, we identified areas in the variable content document management and generation field open to further improvement. We first classified the primary sources of variability in document composition processes and then developed a methodology, which we called DPL – based on Software Product Lines principles – to support document generation in high variability scenarios.ResultsIn order to validate the applicability of our methodology we implemented a tool – DPLfw – to carry out DPL processes. After using this in different scenarios, we compared our proposal with other state-of-the-art tools for variable content document management and generation.ConclusionThe DPLfw showed a good capacity for the automatic generation of variable content documents equal to or in some cases surpassing other currently available approaches. To the best of our knowledge, DPLfw is the only framework that combines variable content and document workflow facilities, easing the generation of variable content documents in which multiple actors play different roles.     

炼石水泥厂2300t/d熟料生产线的达产达标

福建水泥股份有限公司炼石水泥厂2300t／d生产线(即#4窑)由南京水泥工业设计研究院开发设计，2000年11月动工，建设周期为10个月，2001年9月即实现3d达标考核该线大量采用国产化设备，烧成系统、窑头喷煤管、煤磨系统等应用南京院专有专利技术2002年共生产熟料71．54万t，28d强度平均达57.3MPa，全年运转率达83．6％，全面实现了达产达标。     

A novel method for camera external parameters online calibration using dotted road line

On board camera is the most important information source for driver assistant application which is based on computer vision. One problem for on board camera is that the external parameters are easy to be changed when moving on the road. Traditional method either calibrates external parameters offline or calibrates external parameters semi-online, which both need human intervention. By observation, it is found that corner connection of dotted road lane can form two groups of parallel lines. Using this geometric characteristics and through theoretical derivation, a novel online camera external parameter calibration method is proposed which focus on the situation when vehicle is moving. The pro of this method is that it maintains relatively high calculation accuracy and more important, it does not require any human intervention in whole calibration process. Experimental and comparison results show that this method is simple and have accurate results which fully meet the requirements of practical application.     

Modeling and solving mixed-model assembly line balancing problem with setups. Part I: A mixed integer linear programming model

This paper is the first one of the two papers entitled “modeling and solving mixed-model assembly line balancing problem with setups”, which has the aim of developing the mathematical programming formulation of the problem and solving it with a hybrid meta-heuristic approach. In this current part, a mixed-integer linear mathematical programming (MILP) model for mixed-model assembly line balancing problem with setups is developed. The proposed MILP model considers some particular features of the real world problems such as parallel workstations, zoning constraints, and sequence dependent setup times between tasks, which is an actual framework in assembly line balancing problems. The main endeavor of Part-I is to formulate the sequence dependent setup times between tasks in type-I mixed-model assembly line balancing problem. The proposed model considers the setups between the tasks of the same model and the setups because of the model switches in any workstation. The capability of our MILP is tested through a set of computational experiments. Part-II tackles the problem with a multiple colony hybrid bees algorithm. A set of computational experiments is also carried out for the proposed approach in Part-II.